Interface analysis of inorganic films on polyimide with atomic oxygen exposure

[1]  P. Chu,et al.  Mechanical and optical characteristics of multilayer inorganic films on polyimide for anti-atomic-oxygen erosion , 2012 .

[2]  M. Zhan,et al.  Atomic oxygen resistant phosphorus-containing polyimides for LEO environment , 2012, Journal of Materials Science.

[3]  M. Zhan,et al.  Atomic oxygen erosion resistance of titania–polyimide hybrid films derived from titanium tetrabutoxide and polyamic acid , 2012 .

[4]  P. Chu,et al.  An undercutting model of atomic oxygen for multilayer silica/alumina films fabricated by plasma immersion implantation and deposition on polyimide , 2011 .

[5]  Hojjat Seyedjamali,et al.  Synthesis and morphology of new functional polyimide/titania nano hybrid materials , 2011, Journal of Materials Science.

[6]  A. C. Habert,et al.  Synthesis of polyetherimide/silica hybrid membranes by the sol–gel process: influence of the reaction conditions on the membrane properties , 2011, Journal of Materials Science.

[7]  J. M. Kim,et al.  Design and fabrication of compositionally graded inorganic oxide thin films: Mechanical, optical and permeation characteristics , 2010 .

[8]  M. Zhan,et al.  Atomic oxygen erosion resistance of polyimide/ZrO2 hybrid films , 2010 .

[9]  Chun-Gon Kim,et al.  Surface molecular degradation of 3D glass polymer composite under low earth orbit simulated space environment , 2010 .

[10]  Takashi Nakamura,et al.  Investigation of degradation mechanisms in mechanical properties of polyimide films exposed to a low earth orbit environment , 2010 .

[11]  M. Budhos.  Govind , 2009 .

[12]  S. Kwak,et al.  Gas barrier film with a compositional gradient interface prepared by plasma modification of an organic/inorganic hybrid sol-gel coat. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[13]  N. Eliaz,et al.  Erosion of POSS-polyimide films under hypervelocity impact and atomic oxygen : The role of mechanical properties at elevated temperatures , 2009 .

[14]  Hsu-Tung Lu,et al.  Characteristics and properties of polyimide/vanadium oxide hybrid membranes , 2008 .

[15]  W. Nie,et al.  Preparation and characterization of polyimide/Al2O3 hybrid films by sol–gel process , 2008 .

[16]  Sigurd Wagner,et al.  A single-layer permeation barrier for organic light-emitting displays , 2008 .

[17]  P. Chu,et al.  A ground-based radio frequency inductively coupled plasma apparatus for atomic oxygen simulation in low Earth orbit. , 2007, The Review of scientific instruments.

[18]  P. Chu,et al.  Optical and mechanical properties of alumina films fabricated on Kapton polymer by plasma immersion ion implantation and deposition using different biases , 2007 .

[19]  Govind,et al.  Electro-optical response of tungsten oxide thin film nanostructures processed by a template-assisted electrodeposition route , 2007 .

[20]  Jinggang Lu,et al.  Synthesis and fine patterning of organic-inorganic composite SiO2-Al2O3 thick films , 2007 .

[21]  I. H. Tan,et al.  Magnesium implantation by plasma immersion in polymers for oxidation protection in low earth orbit environment , 2007 .

[22]  P. Evans,et al.  Toughness and adhesion of atomic layer deposited alumina films on polycarbonate substrates , 2007 .

[23]  Yuefei Zhang,et al.  Preparation of Cr hard coatings by ion beam assisted electron beam vapor deposition on Ni and Cu substrates , 2007 .

[24]  Eitan Grossman,et al.  Residual stress effect on degradation of polyimide under simulated hypervelocity space debris and atomic oxygen , 2007 .

[25]  Steven M. George,et al.  Ca test of Al2O3 gas diffusion barriers grown by atomic layer deposition on polymers , 2006 .

[26]  Yen-Ming Chen,et al.  Effect of oxygen pressure on the microstructure and properties of the Al2O3-SiO2 thin films deposited by E-beam evaporation , 2006 .

[27]  Yanchun Han,et al.  Optical intensity gradient by colloidal photonic crystals with a graded thickness distribution. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[28]  Zhimao Yang,et al.  The effect of SiO2 and Al2O3 coating on the surface of TiH2 powders on gas release. , 2005, Journal of colloid and interface science.

[29]  Akira Ohtomo,et al.  Atomic-scale imaging of nanoengineered oxygen vacancy profiles in SrTiO3 , 2004, Nature.

[30]  Y. Cohen,et al.  Simulated Low Earth Orbit Environment Interaction with Different Types of Polyethylene , 2004 .

[31]  W. Whang,et al.  Physical and mechanical properties of polyimide/titania hybrid films , 2004 .

[32]  Yong‐Duck Chung,et al.  Adhesion and interface chemical reactions of Cu/polyimide and Cu/TiN by XPS , 2003 .

[33]  Jinrong Yang,et al.  Study on polyimide/TiO2 nanocomposite membranes for gas separation , 2002 .

[34]  P. Jonnard,et al.  Adhesion properties of aluminium-metallized/ammonia plasma-treated polypropylene: Spectroscopic analysis (XPS, EXES) of the aluminium/polypropylene interface , 2002 .

[35]  P. Schuler,et al.  Atomic Oxygen Resistant Films for Multi-Layer Insulation , 2000 .

[36]  G. Baud,et al.  X-ray photoelectron spectroscopy studies of plasma-modified PET surface and alumina/PET interface , 1997 .

[37]  D. Massiot,et al.  Evolution of the Si environment in mullite solid solution by 29Si MAS-NMR spectroscopy , 1996 .

[38]  M. Ishida,et al.  A new etching method for single-crystal Al2O3 film on Si using Si ion implantation , 1996 .

[39]  M. Nogami.  Section 3. Sol-gel processing and chemical processing of glassSol-gel preparation of SiO2 glasses co , 1994 .

[40]  J. M. Martín,et al.  Chemistry of the interface between aluminium and polyethyleneterephthalate by XPS , 1991 .

[41]  L. P. Buchwalter.  Adhesion of polyimides to metal and ceramic surfaces: an overview , 1990 .

[42]  T. Wydeven,et al.  Reactions of atomic oxygen (O/3P/) with various polymer films , 1988 .