Evaluation of energy consumption during production and construction of concrete and steel frames of residential buildings

Abstract There is a growing attention to energy consumption (EC) of buildings during their life cycle. The construction phase has been less considered due to its small share of the EC in buildings life cycle, as well as the lack and inconsistency of data, especially in developing countries. The purpose of this research is to evaluate the EC during production and construction (PAC) of concrete and steel frames of residential buildings. To address the mentioned purpose, the EC during PAC of frames of 14 concrete and steel framed buildings in Iran’s capital city, Tehran, is studied. The findings show that the EC during PAC of concrete frames is about 27% less than steel frames. Comparison of EC during various PAC processes shows that production of steel is the most energy consumed process. As an example, considering total area of residential buildings constructed in Tehran in 2014, replacing steel frames by concrete could lead to 13% energy saving. Moreover, with respect to optimistic and pessimistic evaluated values of EC during PAC of concrete and steel frames of buildings constructed in the mentioned year, about 43% of energy can be saved.

[1]  V. Nelson,et al.  Introduction to Renewable Energy , 2011 .

[2]  R. Belarbi,et al.  Assessment of green roof thermal behavior: A coupled heat and mass transfer model , 2011 .

[3]  Appu Haapio,et al.  A critical review of building environmental assessment tools , 2008 .

[4]  Monto Mani,et al.  Embodied and operational energy of urban residential buildings in India , 2016 .

[5]  Ambrose Dodoo,et al.  Energy use and overheating risk of Swedish multi-storey residential buildings under different climate scenarios , 2016 .

[6]  L. Gustavsson,et al.  Life cycle primary energy analysis of residential buildings , 2010 .

[7]  Guoqian Chen,et al.  Embodied energy consumption of building construction engineering: Case study in E-town, Beijing , 2013 .

[8]  Michael D. Lepech,et al.  Application of life-cycle assessment to early stage building design for reduced embodied environmental impacts , 2013 .

[9]  Ho Chin Siong,et al.  Assessment of embodied energy and global warming potential of building construction using life cycle analysis approach: Case studies of residential buildings in Iskandar Malaysia , 2015 .

[10]  John S. Monahan,et al.  An embodied carbon and energy analysis of modern methods of construction in housing: A case study us , 2011 .

[11]  Constantinos A. Balaras,et al.  Heating energy consumption and resulting environmental impact of European apartment buildings , 2005 .

[12]  R. L. Sawhney,et al.  Effect of construction materials on embodied energy and cost of buildings—A case study of residential houses in India up to 60 m2 of plinth area , 2014 .

[13]  Robert Ries,et al.  Example of a Hybrid Life-Cycle Assessment of Construction Processes , 2006 .

[14]  Aurora L. Sharrard,et al.  Environmental Implications of Construction Site Energy Use and Electricity Generation1 , 2007 .

[15]  Zhang Xu,et al.  Inventory analysis of LCA on steel- and concrete-construction office buildings , 2008 .

[16]  A Jrade,et al.  Integrating Building Information Modeling and Life Cycle Assessment Tools to Design Sustainable Buildings , 2012 .

[17]  Kari Alanne,et al.  The effect of material selection on life cycle energy balance: A case study on a hypothetical building model in Finland , 2015 .

[18]  Hans-Jürgen Dr. Klüppel,et al.  The Revision of ISO Standards 14040-3 - ISO 14040: Environmental management – Life cycle assessment – Principles and framework - ISO 14044: Environmental management – Life cycle assessment – Requirements and guidelines , 2005 .

[19]  Oscar Ortiz,et al.  Sustainability in the construction industry: A review of recent developments based on LCA , 2009 .

[20]  Shen Tan,et al.  Life cycle assessment of a single-family residential building in Canada: A case study , 2014 .

[21]  Catarina Thormark,et al.  The effect of material choice on the total energy need and recycling potential of a building , 2006 .

[22]  Ravi Prakash,et al.  Life cycle energy analysis of buildings: An overview , 2010 .

[23]  L. Gustavsson,et al.  Variability in energy and carbon dioxide balances of wood and concrete building materials , 2006 .

[24]  Paolo Foraboschi,et al.  Sustainable structural design of tall buildings based on embodied energy , 2014 .

[25]  Krushna Mahapatra,et al.  Perceptions, attitudes and interest of Swedish architects towards the use of wood frames in multi-storey buildings , 2011 .

[26]  Jun Guan,et al.  Quantification of building embodied energy in China using an input–output-based hybrid LCA model , 2016 .

[27]  Luisa F. Cabeza,et al.  Life cycle assessment (LCA) and life cycle energy analysis (LCEA) of buildings and the building sector: A review , 2014 .

[28]  Arpad Horvath,et al.  Framework for Environmental Analysis of Commercial Building Structures , 2003 .

[29]  Arpad Horvath,et al.  Comparison of Environmental Effects of Steel- and Concrete-Framed Buildings , 2005 .

[30]  Gholamreza Heravi,et al.  Energy performance of buildings: The evaluation of design and construction measures concerning building energy efficiency in Iran , 2014 .

[31]  David R. Riley,et al.  Sustainable performance criteria for construction method selection in concrete buildings , 2010 .

[32]  Sivakumar Palaniappan,et al.  A case study on life cycle energy use of residential building in Southern India , 2014 .

[33]  Brian Norton,et al.  Including embodied energy considerations at the conceptual stage of building design , 2006 .

[34]  Michael D. Lepech,et al.  Cradle-to-gate sustainable target value design: integrating life cycle assessment and construction management for buildings , 2015 .