Comparative Analysis over Tribology Characterization of TiAlN and TiAlSiN PVD Coating on Plasma Nitride Alloy 20

[1]  R. Selvabharathi,et al.  Influence of optimization techniques and nano surface coating materials on microstructure of iron-nickel-chromium alloy using wire EDM process , 2021, Materials Science-Poland.

[2]  M. Hafeez,et al.  Investigation on Cadmium Ions Removal from Water by a Nanomagnetite Based Biochar Derived from Eleocharis Dulcis , 2020, Journal of Inorganic and Organometallic Polymers and Materials.

[3]  B. Krishnan,et al.  Experimental Investigation of Mechanical and Wear Properties of AL7075/Al2O3/MICA Hybrid Composite , 2020, Journal of Inorganic and Organometallic Polymers and Materials.

[4]  Ankur Kumar,et al.  Relevance of Nanomaterials in Food Packaging and its Advanced Future Prospects , 2020, Journal of Inorganic and Organometallic Polymers and Materials.

[5]  Ali Taheri Najafabadi,et al.  Extraction of highly pure nickel hydroxide from spent NiO/Al2O3 catalyst: Statistical study on leaching by sulfuric acid lixiviant and selective precipitation , 2020 .

[6]  Zhi-wei Yu,et al.  Microstructure and properties of plasma nitrided layers on Ni-based superalloy Ni-20Cr , 2019, Materials Characterization.

[7]  Asmaa A. H. El-Bassuony,et al.  Influence of High Annealing Temperature on Structural, Magnetic and Antimicrobial Activity of Silver Chromite Nanoparticles for Biomedical Applications , 2019, Journal of Inorganic and Organometallic Polymers and Materials.

[8]  Mao-qiu Wang,et al.  Effect of nickel content on the processing and microstructure evolution of Co–Cr–Mo–Ni alloys , 2019, Materials Science and Engineering: A.

[9]  R. Karuppasamy,et al.  Influence of high-velocity oxygen fuel spraying and plasma nitriding on microstructure properties of iron-nickel-chromium alloy using hybrid surface heat treatment , 2019, Materials Research Express.

[10]  Leili Tafaghodi Khajavi,et al.  Oxidative dissolution of nickel matte in dilute sulfuric acid solutions , 2019, Hydrometallurgy.

[11]  A. Mostafa,et al.  An Eco-friendly Synthesis of V2O5 Nanoparticles and Their Catalytic Activity for the Degradation of 4-Nitrophrnol , 2019, Journal of Inorganic and Organometallic Polymers and Materials.

[12]  R. Poursalehi,et al.  Effects of functionally graded TiN layer and deposition temperature on the structure and surface properties of TiCN coating deposited on plasma nitrided H13 steel by PACVD method , 2019, Journal of Alloys and Compounds.

[13]  K. Abdullin,et al.  Hydrogenation of p-Nitrobenzoic Acid by Gold and Palladium Nanoparticles Immobilized Within Macroporous Amphoteric Cryogels in Aqueous Solution , 2018, Journal of Inorganic and Organometallic Polymers and Materials.

[14]  A. Sowińska,et al.  Structure and hemocompatibility of nanocrystalline titanium nitride produced under glow-discharge conditions , 2018 .

[15]  Xiaoying Li,et al.  Response of a molybdenum alloy to plasma nitriding , 2018 .

[16]  P. Olubambi,et al.  Nanoindentation studies on TiN nanoceramic reinforced Ti–6Al–4V matrix composite , 2018 .

[17]  M. G. Burke,et al.  Corrosion fatigue and microstructural characterisation of Type 316 austenitic stainless steels tested in PWR primary water , 2018 .

[18]  A. Wisitsoraat,et al.  Wear behaviours of filtered cathodic arc deposited TiN, TiAlSiN and TiCrAlSiN coatings on AISI 316 stainless steel fishing net-weaving machine components under dry soft-sliding against nylon fibres , 2017 .

