Progress and perspective of Li 1 +   x Al x Ti 2 ‐x ( PO 4 ) 3 cer

[1]  She-huang Wu,et al.  Mechanical alloy coating of LATP decorated porous carbon on LiFe1/3Mn1/3Co1/3PO4/C composite cathode for high-voltage Li-ion battery , 2020 .

[2]  Yun Zheng,et al.  A review of composite solid-state electrolytes for lithium batteries: fundamentals, key materials and advanced structures. , 2020, Chemical Society reviews.

[3]  Wei Xiao,et al.  Boosting the electrochemical performance of LiNi0.8Co0.15Al0.05O2 cathode materials in-situ modified with Li1.3Al0.3Ti1.7(PO4)3 fast ion conductor for lithium-ion batteries , 2020, Electrochimica Acta.

[4]  Li-zhen Fan,et al.  Sandwich structured NASICON-type electrolyte matched with sulfurized polyacrylonitrile cathode for high performance solid-state lithium-sulfur batteries , 2020 .

[5]  Chuanjian Zhou,et al.  Facile interfacial adhesion enabled LATP-based solid-state lithium metal battery , 2020 .

[6]  X. Tao,et al.  In Situ Construction of a LiF‐Enriched Interface for Stable All‐Solid‐State Batteries and its Origin Revealed by Cryo‐TEM , 2020, Advanced materials.

[7]  Youngsik Kim,et al.  3D Ion‐Conducting, Scalable, and Mechanically Reinforced Ceramic Film for High Voltage Solid‐State Batteries , 2020, Advanced Functional Materials.

[8]  P. He,et al.  Revealing the Impact of Space-Charge Layers on the Li-Ion Transport in All-Solid-State Batteries , 2020 .

[9]  Qinghua Zhang,et al.  An In Situ Formed Surface Coating Layer Enabling LiCoO2 with Stable 4.6 V High‐Voltage Cycle Performances , 2020, Advanced Energy Materials.

[10]  Y. Xiong,et al.  Interface engineering of Li1.3Al0.3Ti1.7(PO4)3 ceramic electrolyte via multifunctional interfacial layer for all-solid-state lithium batteries , 2020, Journal of Power Sources.

[11]  Yong Yang,et al.  Chemomechanical Failure Mechanism Study in NASICON-Type Li1.3Al0.3Ti1.7(PO4)3 Solid-State Lithium Batteries , 2020, Chemistry of Materials.

[12]  C. V. Singh,et al.  Determining the limiting factor of the electrochemical stability window for PEO-based solid polymer electrolytes: main chain or terminal –OH group? , 2020 .

[13]  T. Zhao,et al.  Enabling Solid-State Li Metal Batteries by In Situ Forming Ionogel Interlayers , 2020 .

[14]  Wei Xiao,et al.  Enhancing the cycling stability of all-solid-state lithium-ion batteries assembled with Li1.3Al0.3Ti1.7(PO4)3 solid electrolytes prepared from precursor solutions with appropriate pH values , 2020 .

[15]  B. Dunn,et al.  A general method to synthesize and sinter bulk ceramics in seconds , 2020, Science.

[16]  Yan‐Bing He,et al.  In-situ Construction of An Ultra-stable Conductive Composite Interface for High-Voltage All-Solid-State Lithium Metal Batteries. , 2020, Angewandte Chemie.

[17]  J. Nowiński,et al.  Impact of Li2.9B0.9S0.1O3.1 glass additive on the structure and electrical properties of the LATP-based ceramics , 2020, 2007.11244.

[18]  M. Armand,et al.  Self-Healing Janus Interfaces for High-Performance LAGP-Based Lithium Metal Batteries , 2020 .

[19]  Liquan Chen,et al.  Enabling Stable Cycling of 4.2 V High‐Voltage All‐Solid‐State Batteries with PEO‐Based Solid Electrolyte , 2020, Advanced Functional Materials.

[20]  Adelaide M. Nolan,et al.  The Thermal Stability of Lithium Solid Electrolytes with Metallic Lithium , 2020, Joule.

[21]  Li-zhen Fan,et al.  Porous film host-derived 3D composite polymer electrolyte for high-voltage solid state lithium batteries , 2020 .

[22]  Dewei Chu,et al.  Enhanced Electrochemical Performance of Ni-Rich Cathode Materials with Li1.3Al0.3Ti1.7(PO4)3 Coating , 2020 .

