Nonlinear dynamics of an electrically actuated imperfect microbeam resonator: experimental investigation and reduced-order modeling

We present a study of the dynamic behavior of a microelectromechanical systems (MEMS) device consisting of an imperfect clamped–clamped microbeam subjected to electrostatic and electrodynamic actuation. Our objective is to develop a theoretical analysis, which is able to describe and predict all the main relevant aspects of the experimental response. Extensive experimental investigation is conducted, where the main imperfections coming from microfabrication are detected, the first four experimental natural frequencies are identified and the nonlinear dynamics are explored at increasing values of electrodynamic excitation, in a neighborhood of the first symmetric resonance. Several backward and forward frequency sweeps are acquired. The nonlinear behavior is highlighted, which includes ranges of multistability, where the nonresonant and the resonant branch coexist, and intervals where superharmonic resonances are clearly visible. Numerical simulations are performed. Initially, two single mode reduced-order models are considered. One is generated via the Galerkin technique, and the other one via the combined use of the Ritz method and the Pade approximation. Both of them are able to provide a satisfactory agreement with the experimental data. This occurs not only at low values of electrodynamic excitation, but also at higher ones. Their computational efficiency is discussed in detail, since this is an essential aspect for systematic local and global simulations. Finally, the theoretical analysis is further improved and a two-degree-of-freedom reduced-order model is developed, which is also capable of capturing the measured second symmetric superharmonic resonance. Despite the apparent simplicity, it is shown that all the proposed reduced-order models are able to describe the experimental complex nonlinear dynamics of the device accurately and properly, which validates the proposed theoretical approach.

[1]  Sébastien Baguet,et al.  Computational and quasi-analytical models for non-linear vibrations of resonant MEMS and NEMS sensors , 2011 .

[2]  C. Hsu,et al.  Mechanical stability and adhesion of microstructures under capillary forces. I. Basic theory , 1993 .

[3]  Sergio Preidikman,et al.  A semi-analytical tool based on geometric nonlinearities for microresonator design , 2006 .

[4]  D. Elata,et al.  Experimental Validation of Electromechanical Buckling , 2006, Journal of Microelectromechanical Systems.

[5]  Fadi M. Alsaleem,et al.  On the nonlinear resonances and dynamic pull-in of electrostatically actuated resonators , 2009 .

[6]  Piero Villaggio,et al.  Mathematical Models for Elastic Structures , 1997 .

[7]  Slava Krylov,et al.  Bistability of curved microbeams actuated by fringing electrostatic fields , 2011 .

[8]  Harold G. Craighead,et al.  The pull-in behavior of electrostatically actuated bistable microstructures , 2008 .

[9]  C. Hsu,et al.  Mechanical stability and adhesion of microstructures under capillary forces. II. Experiments , 1993 .

[10]  Mohammad I. Younis,et al.  An Efficient Reduced-Order Model to Investigate the Behavior of an Imperfect Microbeam Under Axial Load and Electric Excitation , 2013 .

[11]  Ali H. Nayfeh,et al.  A reduced-order model for electrically actuated microbeam-based MEMS , 2003 .

[12]  ALI H. NAYFEH,et al.  Reduced-Order Models for MEMS Applications , 2005 .

[13]  Mohammad I. Younis,et al.  Dynamical Integrity for Interpreting Experimental Data and Ensuring Safety in Electrostatic MEMS , 2013 .

[14]  Alois Steindl,et al.  Methods for dimension reduction and their application in nonlinear dynamics , 2001 .

[15]  C. Brezinski,et al.  Extrapolation methods , 1992 .

[16]  Mohammad I. Younis,et al.  Nonlinear Dynamics of Electrically Actuated Carbon Nanotube Resonators , 2010 .

[17]  Lior Medina,et al.  Symmetry breaking in an initially curved micro beam loaded by a distributed electrostatic force , 2012 .

[18]  M. Porfiri,et al.  Review of modeling electrostatically actuated microelectromechanical systems , 2007 .

[19]  Mohammad I. Younis,et al.  Modeling and simulations of collapse instabilities of microbeams due to capillary forces , 2009 .

[20]  Mohammad I. Younis,et al.  An electrically actuated imperfect microbeam: Dynamical integrity for interpreting and predicting the device response , 2013 .

[21]  M. Younis,et al.  An Experimental and Theoretical Investigation of Dynamic Pull-In in MEMS Resonators Actuated Electrostatically , 2010, Journal of Microelectromechanical Systems.

[22]  Steven W. Shaw,et al.  Institute of Physics Publishing Journal of Micromechanics and Microengineering the Nonlinear Response of Resonant Microbeam Systems with Purely-parametric Electrostatic Actuation , 2022 .

[23]  David Elata,et al.  Analysis of a novel method for measuring residual stress in micro-systems , 2005 .

[24]  Sebastien Hentz,et al.  Bifurcation topology tuning of a mixed behavior in nonlinear micromechanical resonators , 2009 .

[25]  J. Reddy.  Energy and variational methods in applied mechanics : with an introduction to the finite element method , 1984 .

[26]  Henk Nijmeijer,et al.  Modelling the dynamics of a MEMS resonator : simulations and experiments , 2008 .

[27]  Mohammad I. Younis,et al.  An Imperfect Microbeam Electrically Actuated: Experimental Investigation and Parameter Identification , 2012 .

[28]  Claude Brezinski,et al.  Extrapolation methods - theory and practice , 1993, Studies in computational mathematics.

[29]  S. D. Senturia,et al.  Generating efficient dynamical models for microelectromechanical systems from a few finite-element simulation runs , 1999 .

[30]  Weileun Fang,et al.  Post buckling of micromachined beams , 1994 .

[31]  Weili Cui,et al.  Nonlinear Dynamics of MEMS Arches Under Harmonic Electrostatic Actuation , 2010, Journal of Microelectromechanical Systems.

[32]  Hans Troger,et al.  Dimension Reduction of Dynamical Systems: Methods, Models, Applications , 2005 .