[19]  J. Slota,et al.  Evaluation of the Effect of Different Plasma-Nitriding Parameters on the Properties of Low-Alloy Steel , 2017, Journal of Materials Engineering and Performance.

[20]  C. Binder,et al.  Effects of Different Plasma Nitrided Layers on the Tribological Performance of DLC Coatings , 2016 .

[21]  Neetu Singh,et al.  Synthesis and Characterization of Nanostructured Magnesium Oxide: Insight from Solid-State Density Functional Theory Calculations , 2016, Journal of Inorganic and Organometallic Polymers and Materials.

[22]  D. Shoesmith,et al.  Materials Selection for Use in Hydrochloric Acid , 2016 .

[23]  Hui-di Zhou,et al.  High temperature tribological properties of TiAlSiN coatings produced by hybrid PVD technology , 2016 .

[24]  M. Lei,et al.  Effect of microstructure on mechanical and tribological properties of TiAlSiN nanocomposite coatings deposited by modulated pulsed power magnetron sputtering , 2015 .

[25]  D. McCulloch,et al.  Microstructural and tribological characterisation of a nitriding/TiAlN PVD coating duplex treatment applied to M2 High Speed Steel tools , 2015 .

[26]  E. Jägle,et al.  The Nature and Origin of “Double Expanded Austenite” in Ni-Based Ni-Ti Alloys Developing Upon Low Temperature Gaseous Nitriding , 2015, Metallurgical and Materials Transactions A.

[27]  M. Ghoranneviss,et al.  Synthesis of Carbon Nanotube and Zinc Oxide (CNT–ZnO) Nanocomposite , 2015, Journal of Inorganic and Organometallic Polymers and Materials.

[28]  M. Vaka,et al.  Corrosion behavior of TiN, TiAlN, TiAlSiN-coated 316L stainless steel in simulated proton exchange membrane fuel cell environment , 2014 .

[29]  H. Neumann,et al.  Analysis of in situ XRD measurements for low energy ion beam nitriding of austenitic stainless steel , 2014 .

[30]  Chunlei Jiang,et al.  Microstructure and properties of AlB2-type WB2 thin films deposited by direct-current magnetron sputtering , 2014 .

[31]  S. Saroja,et al.  Nitriding Kinetics of Inconel 600 , 2013 .

[32]  F. J. Ferrer,et al.  Microstructural and Chemical Characterization of Nanostructured TiAlSiN Coatings with Nanoscale Resolution , 2012, Microscopy and Microanalysis.

[33]  Jun Wang,et al.  Influence of time on the microstructure of AISI 321 austenitic stainless steel in salt bath nitriding , 2012 .

[34]  Lai-fei Cheng,et al.  An Investigation of Environment Barrier Coating on 2D C/SiC Composites Prepared by Liquid Phase Process , 2012, Journal of Inorganic and Organometallic Polymers and Materials.

[35]  J. Oddershede,et al.  Extended X-ray absorption fine structure investigation of nitrogen stabilized expanded austenite , 2010 .

[36]  Chengyong Wang,et al.  Microstructure and properties of TiAlSiN coatings prepared by hybrid PVD technology , 2009 .

[37]  T. Bell.  Current status of supersaturated surface engineered S phase materials , 2007 .

[38]  S. Vepřek,et al.  Avoiding the high-temperature decomposition and softening of (Al1−xTix)N coatings by the formation of stable superhard nc-(Al1−xTix)N/a-Si3N4 nanocomposite , 2004 .

[39]  S. Carvalho,et al.  Microstructure and mechanical properties of nanocomposite (Ti,Si,Al)N coatings , 2001 .

[40]  P. Cvahte,et al.  Improvement of hot-working processes with PVD coatings and duplex treatment , 2001 .

[41]  D. Shoesmith,et al.  Materials Selection for Use in Concentrated Hydrochloric Acid , 2017 .

[42]  P. Wilbur,et al.  Metastable phase formation and enhanced diffusion in f.c.c. alloys under high dose, high flux nitrogen implantation at high and low ion energies , 1994 .