[23]  Luyi Yang,et al.  Stable Interface between Lithium and Electrolyte Facilitated by a Nanocomposite Protective Layer , 2020 .

[24]  C. Heubner,et al.  Synthesis and sintering of Li1.3Al0.3Ti1.7(PO4)3 (LATP) electrolyte for ceramics with improved Li+ conductivity , 2020, Journal of Alloys and Compounds.

[25]  F. Tietz,et al.  Structure and ion transport of lithium-rich Li1+xAlxTi2−x(PO4)3 with 0.3, 2020 .

[26]  Liquan Chen,et al.  Increasing Poly(ethylene oxide) Stability to 4.5 V by Surface Coating of the Cathode , 2020 .

[27]  K. Stevenson,et al.  Correlating structure and transport properties in pristine and environmentally-aged superionic conductors based on Li1.3Al0.3Ti1.7(PO4)3 ceramics , 2020, Journal of Power Sources.

[28]  R. Li,et al.  Design of a mixed conductive garnet/Li interface for dendrite-free solid lithium metal batteries , 2020 .

[29]  Xiaoping Yang,et al.  Ultraviolet irradiated PEO/LATP composite gel polymer electrolytes for lithium-metallic batteries (LMBs) , 2019, Applied Surface Science.

[30]  Jong-Hyeok Choi,et al.  Preparation of Highly Porous PAN-LATP Membranes as Separators for Lithium Ion Batteries , 2019, Nanomaterials.

[31]  F. Tietz,et al.  Impact of sintering temperature on phase formation, microstructure, crystallinity and ionic conductivity of Li1.5Al0.5Ti1.5(PO4)3 , 2019, Solid State Ionics.

[32]  Hui Wang,et al.  Synthesis and Properties of NASICON-type LATP and LAGP Solid Electrolytes. , 2019, ChemSusChem.

[33]  K. Du,et al.  Surface structure decoration of high capacity Li1.2Mn0.54Ni0.13Co0.13O2 cathode by mixed conductive coating of Li1.4Al0.4Ti1.6(PO4)3 and polyaniline for lithium-ion batteries , 2019, Journal of Power Sources.

[34]  J. Malzbender,et al.  Influence of sintering temperature on conductivity and mechanical behavior of the solid electrolyte LATP , 2019, Ceramics International.

[35]  Yan‐Bing He,et al.  Constructing Multifunctional Interphase between Li1.4Al0.4Ti1.6(PO4)3 and Li Metal by Magnetron Sputtering for Highly Stable Solid‐State Lithium Metal Batteries , 2019, Advanced Energy Materials.

[36]  Kai Yan,et al.  Stabilizing Solid Electrolyte-Anode Interface in Li-Metal Batteries by Boron Nitride-Based Nanocomposite Coating , 2019, Joule.

[37]  Lei Song,et al.  Enhanced Electrochemical and Safety Performance of Lithium Metal Batteries Enabled by the Atom Layer Deposition on PVDF-HFP Separator , 2019, ACS Applied Energy Materials.

[38]  Ya‐Xia Yin,et al.  Engineering Janus Interfaces of Ceramic Electrolyte via Distinct Functional Polymers for Stable High-Voltage Li-Metal Batteries. , 2019, Journal of the American Chemical Society.

[39]  Kun Zhang,et al.  Stabilizing a high-voltage LiNi0.5Mn1.5O4 cathode towards all solid state batteries: a Li-Al-Ti-P-O solid electrolyte nano-shell with a host material. , 2019, Nanoscale.

[40]  Jiujun Zhang,et al.  Recent advances in Li1+xAlxTi2−x(PO4)3 solid-state electrolyte for safe lithium batteries , 2019, Energy Storage Materials.

[41]  T. Nakayama,et al.  Fabrication and electrochemical properties of Li1.3Al0.3Ti1.7(PO4)3 solid electrolytes by sol-gel method , 2019, Applied Surface Science.

[42]  Lehao Liu,et al.  Li1.4Al0.4Ti1.6(PO4)3 nanoparticle-reinforced solid polymer electrolytes for all-solid-state lithium batteries , 2019, Solid State Ionics.

[43]  Yuria Saito,et al.  Effect of the Morphological Features of the Poly(vinylidene difluoride)-Based Gel Electrolytes on the Ionic Mobility for Lithium Secondary Batteries , 2019, Macromolecules.

