Enhanced IMC based PID controller design for non-minimum phase (NMP) integrating processes with time delays.

Internal model control (IMC) with optimal H2 minimization framework is proposed in this paper for design of proportional-integral-derivative (PID) controllers. The controller design is addressed for integrating and double integrating time delay processes with right half plane (RHP) zeros. Blaschke product is used to derive the optimal controller. There is a single adjustable closed loop tuning parameter for controller design. Systematic guidelines are provided for selection of this tuning parameter based on maximum sensitivity. Simulation studies have been carried out on various integrating time delay processes to show the advantages of the proposed method. The proposed controller provides enhanced closed loop performances when compared to recently reported methods in the literature. Quantitative comparative analysis has been carried out using the performance indices, Integral Absolute Error (IAE) and Total Variation (TV).

[1]  Moonyong Lee,et al.  Design of advanced PID controller for enhanced disturbance rejection of second-order processes with time delay , 2008 .

[2]  Su Whan Sung,et al.  On-Line Process Identification and Autotuning for Integrating Processes , 1997 .

[3]  Qibing Jin,et al.  Analytical IMC-PID design in terms of performance/robustness tradeoff for integrating processes: From 2-Dof to 1-Dof , 2014 .

[4]  R. Padma Sree,et al.  A simple method of tuning PID controllers for integrator/dead-time processes , 2003, Comput. Chem. Eng..

[5]  Su Whan Sung,et al.  Modified Smith Predictors for Integrating Processes: Comparisons and Proposition , 2001 .

[6]  M. Chidambaram,et al.  Set point weighted modified Smith predictor with PID filter controllers for non-minimum-phase (NMP) integrating processes , 2010 .

[7]  Chang-Chieh Hang,et al.  A modified Smith predictor for a process with an integrator and long dead time , 2003 .

[8]  Ian Postlethwaite,et al.  Multivariable Feedback Control: Analysis and Design , 1996 .

[9]  R. Padma Sree,et al.  Tuning of IMC based PID controllers for integrating systems with time delay. , 2016, ISA transactions.

[10]  Tao Liu,et al.  Enhanced IMC design of load disturbance rejection for integrating and unstable processes with slow dynamics. , 2011, ISA transactions.

[11]  Moonyong Lee,et al.  PID controller design for integrating processes with time delay , 2008 .

[12]  A. Seshagiri Rao,et al.  ENHANCED IMC-PID CONTROLLER DESIGN WITH LEAD-LAG FILTER FOR UNSTABLE AND INTEGRATING PROCESSES WITH TIME DELAY , 2014 .

[13]  Hsiao-Ping Huang,et al.  Optimal H2 IMC-PID Controller with Set-Point Weighting for Time-Delayed Unstable Processes , 2011 .

[14]  Wenjian Cai,et al.  Advanced proportional-integral-derivative tuning for integrating and unstable processes with gain and phase margin specifications , 2002 .

[15]  Wei Xing Zheng,et al.  A double two-degree-of-freedom control scheme for improved control of unstable delay processes , 2005 .

[16]  Wonhui Cho,et al.  Simple analytic PID controller tuning rules revisited , 2014 .

[17]  Tao Liu,et al.  New modified Smith predictor scheme for integrating and unstable processes with time delay , 2005 .

[18]  I. Kaya,et al.  Two-degree-of-freedom IMC structure and controller design for integrating processes based on gain and phase-margin specifications , 2004 .

[19]  Moonyong Lee,et al.  Analytical design of enhanced PID filter controller for integrating and first order unstable processes with time delay , 2008 .

[20]  M. Chidambaram,et al.  Direct synthesis-based controller design for integrating processes with time delay , 2009, J. Frankl. Inst..

[21]  C. C. Hang,et al.  A new Smith predictor for controlling a process with an integrator and long dead-time , 1994, IEEE Trans. Autom. Control..

[22]  Tao Liu,et al.  Analytical design of two-degree-of-freedom control scheme for open-loop unstable processes with time delay , 2005 .

[23]  Qi Wang,et al.  A Novel TDF Control Scheme for Integrating and Double Integrating Processes with Time Delay Based on Modified IMC Structure , 2016 .

[24]  Sigurd Skogestad,et al.  Simple analytic rules for model reduction and PID controller tuning , 2003 .

[25]  Ch Anil,et al.  Tuning of PID controllers for integrating systems using direct synthesis method. , 2015, ISA transactions.

[26]  A Seshagiri Rao,et al.  Set point weighted modified Smith predictor for integrating and double integrating processes with time delay. , 2007, ISA transactions.

[27]  Somanath Majhi,et al.  PID controller tuning for integrating processes. , 2010, ISA transactions.

[28]  Sunwon Park,et al.  PID controller tuning for integrating and unstable processes with time delay , 2000 .

[29]  Neng-Sheng Pai,et al.  Tuning PI/PID controllers for integrating processes with deadtime and inverse response by simple calculations , 2010 .

[30]  Evanghelos Zafiriou,et al.  Robust process control , 1987 .