Water-Cooled Direct Drive Permanent Magnet Motor Design in Consideration of its Efficiency and Structural Strength
暂无分享,去创建一个
Ji-Young Lee | Jung-Pyo Hong | D. Hong | Ji-Young Lee | Jung-Pyo Hong | Byung-Chul Woo | Do Kwan Hong | Byung Chul Woo | Kyu Seob Kim
[1] D. Hong,et al. Rotordynamics of 120 $\thinspace$000 r/min 15 kW Ultra High Speed Motor , 2009, IEEE Transactions on Magnetics.
[2] R. Wrobel,et al. Design Considerations of a Direct Drive Brushless Machine With Concentrated Windings , 2008, IEEE Transactions on Energy Conversion.
[3] Nobuyuki Matsui,et al. A design approach for direct-drive permanent magnet motors , 2005 .
[4] Do-Kwan Hong,et al. Performance Comparison of Longitudinal Flux and Transverse Flux Permanent Magnet Machines for Turret Applications With Large Diameter , 2012, IEEE Transactions on Magnetics.
[5] Analysis of Symmetric and Periodic Open Boundary Problem by Coupling of FEM and Fourier Series , 2013 .
[6] Gyu-Tak Kim,et al. The Optimal Design of Fractional-slot SPM to Reduce Cogging Torque and Vibration , 2012 .
[7] Jae-Woo Jung,et al. Temperature Estimation of IPMSM Using Thermal Equivalent Circuit , 2012, IEEE Transactions on Magnetics.
[8] Ji-Young Lee,et al. Design of an Axial Flux Permanent Magnet Generator for a Portable Hand Crank Generating System , 2012, IEEE Transactions on Magnetics.
[9] G. G. Stokes. "J." , 1890, The New Yale Book of Quotations.
[10] Aimeng Wang,et al. Comparison of Five Topologies for an Interior Permanent-Magnet Machine for a Hybrid Electric Vehicle , 2011, IEEE Transactions on Magnetics.
[11] Maarten J. Kamper,et al. Radial-Flux Permanent-Magnet Hub Drives: A Comparison Based on Stator and Rotor Topologies , 2012, IEEE Transactions on Industrial Electronics.
[12] Hee-Jun Kim,et al. Thermal Analysis of Interior Permanent-Magnet Synchronous Motor by Electromagnetic Field-Thermal Linked Analysis , 2012 .