[44]  Xin-Bing Cheng,et al.  Recent Advances in Energy Chemistry between Solid-State Electrolyte and Safe Lithium-Metal Anodes , 2019, Chem.

[45]  N. Imanishi,et al.  Lithium-ion conduction of Li1.4Al0.4Ti1.6(PO4)3-GeO2 composite solid electrolyte , 2019, Solid State Ionics.

[46]  Dewei Chu,et al.  Electrochemical performance of Li1.2Ni0.2Mn0.6O2 coated with a facilely synthesized Li1.3Al0.3Ti1.7(PO4)3 , 2018, Journal of Power Sources.

[47]  Zhaohui Li,et al.  Fabrication and electrochemical properties of LATP/PVDF composite electrolytes for rechargeable lithium-ion battery , 2018, Solid State Ionics.

[48]  Fanli Meng,et al.  Enhanced ionic conductivity and chemical stability of Li1.3Al0.3Ti1.7(PO4)3 by doping of WO3 , 2018, Materials Letters.

[49]  Yan‐Bing He,et al.  Low Resistance–Integrated All‐Solid‐State Battery Achieved by Li7La3Zr2O12 Nanowire Upgrading Polyethylene Oxide (PEO) Composite Electrolyte and PEO Cathode Binder , 2018, Advanced Functional Materials.

[50]  Jer‐Huan Jang,et al.  LATP ionic conductor and in-situ graphene hybrid-layer coating on LiFePO4 cathode material at different temperatures , 2018, Journal of Alloys and Compounds.

[51]  E. Gomez,et al.  Development of a ReaxFF reactive force field for lithium ion conducting solid electrolyte Li1+xAlxTi2-x(PO4)3 (LATP). , 2018, Physical chemistry chemical physics : PCCP.

[52]  Qian Sun,et al.  Stabilizing the Interface of NASICON Solid Electrolyte against Li Metal with Atomic Layer Deposition. , 2018, ACS applied materials & interfaces.

[53]  Linda F. Nazar,et al.  New horizons for inorganic solid state ion conductors , 2018 .

[54]  Liquan Chen,et al.  Surface-protected LiCoO2 with ultrathin solid oxide electrolyte film for high-voltage lithium ion batteries and lithium polymer batteries , 2018, Journal of Power Sources.

[55]  C. Nan,et al.  Improving low-temperature performance of spinel LiNi0.5Mn1.5O4 electrode and LiNi0.5Mn1.5O4/Li4Ti5O12 full-cell by coating solid-state electrolyte Li-Al-Ti-P-O , 2018, Journal of Power Sources.

[56]  Xiaoting Lin,et al.  Boosting the performance of lithium batteries with solid-liquid hybrid electrolytes: Interfacial properties and effects of liquid electrolytes , 2018, Nano Energy.

[57]  Ya‐Xia Yin,et al.  Mitigating Interfacial Potential Drop of Cathode-Solid Electrolyte via Ionic Conductor Layer To Enhance Interface Dynamics for Solid Batteries. , 2018, Journal of the American Chemical Society.

[58]  Q. You,et al.  Electric-Field-Directed Parallel Alignment Architecting 3D Lithium-Ion Pathways within Solid Composite Electrolyte. , 2018, ACS applied materials & interfaces.

[59]  T. Kozawa,et al.  Influence of LiBO2 addition on the microstructure and lithium-ion conductivity of Li1+xAlxTi2−x(PO4)3(x = 0.3) ceramic electrolyte , 2018 .

[60]  D. Portehault,et al.  Microwave-assisted reactive sintering and lithium ion conductivity of Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 solid electrolyte , 2018 .

[61]  Li-zhen Fan,et al.  3D Fiber-Network-Reinforced Bicontinuous Composite Solid Electrolyte for Dendrite-free Lithium Metal Batteries. , 2018, ACS applied materials & interfaces.

[62]  F. Ding,et al.  Facile synthesis of NASICON-type Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte and its application for enhanced cyclic performance in lithium ion batteries through the introduction of an artificial Li3PO4 SEI layer , 2017 .

[63]  Benji Maruyama,et al.  3D Printable Ceramic–Polymer Electrolytes for Flexible High‐Performance Li‐Ion Batteries with Enhanced Thermal Stability , 2017 .

