Visible light induced electropolymerization of suspended hydrogel bioscaffolds in a microfluidic chip.

The development of microengineered hydrogels co-cultured with cells in vitro could advance in vivo bio-systems in both structural complexity and functional hierarchy, which holds great promise for applications in regenerative tissues or organs, drug discovery and screening, and bio-sensors or bio-actuators. Traditional hydrogel microfabrication technologies such as ultraviolet (UV) laser or multiphoton laser stereolithography and three-dimensional (3D) printing systems have advanced the development of 3D hydrogel micro-structures but need either expensive and complex equipment, or harsh material selection with limited photoinitiators. Herein, we propose a simple and flexible hydrogel microfabrication method based on a ubiquitous visible-light projection system combined with a custom-designed photosensitive microfluidic chip, to rapidly (typically several to tens of seconds) fabricate various two-dimensional (2D) hydrogel patterns and 3D hydrogel constructs. A theoretical layer-by-layer model that involves continuous polymerizing-delaminating-polymerizing cycles is presented to explain the polymerization and structural formation mechanism of hydrogels. A large area of hydrogel patterns was efficiently fabricated without the usage of costly laser systems or photoinitiators, i.e., a stereoscopic mesh-like hydrogel network with intersecting hydrogel micro-belts was fabricated via a series of dynamic-changing digital light projections. The pores and gaps of the hydrogel network are tunable, which facilitates the supply of nutrients and discharge of waste in the construction of 3D thick bio-models. Cell co-culture experiments showed the effective regulation of cell spreading by hydrogel scaffolds fabricated by the new method presented here. This visible light enabled hydrogel microfabrication method may provide new prospects for designing cell-based units for advanced biomedical studies, e.g., for 3D bio-models or bio-actuators in the future.

[1]  D. Huh,et al.  Organs-on-chips at the frontiers of drug discovery , 2015, Nature Reviews Drug Discovery.

[2]  James J. Yoo,et al.  A 3D bioprinting system to produce human-scale tissue constructs with structural integrity , 2016, Nature Biotechnology.

[3]  John R. Tumbleston,et al.  Continuous liquid interface production of 3D objects , 2015, Science.

[4]  A. Khademhosseini,et al.  Microengineered 3D cell‐laden thermoresponsive hydrogels for mimicking cell morphology and orientation in cartilage tissue engineering , 2017, Biotechnology and bioengineering.

[5]  D. L. Staebler,et al.  Optically induced conductivity changes in discharge‐produced hydrogenated amorphous silicon , 1980 .

[6]  Ming C. Wu,et al.  Massively parallel manipulation of single cells and microparticles using optical images , 2005, Nature.

[7]  Kathleen A Fitzgerald,et al.  Life in 3D is never flat: 3D models to optimise drug delivery. , 2015, Journal of controlled release : official journal of the Controlled Release Society.

[8]  Steven C George,et al.  A vascularized and perfused organ-on-a-chip platform for large-scale drug screening applications. , 2017, Lab on a chip.

[9]  Hsan-Yin Hsu,et al.  Parallel single-cell light-induced electroporation and dielectrophoretic manipulation. , 2009, Lab on a chip.

[10]  Heather N. Hayenga,et al.  PEGDA hydrogels with patterned elasticity: Novel tools for the study of cell response to substrate rigidity , 2010, Biotechnology and bioengineering.

[11]  A. Nakayama,et al.  Photovoltaic water electrolysis using the sputter-deposited a-Si/c-Si solar cells , 2001 .

[12]  Wenfeng Liang,et al.  Extracellular-controlled breast cancer cell formation and growth using non-UV patterned hydrogels via optically-induced electrokinetics. , 2014, Lab on a chip.

[13]  Yi Li,et al.  Fabrication of High-Aspect-Ratio 3D Hydrogel Microstructures Using Optically Induced Electrokinetics , 2016, Micromachines.

[14]  Wim E Hennink,et al.  25th Anniversary Article: Engineering Hydrogels for Biofabrication , 2013, Advanced materials.

