Air DCSBD plasma treatment of Al surface at atmospheric pressure

[1]  P. Souček,et al.  Depth profile analyses of nc-TiC/a-C:H coating prepared by balanced magnetron sputtering , 2011 .

[2]  J. Havel,et al.  Formation of aluminium, aluminium nitride and nitrogen clusters via laser ablation of nano aluminium nitride. Laser Desorption Ionisation and Matrix-Assisted Laser Desorption Ionisation Time-of-Flight Mass Spectrometry. , 2011, Rapid communications in mass spectrometry : RCM.

[3]  Eckhard Beyer,et al.  Influence on the strength and aging resistance of aluminium joints by laser pre-treatment and surface modification , 2010 .

[4]  A. Matthews,et al.  Pulse current plasma assisted electrolytic cleaning of AISI 4340 steel , 2010 .

[5]  Yuta Suzuki,et al.  Effect of gas composition on metal surface cleaning using atmospheric pressure microwave plasma , 2009 .

[6]  N. Harada,et al.  Surface cleaning of metal wire by atmospheric pressure plasma , 2009 .

[7]  M. Cernak,et al.  Diffuse Coplanar Surface Barrier Discharge and its applications for in-line processing of low-added-value materials , 2009 .

[8]  F. Velasco,et al.  Analysis of hydrolysis process of γ-methacryloxypropyltrimethoxysilane and its influence on the formation of silane coatings on 6063 aluminum alloy , 2009 .

[9]  P. Kingshott,et al.  Surface oxide formation during corona discharge treatment of AA 1050 aluminium surfaces , 2008 .

[10]  H. Uhm,et al.  Surface Treatment of Aluminum Sheets by Pulsed Microwave Plasma Discharge at Atmospheric Pressure , 2007 .

[11]  Ricardo Molina,et al.  Role of the Active Species of Plasmas Involved in the Modification of Textile Materials , 2007 .

[12]  D. Vangeneugden,et al.  Deposition of Organosilicon‐Based Anticorrosion Layers on Galvanized Steel by Atmospheric Pressure Dielectric Barrier Discharge Plasma , 2007 .

[13]  H. Uhm,et al.  Modification of metal surfaces by microwave plasma at atmospheric pressure , 2007 .

[14]  Changquan Wang,et al.  Effect of atmospheric pressure dielectric barrier discharge air plasma on electrode surface , 2006 .

[15]  C. Leygraf,et al.  In situ ATR-FTIR studies of the aluminium/polymer interface upon exposure to water and electrolyte , 2006 .

[16]  D. Korzec,et al.  Plasma cleaning of “endless” substrates by use of a tandem dielectric barrier discharge ☆ , 2005 .

[17]  L. Sorrentino,et al.  Correlation of wettability and superficial cleaning of 2024 aluminium alloy with air cold plasma treatment time , 2005 .

[18]  Tetsuya Akitsu,et al.  Plasma sterilization using glow discharge at atmospheric pressure , 2005 .

[19]  T. Yamamoto,et al.  Aluminum surface treatment using three different plasma-assisted dry chemical processes , 2004, IEEE Transactions on Industry Applications.

[20]  Chaozong Liu,et al.  Effects of DBD plasma operating parameters on the polymer surface modification , 2004 .

[21]  F. Miller,et al.  Course Notes on the Interpretation of Infrared and Raman Spectra , 2004 .

[22]  G. Yeom,et al.  Oxide surface cleaning by an atmospheric pressure plasma , 2004 .

[23]  L. Sorrentino,et al.  Improving the wettability of 2024 aluminium alloy by means of cold plasma treatment , 2003 .

[24]  Martin H. Schmidt,et al.  Study of an atmospheric pressure glow discharge (APG) for thin film deposition , 2003 .

[25]  S. Takeda,et al.  Surface OH group governing wettability of commercial glasses , 1999 .

[26]  V. Puech,et al.  Oil removal from iron surfaces by atmospheric-pressure barrier discharges , 1999 .

[27]  Satoshi Takeda,et al.  Surface OH group governing adsorption properties of metal oxide films , 1999 .

[28]  H. Li,et al.  An in situ XPS study of oxygen plasma cleaning of aluminum surfaces , 1997 .

[29]  H. Kersten,et al.  Investigations on plasma-assisted surface cleaning of aluminum contaminated with lubricants , 1996 .

[30]  J. Roth.  Industrial Plasma Engineering , 1995 .