[64]  Sen Xin,et al.  A Plastic-Crystal Electrolyte Interphase for All-Solid-State Sodium Batteries. , 2017, Angewandte Chemie.

[65]  C. Yoon,et al.  Characterization of Sputter-Deposited LiCoO2 Thin Film Grown on NASICON-type Electrolyte for Application in All-Solid-State Rechargeable Lithium Battery. , 2017, ACS applied materials & interfaces.

[66]  Jyotirmoy Mandal,et al.  A Flexible Solid Composite Electrolyte with Vertically Aligned and Connected Ion-Conducting Nanoparticles for Lithium Batteries. , 2017, Nano letters.

[67]  M. Hoffmann,et al.  Influence of the secondary phase LiTiOPO4 on the properties of Li1 + xAlxTi2 − x(PO4)3 (x = 0; 0.3) , 2017 .

[68]  Hao Wen,et al.  Facile Synthesis of Nanosized Lithium-Ion-Conducting Solid Electrolyte Li1.4Al0.4Ti1.6(PO4)3 and Its Mechanical Nanocomposites with LiMn2O4 for Enhanced Cyclic Performance in Lithium Ion Batteries. , 2017, ACS applied materials & interfaces.

[69]  Eongyu Yi,et al.  Lithium Ion Conducting Poly(ethylene oxide)-Based Solid Electrolytes Containing Active or Passive Ceramic Nanoparticles , 2017 .

[70]  D. Kanchan,et al.  Effect of doping of trivalent cations Ga 3+ , Sc 3+ , Y 3+ in Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 (LATP) system on Li + ion conductivity , 2016 .

[71]  A. Orliukas,et al.  NMR Investigations in Li1.3Al0.3Ti1.7(PO4)3 Ceramics. Part I: Structural Aspect , 2016 .

[72]  Shaofei Wang,et al.  Durability of the Li1+xTi2–xAlx(PO4)3 Solid Electrolyte in Lithium–Sulfur Batteries , 2016 .

[73]  C. Nan,et al.  Preparation and evaluation of high lithium ion conductivity Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte obtained using a new solution method , 2016 .

[74]  L. Wüllen,et al.  Study of the glass-to-crystal transformation of the NASICON-type solid electrolyte Li1 + xAlxGe2 − x(PO4)3 , 2016 .

[75]  R. Eichel,et al.  Influence of microstructure and AlPO4 secondary-phase on the ionic conductivity of Li1.3Al0.3Ti1.7(PO4)3 solid-state electrolyte , 2016 .

[76]  F. Tietz,et al.  A single crystal X-ray and powder neutron diffraction study on NASICON-type Li1+xAlxTi2−x(PO4)3 (0 ≤ x ≤ 0.5) crystals: Implications on ionic conductivity , 2016 .

[77]  Erqing Zhao,et al.  Pechini synthesis of high ionic conductivity Li1.3Al0.3Ti1.7 (PO4)3 solid electrolytes: The effect of dispersant , 2016 .

[78]  W. West,et al.  Effects of sintering temperature on interfacial structure and interfacial resistance for all-solid-state rechargeable lithium batteries , 2016 .

[79]  Shaofei Wang,et al.  Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte. , 2016, Journal of the American Chemical Society.

[80]  Joon-Hyung Lee,et al.  Mixed Electronic and Ionic Conductor-Coated Cathode Material for High-Voltage Lithium Ion Battery. , 2016, ACS applied materials & interfaces.

[81]  Ming Liu,et al.  SiO2 Hollow Nanosphere‐Based Composite Solid Electrolyte for Lithium Metal Batteries to Suppress Lithium Dendrite Growth and Enhance Cycle Life , 2016 .

[82]  Michael J. Hoffmann,et al.  Lithium Diffusion Pathway in Li(1.3)Al(0.3)Ti(1.7)(PO4)3 (LATP) Superionic Conductor. , 2016, Inorganic chemistry.

[83]  Jae-won Lee,et al.  Improved electrochemical properties of Li(Ni 0.6 Mn 0.2 Co 0.2 )O 2 by surface coating with Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 , 2016 .

[84]  Yizhou Zhu,et al.  First principles study on electrochemical and chemical stability of solid electrolyte–electrode interfaces in all-solid-state Li-ion batteries , 2016 .

[85]  Q. Ma,et al.  A Novel Sol–Gel Method for Large‐Scale Production of Nanopowders: Preparation of Li1.5Al0.5Ti1.5(PO4)3 as an Example , 2016 .

