Ytterbium fiber laser welding of Ti6Al4V alloy

Abstract In this work, full penetration welding of 2 mm thick Ti6Al4V plates in butt configuration was performed by adopting a high brightness Yb fiber laser. Neither groove preparation nor filler groove was used. The influence of different welding conditions on the bead morphology, metallurgy and mechanical properties was discussed in detail. Seam appearance and microstructures were assessed by optical microscopy, while the mechanical behavior was evaluated in terms of Vickers micro-hardness and tensile strength. Fracture surfaces were inspected by scanning electron microscopy. The efficiency of the welding process was estimated by correlating the power transmitted and the extension of the fusion zone. The defectiveness of the bead geometry was minimized by optimizing the welding conditions.

[1]  John C. Ion,et al.  Laser Processing of Engineering Materials: Principles, Procedure and Industrial Application , 2005 .

[2]  Vittorio Alfieri,et al.  Investigation and Optimization of Laser Welding of Ti-6Al-4 V Titanium Alloy Plates , 2013 .

[3]  V. Balasubramanian,et al.  Effect of pulsed gas tungsten arc welding on corrosion behavior of Ti–6Al–4V titanium alloy , 2008 .

[4]  D. Yapp,et al.  Analysis of Beam Material Interaction in Welding of Titanium with Fiber Lasers , 2007 .

[5]  Yanyan Zhu,et al.  A comparative study of laser beam welding and laser–MIG hybrid welding of Ti–Al–Zr–Fe titanium alloy , 2011 .

[6]  M. Rethmeier,et al.  Laser Beam Welding of Thick Titanium Sheets in the Field of Marine Technology , 2014 .

[7]  T. Sınmazçelik,et al.  Laser welding of Ti6Al4V titanium alloys , 2009 .

[8]  Jose Mathew,et al.  Investigations into the effects of electron beam welding on thick Ti–6Al–4V titanium alloy , 2007 .

[9]  S. Lathabai,et al.  Comparison of keyhole and conventional gas tungsten arc welds in commercially pure titanium , 2001 .

[10]  H. Kokawa,et al.  Development of grain structure during friction stir welding of pure titanium , 2009 .

[11]  Giuseppe Casalino,et al.  Investigation on Ti6Al4V laser welding using statistical and Taguchi approaches , 2005 .

[12]  C. Veiga,et al.  PROPERTIES AND APPLICATIONS OF TITANIUM ALLOYS: A BRIEF REVIEW , 2012 .

[13]  Jianxun Zhang,et al.  Porosity and microstructure in pulsed Nd:YAG laser welded Ti6Al4V sheet , 2014 .

[14]  M. Ramulu,et al.  Characterization of tensile behavior in friction stir-welded titanium alloy, Ti-6Al-4V , 2009 .

[15]  Antonino Squillace,et al.  Effect of welding parameters on morphology and mechanical properties of Ti–6Al–4V laser beam welded butt joints , 2012 .

[16]  Vinícius Andrés R. Henriques,et al.  Titanium production for aerospace applications , 2009 .

[17]  M. Hashmi,et al.  Effect of laser welding parameters on the heat input and weld-bead profile , 2005 .

[18]  Jianxun Zhang,et al.  Numerical simulation of full penetration laser welding of thick steel plate with high power high brightness laser , 2014 .

[19]  M. Meyers,et al.  Biomedical applications of titanium and its alloys , 2008 .

[20]  Christoph Leyens,et al.  Titanium Alloys for Aerospace Applications , 2003 .