Towards adoption of building energy simulation and optimization for passive building design: A survey and a review

Abstract Integrating optimization algorithms into simulation-based design processes is a promising approach for achieving energy efficient buildings. Building Energy Simulation and Optimization (BESO) is an emerging innovative technique that shows promise but is not yet a widely adopted design practice. To identify the needs, benefits, and hindrances of applying BESO to sustainable building design, particularly passive design, a two-part survey was conducted. A significant amount of attention was dedicated to analyzing the opinions of early adopters. Out of nine potential hindrances of the BESO technique, long calculation time, lack of adequate advertisement, and lack of a standard method or procedure are in the top three. Based on the survey results, a review was conducted to categorize a general procedure for the BESO technique. The application of the BESO technique to passive building design was investigated. The passive design components covered building forms, opaque envelopes, fenestrations, shadings, natural ventilation, and thermal mass materials. The review concludes that the three-phase optimization method was the most widely used method. Currently, compared to other passive design methods, BESO proved to be a more efficient method for helping designers (especially architects) explore various design territories.

[1]  Iñaki Navarro,et al.  Passive design strategies and performance of Net Energy Plus Houses , 2014 .

[2]  Frédéric Kuznik,et al.  Phase change material wall optimization for heating using metamodeling , 2015 .

[3]  Raffaele Bornatico,et al.  Optimal sizing of a solar thermal building installation using particle swarm optimization , 2012 .

[4]  Barbara Cutler,et al.  An intuitive daylighting performance analysis and optimization approach , 2008 .

[5]  Romain Bourdais,et al.  From hybrid model predictive control to logical control for shading system: A support vector machine approach , 2014 .

[6]  Stuart C Burgess,et al.  A case study exploring regulated energy use in domestic buildings using design-of-experiments and multi-objective optimisation , 2012 .

[7]  Goran Vučković,et al.  Greenhouse gases emission assessment in residential sector through buildings simulations and operation optimization , 2015 .

[8]  M. Fesanghary,et al.  Design of low-emission and energy-efficient residential buildings using a multi-objective optimization algorithm , 2012 .

[9]  Enrico Fabrizio,et al.  A simulation-based optimization method for cost-optimal analysis of nearly Zero Energy Buildings , 2014 .

[10]  Xing Shi.  Design optimization of insulation usage and space conditioning load using energy simulation and gene , 2011 .

[11]  Daniel E. Fisher,et al.  EnergyPlus: creating a new-generation building energy simulation program , 2001 .

[12]  Salvatore Carlucci,et al.  Assessing gaps and needs for integrating building performance optimization tools in net zero energy buildings design , 2013 .

[13]  Wei Tian,et al.  A review of sensitivity analysis methods in building energy analysis , 2013 .

[14]  Philippe Rigo,et al.  A review on simulation-based optimization methods applied to building performance analysis , 2014 .

[15]  Marilyne Andersen,et al.  A generative facade design method based on daylighting performance goals , 2012 .

[16]  Jan Hensen,et al.  Considerations on design optimization criteria for windows providing low energy consumption and high visual comfort , 2012 .

[17]  Bernard Souyri,et al.  ENSURING DESIRED NATURAL VENTILATION RATE BY MEANS OF OPTIMIZED OPENINGS , 2009 .

[18]  Vojislav Novakovic,et al.  Optimization of energy consumption in buildings with hydronic heating systems considering thermal comfort by use of computer-based tools , 2007 .

[19]  Anh Tuan Nguyen,et al.  A performance comparison of multi-objective optimization algorithms for solving nearly-zero-energy-building design problems , 2016 .

[20]  Toke Rammer Nielsen,et al.  Building energy optimization in the early design stages: A simplified method , 2015 .

[21]  Aris Tsangrassoulis,et al.  Algorithms for optimization of building design: A review , 2014 .

[22]  Moncef Krarti,et al.  Building shape optimization using neural network and genetic algorithm approach , 2006 .

[23]  Khaled Nassar,et al.  Genetic algorithms for ceiling form optimization in response to daylight levels , 2011 .

[24]  Xing Shi,et al.  A review on building energy efficient design optimization rom the perspective of architects , 2016 .

[25]  Gianluca Rapone,et al.  Optimisation of curtain wall façades for office buildings by means of PSO algorithm , 2012 .

[26]  Peter B. Luh,et al.  An integrated control of shading blinds, natural ventilation, and HVAC systems for energy saving and human comfort , 2010, 2010 IEEE International Conference on Automation Science and Engineering.

[27]  Zheng O'Neill,et al.  A methodology for meta-model based optimization in building energy models , 2012 .

[28]  Farshad Kowsary,et al.  A novel approach for the simulation-based optimization of the buildings energy consumption using NSGA-II: Case study in Iran , 2016 .

