论文信息 - Model Based Prediction Approach for Internal Machine Tool Heat Sources on the Level of Subsystems

Model Based Prediction Approach for Internal Machine Tool Heat Sources on the Level of Subsystems

Abstract Modern machine tools are highly sophisticated mechatronic systems. Each subsystem's energy efficiency is important regarding thermal effects of the machine: Losses in the subsystems are mainly heat sources, causing temperature gradients and thermal elongation. Knowledge about the internal heat sources is therefore mandatory for high precision machining, as well as for the design of compensation strategies. This paper presents a modeling approach to estimate the heat release of machine tool subsystems and predict boundary conditions for thermal models. The simulation results are verified by measurements on an internal cooling system of a lathe. Video abstract Download : Download video (2MB)

[1] Paul Xirouchakis,et al. Evaluating the use phase energy requirements of a machine tool system , 2011 .

[2] David N. Kordonowy,et al. A power assessment of machining tools , 2002 .

[3] Christian Brecher,et al. Thermal issues in machine tools , 2012 .

[4] James B. Bryan,et al. International Status of Thermal Error Research (1990) , 1990 .

[5] Konrad Wegener,et al. Energetic machine tool modeling approach for energy consumption prediction , 2012 .

[6] M. J. Moran,et al. Fundamentals of Engineering Thermodynamics , 2014 .

[7] Konrad Wegener,et al. Energy Consumption Measurement with a Multichannel Measurement System on a machine tool , 2010 .

[8] Uwe Heisel,et al. Simulation and Prediction of Process-Oriented Energy Consumption of Machine Tools , 2012 .

[9] Sascha Weikert,et al. Phenomenological compensation of thermally caused position and orientation errors of rotary axes , 2013 .

[10] Sangkee Min,et al. Development of an energy consumption monitoring procedure for machine tools , 2012 .