[86]  Michael J. Hoffmann,et al.  Thermal properties and ionic conductivity of Li1,3Ti1,7Al0,3(PO4)3 solid electrolytes sintered by field-assisted sintering , 2016, Ionics.

[87]  Q. Ma,et al.  Very fast bulk Li ion diffusivity in crystalline Li(1.5)Al(0.5)Ti(1.5)(PO4)3 as seen using NMR relaxometry. , 2015, Physical chemistry chemical physics : PCCP.

[88]  C. Nan,et al.  Effect of temperature of Li 2 O-Al 2 O 3 -TiO 2 -P 2 O 5 solid-state electrolyte coating process on the performance of LiNi 0.5 Mn 1.5 O 4 cathode materials , 2015 .

[89]  Yizhou Zhu,et al.  Origin of Outstanding Stability in the Lithium Solid Electrolyte Materials: Insights from Thermodynamic Analyses Based on First-Principles Calculations. , 2015, ACS applied materials & interfaces.

[90]  L. Stanciu,et al.  Field-assisted sintering of Li1.3Al0.3Ti1.7(PO4)3 solid-state electrolyte , 2015 .

[91]  Zhixing Wang,et al.  Preparation and properties of Li1.3Al0.3Ti1.7(PO4)3 by spray-drying and post-calcining method , 2015 .

[92]  Kwang Man Kim,et al.  Effects of preparation conditions on the ionic conductivity of hydrothermally synthesized Li1+xAlxTi2-x(PO4)3 solid electrolytes , 2015 .

[93]  C. Elsässer,et al.  Lithium Ion Conduction in LiTi2(PO4)3 and Related Compounds Based on the NASICON Structure: A First-Principles Study , 2015 .

[94]  A. Hintennach,et al.  Preparation and characterization of sol–gel derived high lithium ion conductive NZP-type ceramics Li1+x AlxTi2−x(PO4)3 , 2015 .

[95]  R. Jiménez,et al.  High lithium ion conducting solid electrolytes based on NASICON Li1+xAlxM2−x(PO4)3 materials (M=Ti, Ge and 0≤x≤0.5) , 2015 .

[96]  Wei Liu,et al.  Ionic conductivity enhancement of polymer electrolytes with ceramic nanowire fillers. , 2015, Nano letters.

[97]  Masahiro Kinoshita,et al.  Capacity fade of LiAlyNi1−x−yCoxO2 cathode for lithium-ion batteries during accelerated calendar and cycle life tests (surface analysis of LiAlyNi1−x−yCoxO2 cathode after cycle tests in restricted depth of discharge ranges) , 2014 .

[98]  V. Kalinnikov,et al.  Sol-gel synthesis of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte , 2014, Russian Journal of Inorganic Chemistry.

[99]  A. Mukhopadhyay,et al.  Spark plasma sintered/synthesized dense and nanostructured materials for solid-state Li-ion batteries: Overview and perspective , 2014 .

[100]  M. Kotobuki,et al.  Preparation of Li1.5Al0.5Ti1.5(PO4)3 solid electrolyte via a co-precipitation method , 2013, Ionics.

[101]  Zhian Zhang,et al.  Enhanced electrochemical performance of poly(ethylene oxide) based composite polymer electrolyte by incorporation of nano-sized metal-organic framework , 2013 .

[102]  T. Leichtweiss,et al.  Degradation of NASICON-Type Materials in Contact with Lithium Metal: Formation of Mixed Conducting Interphases (MCI) on Solid Electrolytes , 2013 .

[103]  M. Hoelzel,et al.  Structural factors that enhance lithium mobility in fast-ion Li(1+x)Ti(2-x)Al(x)(PO4)3 (0 ≤ x ≤ 0.4) conductors investigated by neutron diffraction in the temperature range 100-500 K. , 2013, Inorganic chemistry.

[104]  M. Kotobuki,et al.  Preparation of Li1.5Al0.5Ti1.5(PO4)3 solid electrolyte via a sol–gel route using various Al sources , 2013 .

[105]  K. Amine,et al.  Formation of the spinel phase in the layered composite cathode used in Li-ion batteries. , 2012, ACS nano.

[106]  K. Kanamura,et al.  Fabrication of LiNi0.5Mn1.5O4 thin film cathode by PVP sol–gel process and its application of all-solid-state lithium ion batteries using Li1 + xAlxTi2 − x(PO4)3 solid electrolyte , 2012 .

