Crashing analysis and multiobjective optimization for thin-walled structures with functionally graded thickness

Abstract Thin-walled structures have exhibited significant advantages in light weight and energy absorption and been widely applied in automotive, aerospace, transportation and defense industries. Unlike existing thin-walled structures with uniform thickness, this paper introduces functionally graded structures with changing wall thickness along the longitudinal direction in a certain gradient (namely, functionally graded thickness – FGT). Its crashing behaviors are the key topics of the present study. We examine the crashing characteristics of functionally graded thin-walled structures and evaluate the effect of different thickness gradient patterns on crashing behaviors. It is shown that the gradient exponent parameter n that controls the variation of thickness has significant effect on crashworthiness. To optimize crashworthiness of the FGT tubes, the Non-dominated Sorting Genetic Algorithm (NSGA-II) is used to seek for an optimal gradient, where a surrogate modeling method, specifically response surface method (RSM), is adopted to formulate the specific energy absorption (SEA) and peak crashing force functions. The results yielded from the optimization indicate that the FGT tube is superior to its uniform thickness counterparts in overall crashing behaviors. Therefore, FGT thin-walled structures are recommended as a potential absorber of crashing energy.

[1]  M. Langseth,et al.  Axial crushing of thin-walled high-strength steel sections , 2006 .

[2]  Ali Limam,et al.  Experimental and numerical investigation of static and dynamic axial crushing of circular aluminum tubes , 2004 .

[3]  Reiner Kopp,et al.  Numerical research and optimisation of high pressure sheet metal forming of tailor rolled blanks , 2006 .

[4]  Qing Li,et al.  Identification of Material Parameters for High Strength Steel Under Impact Loading , 2011 .

[5]  A. A. Zadpoor,et al.  Mechanics of Tailor Welded Blanks: An Overview , 2007 .

[6]  S.T.S. Al-Hassani,et al.  Axial crushing of wood-filled square metal tubes , 1993 .

[7]  Hasan Kurtaran,et al.  Crashworthiness design optimization using successive response surface approximations , 2002 .

[8]  S. Baskar,et al.  NSGA-II algorithm for multi-objective generation expansion planning problem , 2009 .

[9]  Xu Han,et al.  Multiobjective optimization for tapered circular tubes , 2011 .

[10]  Qing Li,et al.  Multiobjective optimization for crash safety design of vehicles using stepwise regression model , 2008 .

[11]  R. Davies,et al.  Mechanical properties of aluminum tailor welded blanks at superplastic temperatures , 2002 .

[12]  T. Simpson,et al.  Comparative studies of metamodelling techniques under multiple modelling criteria , 2001 .

[13]  Adnan M. Al-Smadi,et al.  Space partitioning in engineering design via metamodel acceptance score distribution , 2007, Engineering with Computers.

[14]  Hui Zhang,et al.  Optimal design of functionally graded foam material under impact loading , 2013 .

[15]  Guangyao Li,et al.  Crashworthiness design of vehicle by using multiobjective robust optimization , 2011 .

[16]  Mojtaba Sadighi,et al.  Experimental and analytical assessment of axial crushing of circular hybrid tubes under quasi-static load , 2012 .

[17]  A. Najafi,et al.  Sequential coupled process-performance simulation and multi-objective optimization of thin-walled tubes , 2012 .

[18]  Hui Zhang,et al.  Experimental and numerical investigation on crush resistance of polygonal columns and angle elements , 2012 .

[19]  Klaus-Jürgen Bathe,et al.  Crushing and crashing of tubes with implicit time integration , 2012 .

[20]  T. Wierzbicki,et al.  Axial Crushing of Multicorner Sheet Metal Columns , 1989 .

[21]  David P. Thambiratnam,et al.  A numerical study on the impact response and energy absorption of tapered thin-walled tubes , 2004 .

[22]  Mark White,et al.  Experimental quasi-static axial crushing of top-hat and double-hat thin-walled sections , 1999 .

