Properties of various CaO-Al2O3-TiO2 refractories and their reaction behaviours in contact with Ti6Al4V melts

[1]  H. Gu,et al.  Improved Mechanical Properties of Alumina Ceramics Using Plasma-Assisted Milling Technique , 2023, Materials.

[2]  Di Chen,et al.  Gas corrosion behavior of calcium hexaluminate materials for hydrogen metallurgy , 2023, Ceramics International.

[3]  Xionggang Lu,et al.  BaZrO3 refractory crucibles for vacuum induction melting of industrial Zr-based bulk metallic glass master alloys with Y addition , 2022, Journal of the European Ceramic Society.

[4]  P. Verma,et al.  Titanium-based materials: synthesis, properties, and applications , 2022, Materials Today: Proceedings.

[5]  Pallavi Pushp,et al.  Classification and applications of titanium and its alloys , 2022, Materials Today: Proceedings.

[6]  Junfeng Chen,et al.  The influence of tricalcium aluminate on the microstructure evolution of CaO specimen during hydration , 2021, Journal of the European Ceramic Society.

[7]  S. Or,et al.  Design, fabrication and properties of lightweight wear lining refractories: A review , 2021, Journal of the European Ceramic Society.

[8]  Xionggang Lu,et al.  Failure mechanism of the Y2O3 doped BaZrO3/Al2O3 composite ceramic mould during directional solidification of TiAl-Based alloys , 2021, Ceramics International.

[9]  M. Franke,et al.  Designing advanced intermetallic titanium aluminide alloys for additive manufacturing , 2021, Intermetallics.

[10]  Junfeng Chen,et al.  Improved hydration resistance of CaO granules via sol‐processed metal oxide protective layers , 2021 .

[11]  Yanchun Zhou,et al.  (Ca,Sr,Ba)ZrO3: A promising entropy-stabilized ceramic for titanium alloys smelting , 2021 .

[12]  Hongjun Ji,et al.  Interfacial microstructure and mechanical properties of ultrasonic-assisted brazing joints between Ti–6Al–4V and ZrO2 , 2020 .

[13]  V. Linkov,et al.  A review on crucibles for induction melting of titanium alloys , 2020 .

[14]  B. Han,et al.  Improvement in hydration resistance of CaO granules by addition of Zr(OH)4 and Al(OH)3 , 2018, Journal of the American Ceramic Society.

[15]  Xionggang Lu,et al.  Evaluation of Ca-doped BaZrO3 as the crucible refractory for melting TiAl alloys , 2018, Ceramics International.

[16]  Xionggang Lu,et al.  On the Modification of Hydration Resistance of CaO With ZrO2 Additive , 2016 .

[17]  Min Chen,et al.  Effect of TiO2 addition on the sintering densification and mechanical properties of MgAl2O4–CaAl4O7–CaAl12O19 composite , 2016 .

[18]  J. Hubálková,et al.  Corrosion behavior of calcium zirconate refractories in contact with titanium aluminide melts , 2015 .

[19]  J. Liu,et al.  Microstructure evolution and interfacial reaction of TiAl–Si alloy solidified in alumina crucible , 2015 .

[20]  Xionggang Lu,et al.  Preparation of TiFe based alloys melted by CaO crucible and its hydrogen storage properties , 2015 .

[21]  Junfeng Chen,et al.  Effect of TiO2 addition on microstructure and strength of porous spinel (MgAl2O4) ceramics prepared from magnesite and Al(OH)3 , 2015 .

[22]  P. Ma,et al.  Interfacial reactions between Ti-1100 alloy and CaO crucible during casting process , 2014 .

[23]  Li Jinshan,et al.  Interface Reaction between Ceramic Moulds and High Nb-TiAl Alloys , 2013 .

[24]  H. Zhang,et al.  Comparison of directional solidification of γ-TiAl alloys in conventional Al2O3 and novel Y2O3-coated Al2O3 crucibles , 2013 .

[25]  H. Harada,et al.  The influence of oxygen concentration and phase composition on the manufacturability and high-temperature strength of Ti–42Al–5Mn (at%) forged alloy , 2013 .

[26]  L. Bolzoni,et al.  PM processing and characterisation of Ti–7Fe low cost titanium alloys , 2011 .

[27]  Jingjie Guo,et al.  Microstructure evolution in directionally solidified Ti–(50, 52) at%Al alloys , 2011 .

[28]  Yao-Wen Chang,et al.  Compositional Dependence of Phase Formation Mechanisms at the Interface Between Titanium and Calcia‐Stabilized Zirconia at 1550°C , 2010 .

[29]  Toshiharu Kobayashi,et al.  Evaluation of Yttria Applicability as a Crucible for Induction Melting of TiAl Alloy , 2010 .

[30]  R. Nowak,et al.  Surface tension of γ-TiAl-based alloys , 2010 .

[31]  A. Kostov,et al.  Predicting thermodynamic stability of crucible oxides in molten titanium and titanium alloys , 2006 .

[32]  C. Aneziris,et al.  Investigating the corrosion resistance of calcium zirconate in contact with titanium alloy melts , 2015 .

[33]  Toshiharu Kobayashi,et al.  Structural optimization of an yttria crucible for melting TiAl alloy , 2012 .