论文信息 - Simulation result about harmonics filtering for improving the functioning regime of the UHP EAF

Simulation result about harmonics filtering for improving the functioning regime of the UHP EAF

This paper present the results obtained by simulation for the functioning regime improvement of an UHP Electric Arc Furnace. Because the nonlinearity of the electric arc the EAF functioning regime are perturbed from three causes: the current harmonics, the reactive power and the unbalanced load. In this paper there are study the possibilities of harmonics filtering and compensate the reactive power. The study was made using the results of some measurements made on an EAF and using an electric arc model for simulation. The simulations are performed in PSCAD EMTDC simulation program, a program dedicated to the power system.

Mihaela Osaci | Caius Panoiu | Manuela Panoiu | Ionel Muscalagiu

[1] S. Kolluri,et al. Voltage flicker prediction for two simultaneously operated AC arc furnaces , 1996 .

[2] Mihaela Osaci,et al. Modeling and simulating the AC electric arc using PSCAD EMTDC , 2006 .

[3] H. E. Tacca,et al. Arc Furnace Modeling in ATP-EMTP , .

[4] Benoit Boulet,et al. Modeling and control of an electric arc furnace , 2003, Proceedings of the 2003 American Control Conference, 2003..

[5] Gian Carlo Montanari,et al. Arc-furnace model for the study of flicker compensation in electrical networks , 1994 .

[6] A. E. Emanuel,et al. Practical definitions for powers in systems with nonsinusoidal waveforms and unbalanced loads: a discussion , 1996 .