Optically transparent superhydrophobic silica-based films

Abstract Optically transparent superhydrophobic silica-based films were obtained by means of sol–gel processing and self-assembly (SA). Desired surface roughness was obtained by tuning the microstructures of the sol–gels through careful control of hydrolysis and condensation reactions of various silica precursors during sol–gel processing, whereas modification of surface chemistry was done by introducing a monolayer through surface condensation reaction. Such coatings were obtained by dip-coating the silica sols directly onto substrates, followed with self-assembly. The resultant silica-based coatings showed optical transparency higher than 90%, and the reflection lower than 10%, and the best advancing and receding water contact angles were found to be of approximately 165°/115°. Such coatings can have applications where anti-reflection, optical transparency and superhydrophobicity are required, in addition to low temperature processing. In addition, such films can be made at room temperature involving no expensive equipment or tedious processing, and be readily coated on various substrates.

[1]  Younan Xia,et al.  Surface patterning and its application in wetting/dewetting studies , 2001 .

[2]  Akira Fujishima,et al.  Transparent Superhydrophobic Thin Films with Self-Cleaning Properties , 2000 .

[3]  A. Fujishima,et al.  Effects of the Surface Roughness on Sliding Angles of Water Droplets on Superhydrophobic Surfaces , 2000 .

[4]  A. Adamson.  Physical chemistry of surfaces , 1960 .

[5]  Mehmet Sarikaya,et al.  Nanoindentation and adhesion of sol-gel-derived hard coatings on polyester , 2000 .

[6]  G. Cao,et al.  Synthesis of Highly Porous Organic/Inorganic Hybrids by Ambient Pressure Sol-Gel Processing , 1998 .

[7]  K. Tadanaga,et al.  Super-water-repellent AlO coating films with high transparency , 2005 .

[8]  S. Basu,et al.  Mechanisms for contact angle hysteresis and advancing contact angles , 1999 .

[9]  G. Cao,et al.  Sol‐Gel‐Derived Mesoporous Silica Films with Low Dielectric Constants , 2000 .

[10]  Wetting, spreading and adhesion , 1979 .

[11]  W. Zisman,et al.  Properties of Films of Adsorbed Fluorinated Acids , 1954 .

[12]  Daniel Y. Kwok,et al.  Contact angle measurement and contact angle interpretation , 1999 .

[13]  Akira Fujishima,et al.  Preparation of Transparent Superhydrophobic Boehmite and Silica Films by Sublimation of Aluminum Acetylacetonate , 1999 .

[14]  Tan Pham,et al.  Preparation and Characterization of Gold Nanoshells Coated with Self-Assembled Monolayers , 2002 .

[15]  R. F. Brady.  Coming to an unsticky end , 1994, Nature.

[16]  H. Erbil,et al.  Transformation of a Simple Plastic into a Superhydrophobic Surface , 2003, Science.

[17]  Kazufumi Ogawa,et al.  Development of a Transparent and Ultrahydrophobic Glass Plate , 1993 .

[18]  R. N. Wenzel.  RESISTANCE OF SOLID SURFACES TO WETTING BY WATER , 1936 .

[19]  W. C. Purdy,et al.  Fabrication of carboxylic acid-terminated thin films using poly(ethyleneimine) on a gold surface , 1997 .

[20]  O. Takai,et al.  Preparation of ultra water-repellent films by microwave plasma-enhanced CVD , 1997 .

[21]  K. Tadanaga,et al.  Formation Process of Super‐Water‐Repellent Al2O3 Coating Films with High Transparency by the Sol–Gel Method , 2005 .

[22]  Jaroslaw Drelich,et al.  Effect of roughness as determined by atomic force microscopy on the wetting properties of PTFE thin films , 1996 .

[23]  Remo Guidieri.  Res , 1995, RES: Anthropology and Aesthetics.

[24]  S. Ponrathnam,et al.  Polyethyleneimine in immobilization of biocatalysts. , 1991, Enzyme and microbial technology.

[25]  Tomohiro Onda,et al.  Super-Water-Repellent Fractal Surfaces , 1995 .

[26]  K. Tadanaga,et al.  Superhydrophobic−Superhydrophilic Micropatterning on Flowerlike Alumina Coating Film by the Sol−Gel Method , 2000 .

[27]  Wei Chen,et al.  Ultrahydrophobic and Ultralyophobic Surfaces: Some Comments and Examples , 1999 .