[15]  K Sternberg,et al.  Three-dimensional laser micro- and nano-structuring of acrylated poly(ethylene glycol) materials and evaluation of their cytoxicity for tissue engineering applications. , 2011, Acta biomaterialia.

[16]  Ali Khademhosseini,et al.  Cardiovascular Organ-on-a-Chip Platforms for Drug Discovery and Development. , 2016, Applied in vitro toxicology.

[17]  Feifei Wang,et al.  Optically induced electrohydrodynamic instability-based micro-patterning of fluidic thin films , 2013, Microfluidics and Nanofluidics.

[18]  Rashid Bashir,et al.  Three-dimensional photopatterning of hydrogels using stereolithography for long-term cell encapsulation. , 2010, Lab on a chip.

[19]  A. Abbott.  Cell culture: Biology's new dimension , 2003, Nature.

[20]  Liju Yang,et al.  Three-dimensional cell culture systems and their applications in drug discovery and cell-based biosensors. , 2014, Assay and drug development technologies.

[21]  Haibo Yu,et al.  Rapid Fabrication of Hydrogel Microstructures Using UV-Induced Projection Printing , 2015, Micromachines.

[22]  Lianqing Liu,et al.  Non-ultraviolet-based patterning of polymer structures by optically induced electrohydrodynamic instability , 2013 .

[23]  Lianqing Liu,et al.  3-D Non-UV Digital Printing of Hydrogel Microstructures by Optically Controlled Digital Electropolymerization , 2015, Journal of Microelectromechanical Systems.

[24]  J. Zhong,et al.  Control of cell growth on 3D-printed cell culture platforms for tissue engineering. , 2017, Journal of biomedical materials research. Part A.

[25]  Enas M. Ahmed,et al.  Hydrogel: Preparation, characterization, and applications: A review , 2013, Journal of advanced research.

[26]  Sigrid A. Langhans.  Three-Dimensional in Vitro Cell Culture Models in Drug Discovery and Drug Repositioning , 2018, Front. Pharmacol..

[27]  Les A. Piegl,et al.  Ten challenges in 3D printing , 2015, Engineering with Computers.

[28]  D. Ingber,et al.  Microfluidic organs-on-chips , 2014, Nature Biotechnology.

[29]  Maria Farsari,et al.  Direct laser writing , 2015 .

[30]  Kristi S. Anseth,et al.  Photodegradable Hydrogels for Dynamic Tuning of Physical and Chemical Properties , 2009, Science.

[31]  Zhipan Liu,et al.  Electrochemical reactions at the electrode/solution interface: Theory and applications to water electrolysis and oxygen reduction , 2010 .

[32]  Pu Chen,et al.  Towards artificial tissue models: past, present, and future of 3D bioprinting , 2016, Biofabrication.

[33]  Nupura S. Bhise,et al.  A liver-on-a-chip platform with bioprinted hepatic spheroids , 2016, Biofabrication.

[34]  Balázs Farkas,et al.  Photoinitiator-free 3D scaffolds fabricated by excimer laser photocuring , 2017, Nanotechnology.

[35]  F. Pampaloni,et al.  The third dimension bridges the gap between cell culture and live tissue , 2007, Nature Reviews Molecular Cell Biology.

[36]  Wenfeng Liang,et al.  Fabrication of Micrometer- and Nanometer-Scale Polymer Structures by Visible Light Induced Dielectrophoresis (DEP) Force , 2011, Micromachines.

[37]  Paul Vulto,et al.  Kidney-on-a-Chip Technology for Drug-Induced Nephrotoxicity Screening. , 2016, Trends in biotechnology.

[38]  Ali Khademhosseini,et al.  Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography. , 2012, Biomaterials.

[39]  Ron Weiss,et al.  Formation and optogenetic control of engineered 3D skeletal muscle bioactuators. , 2012, Lab on a chip.

[40]  Anthony Atala,et al.  3D bioprinting of tissues and organs , 2014, Nature Biotechnology.

[41]  Jean-Louis Viovy,et al.  A review of microfabrication and hydrogel engineering for micro-organs on chips. , 2014, Biomaterials.