[23]  Qing Li,et al.  Radial basis functional model for multi-objective sheet metal forming optimization , 2011 .

[24]  Wei Li,et al.  Multiobjective optimization of multi-cell sections for the crashworthiness design , 2008 .

[25]  E. Acar,et al.  Multi-objective crashworthiness optimization of tapered thin-walled tubes with axisymmetric indentations , 2011 .

[26]  Abdulmalik A. Alghamdi,et al.  Collapsible impact energy absorbers: an overview , 2001 .

[27]  Ping Zhu,et al.  Lightweight design of vehicle front–end structure: contributions of multiple surrogates , 2011 .

[28]  Norman Jones,et al.  Dynamic progressive buckling of circular and square tubes , 1986 .

[29]  W. Abramowicz,et al.  Thin-walled structures as impact energy absorbers , 2003 .

[30]  Lizhong Liu Ping HUXianghua Liu Huawei Zhang.  Springback characteristics in U-channel forming of tailor rolled blank , 2012 .

[31]  Qiang Li,et al.  A two-stage multi-objective optimisation of vehicle crashworthiness under frontal impact , 2008 .

[32]  F. Rammerstorfer,et al.  Experimental studies on the quasi-static axial crushing of steel columns filled with aluminium foam , 2000 .

[33]  A. Toksoy,et al.  Quasi-static axial crushing of extruded polystyrene foam-filled thin-walled aluminum tubes: Experimental and numerical analysis , 2006 .

[34]  Zonghua Zhang,et al.  Analysis of energy absorption characteristics of cylindrical multi-cell columns , 2013 .

[35]  Mohammad Tahaye Abadi,et al.  Axial crushing analysis of end-capped circular tubes , 2011 .

[36]  J. G. Tom,et al.  A study on an axial crush configuration response of thin-wall, steel box components: The quasi-static experiments , 2006 .

[37]  Shiwei Zhou,et al.  Crashworthiness design for functionally graded foam-filled thin-walled structures , 2010 .

[38]  Han Zhao,et al.  On the strength enhancement under impact loading of square tubes made from rate insensitive metals , 2004 .

[39]  Alexander Meyer,et al.  Increasing of the drawing depth using tailor rolled blanks—Numerical and experimental analysis , 2008 .

[40]  H. Zarei,et al.  Crashworthiness optimization of empty and filled aluminum crash boxes , 2007 .

[41]  Marina Franulović,et al.  Genetic algorithm in material model parameters’ identification for low-cycle fatigue , 2009 .

[42]  Qing Li,et al.  A two-stage multi-fidelity optimization procedure for honeycomb-type cellular materials , 2010 .

[43]  Ping Zhu,et al.  Metamodel-based lightweight design of B-pillar with TWB structure via support vector regression , 2010 .

[44]  Kwon-Hee Lee,et al.  Automotive door design with the ULSAB concept. using structural optimization , 2002 .

[45]  Yong Xia,et al.  On the fracture possibility of thin-walled tubes under axial crushing , 2012 .

[46]  Yan Chen,et al.  Axial crushing of thin-walled structures with origami patterns , 2012 .

[47]  T. Wierzbicki,et al.  On the Crushing Mechanics of Thin-Walled Structures , 1983 .

[48]  K. Kalaivani,et al.  Foil Optimization in Tailor Welded Blank of an Automotive Floor Component , 2012 .

[49]  Jeom Kee Paik,et al.  On quasi-static crushing of thin-walled steel structures in cold temperature: Experimental and numerical studies , 2011 .

[50]  Yan Fu,et al.  Application of Tailor Rolled Blank in Vehicle Front End for Frontal Impact , 2007 .

[51]  M. Khaleel,et al.  Forming-limit diagrams of aluminum tailor-welded blank weld material , 2001 .

[52]  Qing Li,et al.  Crashworthiness design of multi-component tailor-welded blank (TWB) structures , 2013 .