[29]  Norbert Harmathy,et al.  Multi-criterion optimization of building envelope in the function of indoor illumination quality towards overall energy performance improvement , 2016 .

[30]  A. Malkawi,et al.  Optimizing building form for energy performance based on hierarchical geometry relation , 2009 .

[31]  Marilyne Andersen,et al.  MULTI-OBJECTIVE FACADE OPTIMIZATION FOR DAYLIGHTING DESIGN USING A GENETIC ALGORITHM , 2010 .

[32]  Yi Jiang,et al.  Design optimization and field demonstration of natural ventilation for high-rise residential buildings , 2014 .

[33]  Alessandro Prada,et al.  Multi-objectives optimization of Energy Efficiency Measures in existing buildings , 2015 .

[34]  Eugénio Rodrigues,et al.  Improving thermal performance of automatically generated floor plans using a geometric variable sequential optimization procedure , 2014 .

[35]  Marco Manzan,et al.  Genetic optimization of external fixed shading devices , 2014 .

[36]  Roberta Padovan,et al.  Multi-criteria energy and daylighting optimization for an office with fixed and moveable shading devices , 2014 .

[37]  Dejan Mumovic,et al.  Implementing multi objective genetic algorithm for life cycle carbon footprint and life cycle cost minimisation: A building refurbishment case study , 2016 .

[38]  Liang Zhou,et al.  Optimization of ventilation system design and operation in office environment , 2009 .

[39]  Alistair B. Sproul,et al.  Design optimisation for a low energy home in Sydney , 2011 .

[40]  Anh Tuan Nguyen,et al.  Passive designs and strategies for low-cost housing using simulation-based optimization and different thermal comfort criteria , 2014 .

[41]  Robert F. Boehm,et al.  Passive building energy savings: A review of building envelope components , 2011 .

[42]  Ralph Evins,et al.  A review of computational optimisation methods applied to sustainable building design , 2013 .

[43]  Xavier Marsault.  A multiobjective and interactive genetic algorithm to optimize the building form in early design stages , 2013 .

[44]  Ming-Der Yang,et al.  Design optimization of office building envelope configurations for energy conservation , 2016 .

[45]  Jae-Weon Jeong,et al.  Optimization of a free-form building shape to minimize external thermal load using genetic algorithm , 2014 .

[46]  Lorenzo Pagliano,et al.  Optimization by Discomfort Minimization for Designing a Comfortable Net Zero Energy Building in the Mediterranean Climate , 2013 .

[47]  Yun Kyu Yi,et al.  Agent-based geometry optimization with Genetic Algorithm (GA) for tall apartment’s solar right , 2015 .

[48]  Jlm Jan Hensen,et al.  EXPLORING THE POTENTIAL OF CLIMATE ADAPTIVE BUILDING SHELLS , 2011 .

[49]  Giovanni Zemella,et al.  Optimised design of energy efficient building faades via Evolutionary Neural Networks , 2011 .

[50]  Fehmi Görkem Üçtuğ,et al.  A linear programming approach to household energy conservation: Efficient allocation of budget , 2012 .

[51]  M. Hamdy,et al.  A multi-stage optimization method for cost-optimal and nearly-zero-energy building solutions in line with the EPBD-recast 2010 , 2013 .

[52]  Olivier Fudym,et al.  A Kriging constrained efficient global optimization approach applied to low-energy building design problems , 2012 .

[53]  Michael Wetter,et al.  Building design optimization using a convergent pattern search algorithm with adaptive precision simulations , 2005 .

[54]  William W. Braham,et al.  An integrated energy–emergy approach to building form optimization: Use of EnergyPlus, emergy analysis and Taguchi-regression method , 2015 .

[55]  Wenjie Yang,et al.  Performance-driven architectural design and optimization technique from a perspective of architects , 2013 .

[56]  Haralambos Sarimveis,et al.  Optimization of window-openings design for thermal comfort in naturally ventilated buildings , 2012 .

[57]  Milorad Bojić,et al.  Optimization of thermal insulation to achieve energy savings in low energy house (refurbishment) , 2014 .

[58]  Xiwang Li,et al.  Multi-objective optimization for thermal mass model predictive control in small and medium size commercial buildings under summer weather conditions , 2016 .

[59]  Ala Hasan,et al.  Applying a multi-objective optimization approach for Design of low-emission cost-effective dwellings , 2011 .

[60]  Jeong Hoe Lee,et al.  Optimization of indoor climate conditioning with passive and active methods using GA and CFD , 2007 .

[61]  Adams Rackes,et al.  Using multiobjective optimizations to discover dynamic building ventilation strategies that can improve indoor air quality and reduce energy use , 2014 .

[62]  Jonathan A. Wright,et al.  Multi-objective optimization of cellular fenestration by an evolutionary algorithm , 2014 .

