An adsorptive solar ice-maker dynamic simulation for north Mediterranean climate

Abstract This paper presents a model for dynamic simulation of an adsorptive ice-maker. The model describes the different phases of the thermodynamic cycle of the ice-maker components: solar collector, adsorbent bed, condenser and cold chamber (evaporator and water to be frozen). The adsorbent/adsorbate working pair is active carbon/methanol. The simulations were performed for a whole year using measured climatic data of Messina (38°12′N). The detailed results of a week of June and December 2005 are shown, as representative of typical summer and winter conditions. These simulations showed that the ice-maker is able to freeze 5 kg of water during all days of June, and, if the weather conditions are not too unfavourable, also during December. Further simulations, carried out for the whole year 2005, demonstrated that during the most part of the year (from April to October) a daily ice production (DIP) of 5 kg can be obtained, and an equivalent daily ice production (DIP eq ) near to 5.5 kg can be reached. During the months of February and March the average monthly DIP is about 4 kg. Finally, for the coldest months (January, November and December) the DIP was 2.0–3.5 kg. The average monthly solar coefficient of performance (COPs) varies from a minimum of about 0.045 (July) to a maximum of 0.11 (January), with an annual mean of 0.07.

[1]  E. Hu.  Simulated results of a non-valve, daily-cycled, solar-powered carbon/methanol refrigerator with a tubular solar collector , 1996 .

[2]  E. E. Anyanwu,et al.  Design, construction and test run of a solid adsorption solar refrigerator using activated carbon/methanol, as adsorbent/adsorbate pair , 2003 .

[3]  K. Sumathy,et al.  A solar-powered ice-maker with the solid adsorption pair of activated carbon and methanol , 1999 .

[4]  Ruzhu Wang,et al.  Literature review on solar adsorption technologies for ice-making and air-conditioning purposes and recent developments in solar technology , 2001 .

[5]  J. P. Hartnett,et al.  Handbook of heat transfer applications (2nd edition) , 1985 .

[6]  W. Rohsenow,et al.  Handbook of heat transfer applications , 1985 .

[7]  Ruzhu Wang,et al.  Experimental study on dynamic performance analysis of a flat-plate solar solid-adsorption refrigeration for ice maker , 2002 .

[8]  Giovanni Restuccia,et al.  Reversible adsorption heat pump: a thermodynamic model , 1995 .

[9]  Li Zhongfu,et al.  Experiments with solar-powered adsorption ice-maker , 1999 .

[10]  Emmanuel E. Anyanwu,et al.  Simulation of a solid adsorption solar refrigerator using activated carbon/methanol adsorbent/refrigerant pair , 2001 .

[11]  Alan C. Hindmarsh,et al.  Description and use of LSODE, the Livermore Solver for Ordinary Differential Equations , 1993 .

[12]  R. Germundsson,et al.  Mathematica Version 4 , 2000 .

[13]  K. Sumathy,et al.  Heat and mass transfer in the adsorbent of a solar adsorption cooling system with glass tube insulation , 2003 .

[14]  J. J. Guilleminot,et al.  Adsorptive solar powered ice maker: experiments and model , 2000 .

[15]  Michel Daguenet,et al.  Performance of a new solid adsorption ice maker with solar energy regeneration , 2000 .

[16]  R. E. Critoph.  Performance limitations of adsorption cycles for solar cooling , 1988 .

[17]  Catherine Hildbrand,et al.  A new solar powered adsorption refrigerator with high performance , 2004 .

[19]  Ruzhu Wang,et al.  Year round test of a solar adsorption ice maker in Kunming, China , 2005 .

[20]  F. Meunier,et al.  Simulation of an intermittent adsorptive solar cooling system , 1989 .

[21]  Ruzhu Wang,et al.  Heat and mass transfer in a flat plate solar solid adsorption refrigeration ice maker , 2003 .