Transient Thermomechanical Analysis of Sliding Electrical Contacts of Elastoplastic Bodies, Thermal Softening, and Melting Inception

Sliding electrical contacts are found in many electromechanical devices, such as relays, switches, and resistance spot welding. Temperature rise due to sliding friction and electrical current may be the major source of sliding electrical contact deterioration. This paper reports the development of a three-dimensional thermo-elasto-plastic contact model of counterformal bodies, which takes into account transient heat flux, temperature-dependent strain hardening behavior, and a realistic heat partition between surfaces. Transient contact simulations induce a significant increase in computational burden. The discrete convolution and fast Fourier transform and the conjugate gradient method are utilized to improve the computation efficiency. The present model is used to study the case of a half-space sliding over a stationary sphere, and both are made of 7075 aluminum alloy; the contact resistance is considered mainly due to the surface oxide film. The simulation results indicate that the transient contact model is able to capture the history of plastic deformation accumulation and the material melting inception.

[1]  Qian Wang,et al.  A Three-Dimensional Thermal-Mechanical Asperity Contact Model for Two Nominally Flat Surfaces in Contact , 2001 .

[2]  Q. Jane Wang,et al.  Simulation of steady and unsteady state surface temperatures under sliding imperfect electrical contact between rough surfaces , 2006 .

[3]  Kyriakos Komvopoulos,et al.  Three-Dimensional Finite Element Analysis of Elastic-Plastic Layered Media Under Thermomechanical Surface Loading , 2003 .

[4]  Shoko Yoshikawa,et al.  Resistivities of conductive composites , 1992 .

[5]  Izhak Etsion,et al.  A Semi-Analytical Solution for the Sliding Inception of a Spherical Contact , 2003 .

[6]  George T. Hahn,et al.  Elasto-Plastic Coupled Temperature-Displacement Finite Element Analysis of Two-Dimensional Rolling-Sliding Contact With a Translating Heat Source , 1991 .

[7]  Thomas Farris,et al.  Spectral Analysis of Two-Dimensional Contact Problems , 1996 .

[8]  Itzhak Green,et al.  Modeling of the Rolling and Sliding Contact Between Two Asperities , 2007 .

[9]  R. Hill.  The mathematical theory of plasticity , 1950 .

[10]  L. Keer,et al.  An extension of the Hertz theory for three-dimensional coated bodies , 2005 .

[11]  Toshio Mura,et al.  The Elastic Field in a Half Space Due to Ellipsoidal Inclusions With Uniform Dilatational Eigenstrains , 1979 .

[12]  X. Ai,et al.  An FFT-based transient flash temperature model for general three-dimensional rough surface contacts , 2000 .

[13]  I. Dietrich.  Messung des Widerstandes dünner isolierender Schichten zwischen Goldkontakten im Bereich des Tunneleffektes , 1952 .

[14]  F. X. Bostick,et al.  A three-dimensional finite element model for thermal effect of imperfect electric contacts , 1999 .

[15]  Q. Wang,et al.  A versatile method of discrete convolution and FFT (DC-FFT) for contact analyses , 2000 .

[16]  Wei Chen,et al.  Thermomechanical Analysis of Elastoplastic Bodies in a Sliding Spherical Contact and the Effects of Sliding Speed, Heat Partition, and Thermal Softening , 2008 .

[17]  J. Simmons.  Generalized Formula for the Electric Tunnel Effect between Similar Electrodes Separated by a Thin Insulating Film , 1963 .

[18]  Kyriakos Komvopoulos,et al.  Electrical contact resistance theory for conductive rough surfaces separated by a thin insulating film , 2004 .

[19]  Daniel Nelias,et al.  Contact Analyses for Bodies With Frictional Heating and Plastic Behavior , 2005 .

[20]  Chi Feng Lin,et al.  The strain rate and temperature dependence of the dynamic impact properties of 7075 aluminum alloy , 2000 .

[21]  Shuangbiao Liu,et al.  Transient Thermoelastic Stress Fields in a Half-Space , 2003 .

[22]  Q. Wang,et al.  Studying Contact Stress Fields Caused by Surface Tractions With a Discrete Convolution and Fast Fourier Transform Algorithm , 2001 .

[23]  A. Love.  The Stress Produced in a Semi-Infinite Solid by Pressure on Part of the Boundary , 1929 .

[24]  Leon M Keer,et al.  Three-Dimensional Repeated Elasto-Plastic Point Contacts, Rolling, and Sliding , 2008 .

[25]  Y. P. Chiu,et al.  On the Stress Field and Surface Deformation in a Half Space With a Cuboidal Zone in Which Initial Strains Are Uniform , 1978 .

[26]  R. Holm.  Electric contacts; theory and application , 1967 .

[27]  Daniel Nelias,et al.  Development of a Three-Dimensional Semi-Analytical Elastic-Plastic Contact Code , 2002 .

[28]  Surface normal thermoelastic displacement in moving rough contacts , 2003 .

[29]  J. Greenwood.  Constriction resistance and the real area of contact , 1966 .

[30]  Daniel Nelias,et al.  Elastic-Plastic Contact Between Rough Surfaces: Proposal for a Wear or Running-In Model , 2006 .

[31]  Jen Fin Lin,et al.  Thermal Analysis of the Transient Temperatures Arising at the Contact Spots of Two Sliding Surfaces , 2005 .

[32]  K. Johnson.  Contact Mechanics: Frontmatter , 1985 .

[33]  Daniel Nelias,et al.  A Three-Dimensional Semianalytical Model for Elastic-Plastic Sliding Contacts , 2007 .

[34]  J. C. Jaeger,et al.  Conduction of Heat in Solids , 1952 .

[35]  Geng Liu,et al.  A Thermoelastic Asperity Contact Model Considering Steady-State Heat Transfer , 1999 .

[36]  Wei Chen,et al.  Tribological modeling: Application of fast Fourier transform , 2007 .

[37]  Qian Wang,et al.  A three-dimensional thermomechanical model of contact between non-conforming rough surfaces , 2001 .

[38]  George W. Woodruff,et al.  A Transient Dynamic Analysis of Mechanical Seals Including Asperity Contact and Face Deformation , 2005 .

[39]  G. T. Hahn,et al.  Elasto-plastic finite-element analysis of 2-D rolling-plus-sliding contact with temperature-dependent bearing steel material properties , 1993 .

[40]  L. Keer,et al.  A numerical method for solving rough contact problems based on the multi-level multi-summation and conjugate gradient techniques , 1999 .