[63]  Shinsuke Kato,et al.  Optimum design for indoor humidity by coupling Genetic Algorithm with transient simulation based on Contribution Ratio of Indoor Humidity and Climate analysis , 2012 .

[64]  Weimin Wang,et al.  Floor shape optimization for green building design , 2006, Adv. Eng. Informatics.

[65]  Jun Xu,et al.  A systematic approach for energy efficient building design factors optimization , 2015 .

[66]  Andreas K. Athienitis,et al.  The Use of Genetic Algorithms for a net-Zero Energy Solar Home Design Optimisation Tool , 2006 .

[67]  Gordon H. Hart.  Saving energy by insulating pipe components: on steam & hot water distribution systems , 2011 .

[68]  Consolación Gil,et al.  Optimization methods applied to renewable and sustainable energy: A review , 2011 .

[69]  Panos Y. Papalambros,et al.  Analytic target cascading in simulation-based building design , 2005 .

[70]  Weimin Wang,et al.  Applying multi-objective genetic algorithms in green building design optimization , 2005 .

[71]  Sean N. Murray,et al.  Multi-variable optimization of thermal energy efficiency retrofitting of buildings using static modelling and genetic algorithms – A case study , 2014 .

[72]  Ala Hasan,et al.  Impact of adaptive thermal comfort criteria on building energy use and cooling equipment size using , 2011 .

[73]  Domenico Laforgia,et al.  Multi-objective optimization analysis for high efficiency external walls of zero energy buildings (ZEB) in the Mediterranean climate , 2014 .

[74]  Moncef Krarti,et al.  Design Optimization of Energy Efficient Office Buildings in Tunisia , 2013 .

[75]  Soolyeon Cho,et al.  DESIGN OPTIMIZATION OF SQUARE SKYLIGHTS IN OFFICE BUILDINGS , 2013 .

[76]  Luis C. Dias,et al.  Multi-objective optimization for building retrofit strategies: A model and an application , 2012 .

[77]  Moncef Krarti,et al.  Genetic-algorithm based approach to optimize building envelope design for residential buildings , 2010 .

[78]  E. Rogers.  Diffusion of Innovations , 1962 .

[79]  Ertunga C. Özelkan,et al.  Optimizing complex building design for annual daylighting performance and evaluation of optimization algorithms , 2015 .

[80]  Hoon Heo,et al.  Prediction of building energy consumption using an improved real coded genetic algorithm based least squares support vector machine approach , 2015 .

[81]  Godfried Augenbroe,et al.  Advanced Building Simulation , 2004 .

[82]  J. Kämpf,et al.  A comparison of global optimization algorithms with standard benchmark functions and real-world applications using EnergyPlus , 2009 .

[83]  Juan J. Sendra,et al.  Daylighting design with lightscoop skylights: Towards an optimization of shape under overcast sky conditions , 2013 .

[84]  Nader Sadegh,et al.  Real-time optimization of a double-skin facade based on lumped modeling and occupant preference , 2004 .

[85]  Fariborz Haghighat,et al.  Multiobjective optimization of building design using TRNSYS simulations, genetic algorithm, and Artificial Neural Network , 2010 .

[86]  Yongjun Sun,et al.  A multi-criteria system design optimization for net zero energy buildings under uncertainties , 2015 .

[87]  Mark Luther,et al.  Energy efficient envelope design for high-rise apartments , 2005 .

[88]  Fariborz Haghighat,et al.  Optimization of ventilation systems in office environment, Part II: Results and discussions , 2009 .

[89]  Kyle Konis,et al.  Passive performance and building form: An optimization framework for early-stage design support , 2016 .

[90]  Ala Hasan,et al.  Minimisation of life cycle cost of a detached house using combined simulation and optimisation , 2008 .

[91]  Hyung-Jo Jung,et al.  Optimization of building window system in Asian regions by analyzing solar heat gain and daylighting elements , 2013 .

[92]  Mohamed Hamdy,et al.  Mobo A New Software For Multi-objective Building Performance Optimization , 2013, Building Simulation Conference Proceedings.

[93]  Jérôme Henri Kämpf,et al.  Optimisation of building form for solar energy utilisation using constrained evolutionary algorithms , 2010 .

[94]  Daisuke Sumiyoshi,et al.  Optimization of passive design measures for residential buildings in different Chinese areas , 2012 .

[95]  Christina J. Hopfe,et al.  Uncertainty and sensitivity analysis in building performance simulation for decision support and design optimization , 2009 .

[96]  Moncef Krarti,et al.  Comparative evaluation of optimal energy efficiency designs for French and US office buildings , 2015 .

[97]  Rudi Stouffs,et al.  Design explorations of performance driven geometry in architectural design using parametric modeling and genetic algorithms , 2011, Adv. Eng. Informatics.

[98]  Hossein Omrany,et al.  Optimization of Building Energy Performance through Passive Design Strategies , 2016 .