Many studies on driver speed behavior are found in the scientific literature today, and various researchers have addressed roadway alignment consistency for travel safety in context with current operating speeds. Experimental analysis was conducted on low-volume roads in Southern Italy without spiral transition curves between geometric tangent and circular elements on the horizontal alignment. All selected highways are located in areas with level terrain and vertical grades less than six percent. This study will illustrate a methodology, widely employed in the literature, to evaluate at each circular curve transition segment length, the applicable deceleration and acceleration rates. These results were then used to develop four equations for speed prediction models on tangents and curves. These regression equations were developed using a traditional ordinary least-squares method involving speed values not surveyed in transition zones. The goal of this research study is to plot continuous speed profiles to illustrate complete driver speed behavior on two-lane rural roads and to individualize critical roadway sections to improve driver safety.
[1]
Kay Fitzpatrick,et al.
Speed-Profile Model for Two-Lane Rural Highways
,
2000
.
[2]
Said M. Easa,et al.
State of the Art of Highway Geometric Design Consistency
,
1999
.
[3]
Alfredas Laurinavičius,et al.
Analysis and Evaluation of the Efficiency of Road Safety Measures Applied to Lithuanian Roads
,
2007
.
[4]
Juris Smirnovs,et al.
Evaluation of Road Traffic Safety Level in the State Main Road Network of Latvia
,
2009
.
[5]
Abishai Polus,et al.
Predicting Operating Speeds on Tangent Sections of Two-Lane Rural Highways
,
2000
.
[6]
Ivica Stančerić,et al.
Methods for Setting Road Vehicle Movement Trajectories
,
2008
.
[7]
R. Krammes,et al.
Speed-Profile Model for a Design-Consistency Evaluation Procedure in the United States
,
2000
.