Modeling of a solid oxide electrolysis cell for carbon dioxide electrolysis

Abstract In this study, two models are developed to investigate the performance of a solid oxide electrolysis cell (SOEC) for CO 2 electrolysis at different levels. The first model is a one-dimensional model which is basing on a previously developed electrochemical model for steam electrolysis and considered all overpotentials in the SOEC. The second model is a two-dimensional thermal-fluid model consisting of the 1D model and a computational fluid dynamics (CFD) model. It is found that the mean electrolyte temperature initially decreases with increasing operating potential, reaches the minimum at about 1.1 V and increases considerably with a further increase in potential. At the thermal-neutral voltage (1.463 V at 1173 K), the calculated mean electrolyte temperature matches the inlet gas temperature. Increasing the operating potential increases both the local current density and the electrolyte Nernst potential. The electrochemical performance can be improved by increasing the inlet gas velocity from 0.2 m s −1 to 1.0 m s −1 but further increasing the inlet gas velocity will not considerably enhance the SOEC performance. It is also found that a change of electrode permeability in the order of 10 −16  m 2 to 10 −13  m 2 does not noticeably influence the SOEC performance in the present study, due to negligible convection effect in the porous electrodes.

[1]  J. O’Brien,et al.  Progress in high-temperature electrolysis for hydrogen production using planar SOFC technology , 2005 .

[2]  Van P. Carey,et al.  The properties of gases & liquids: 4th Edition. Robert C. Reid, John M. Prausnitz, and Bruce E. Poling, McGraw-Hill Book Company, New York, NY, 1987, 741 pages, $49.50. , 1988 .

[3]  D. Jeon,et al.  A comprehensive micro-scale model for transport and reaction in intermediate temperature solid oxide fuel cells , 2006 .

[4]  Carl M. Stoots,et al.  3D CFD model of a multi-cell high-temperature electrolysis stack , 2007 .

[5]  N. Brandon,et al.  Hydrogen production through steam electrolysis: Model-based steady state performance of a cathode-supported intermediate temperature solid oxide electrolysis cell , 2007 .

[6]  K. Sridhar,et al.  Study of carbon dioxide electrolysis at electrode/electrolyte interface: Part I. Pt/YSZ interface , 2004 .

[7]  K. R. Sridhar,et al.  OXYGEN PRODUCTION ON MARS USING SOLID OXIDE ELECTROLYSIS , 1995 .

[8]  Zongqiang Mao,et al.  Composite electrolyte based on nanostructured Ce0.8Sm0.2O1.9 (SDC) for low‐temperature solid oxide fuel cells , 2009 .

[9]  M. W. Chase.  NIST-JANAF thermochemical tables , 1998 .

[10]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[11]  J. O’Brien,et al.  CFD Model Of A Planar Solid Oxide Electrolysis Cell For Hydrogen Production From Nuclear Energy , 2005 .

[12]  Chao-Yang Wang,et al.  Fundamental Models for Fuel Cell Engineering , 2004 .

[13]  W. Kiatkittipong,et al.  Operation viability and performance of solid oxide fuel cell fuelled by different feeds. , 2009 .

[14]  Krishnaswamy Nandakumar,et al.  Geometrical modeling of microstructure of solid oxide fuel cell composite electrodes , 2008 .

[15]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[16]  S. Chan,et al.  A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness , 2001 .

[17]  Khiam Aik Khor,et al.  Simulation of a composite cathode in solid oxide fuel cells , 2004 .

[18]  Chia-Jung Hsu.  Numerical Heat Transfer and Fluid Flow , 1981 .

[19]  E. Rideal,et al.  Fuel Cells , 1958, Nature.

[20]  Meng Ni,et al.  Modeling of a planar solid oxide fuel cell based on proton‐conducting electrolyte , 2010 .

[21]  Dennis Y.C. Leung,et al.  A modeling study on concentration overpotentials of a reversible solid oxide fuel cell , 2006 .

[22]  Phillip N. Hutton,et al.  A macro-level model for determining the performance characteristics of solid oxide fuel cells , 2004 .

[23]  Khiam Aik Khor,et al.  An electrolyte model for ceramic oxygen generator and solid oxide fuel cell , 2002 .

[24]  Dennis Y.C. Leung,et al.  An Electrochemical Model of a Solid Oxide Steam Electrolyzer for Hydrogen Production , 2006 .

[25]  K. Sridhar,et al.  Study of carbon dioxide electrolysis at electrode/electrolyte interface: Part II. Pt-YSZ cermet/YSZ interface , 2004 .

[26]  Nigel P. Brandon,et al.  Hydrogen production through steam electrolysis , 2012 .

[27]  S. Ebbesen,et al.  Electrolysis of carbon dioxide in Solid Oxide Electrolysis Cells , 2009 .

[28]  Eric Croiset,et al.  Performance of ethanol-fuelled solid oxide fuel cells: Proton and oxygen ion conductors , 2007 .