[107]  J. Vaughey,et al.  Solution-Based Synthesis and Characterization of Lithium-Ion Conducting Phosphate Ceramics for Lithium Metal Batteries , 2012 .

[108]  Jean-Marie Tarascon,et al.  Li-O2 and Li-S batteries with high energy storage. , 2011, Nature materials.

[109]  M. Schroeder,et al.  Influence of spray granulation on the properties of wet chemically synthesized Li1.3Ti1.7Al0.3(PO4)3 (LATP) powders , 2011 .

[110]  Z. Wen,et al.  Electrochemical properties of Li1.4Al0.4Ti1.6(PO4)3 synthesized by a co-precipitation method , 2011 .

[111]  Y. Qiu,et al.  Fabrication and characterization of LATP/PAN composite fiber-based lithium-ion battery separators , 2011 .

[112]  Paul C. Johnson,et al.  Effect of microstructure on the conductivity of a NASICON-type lithium ion conductor , 2011 .

[113]  J. Goodenough,et al.  Challenges for Rechargeable Li Batteries , 2010 .

[114]  Z. Wen,et al.  Dense nanostructured solid electrolyte with high Li-ion conductivity by spark plasma sintering technique , 2008 .

[115]  M. Armand,et al.  Building better batteries , 2008, Nature.

[116]  A. P. Stepanov,et al.  Lithium conductivity and lithium diffusion in NASICON-type Li1+xTi2–xAlx(PO4)3 (x= 0; 0.3) prepared by mechanical activation , 2008 .

[117]  Venkataraman Thangadurai,et al.  Fast Lithium Ion Conduction in Garnet‐Type Li7La3Zr2O12 , 2007 .

[118]  Xuelin Yang,et al.  High lithium ion conductivity glass-ceramics in Li2O–Al2O3–TiO2–P2O5 from nanoscaled glassy powders by mechanical milling , 2006 .

[119]  Z. A. Munir,et al.  The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method , 2006 .

[120]  K. Tadanaga,et al.  New, Highly Ion‐Conductive Crystals Precipitated from Li2S–P2S5 Glasses , 2005 .

[121]  Michel Armand,et al.  The plastic-crystalline phase of succinonitrile as a universal matrix for solid-state ionic conductors , 2004, Nature materials.

[122]  Xin Hai Li,et al.  Synthesis of Li1.3Al0.3Ti1.7(PO4)3 by sol–gel technique , 2004 .

[123]  K. Arbi,et al.  Dependence of Ionic Conductivity on Composition of Fast Ionic Conductors Li1+xTi2-xAlx(PO4)3, 0 ≤ x ≤ 0.7. A Parallel NMR and Electric Impedance Study , 2002 .

[124]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.

[125]  Kazunari Yoshizawa,et al.  Lithium ion migration pathways in LiTi2(PO4)3 and related materials , 1999 .

[126]  K. Abraham,et al.  Preparation of micron-sized Li{sub 4}Ti{sub 5}O{sub 12} and its electrochemistry in polyacrylonitrile electrolyte-based lithium cells , 1998 .

[127]  Jie Fu.  Fast Li+ ion conducting glass-ceramics in the system Li2O–Al2O3–GeO2–P2O5 , 1997 .

[128]  Jie Fu.  Superionic conductivity of glass-ceramics in the system Li 2O- Al 2O 3-TiO 2-P 2O 5 , 1997 .

[129]  G. Jellison,et al.  A Stable Thin‐Film Lithium Electrolyte: Lithium Phosphorus Oxynitride , 1997 .

[130]  M. Armand,et al.  Physical properties of solid polymer electrolyte PEO(LiTFSI) complexes , 1995 .

[131]  Takashi Uchida,et al.  High ionic conductivity in lithium lanthanum titanate , 1993 .

[132]  Y. Sadaoka,et al.  Electrical property and sinterability of LiTi2(PO4)3 mixed with lithium salt (Li3PO4 or Li3BO3) , 1991 .

[133]  Y. Sadaoka,et al.  Ionic Conductivity of Solid Electrolytes Based on Lithium Titanium Phosphate , 1990 .

[134]  P. Bruce,et al.  The A‐C Conductivity of Polycrystalline LISICON, Li2 + 2x Zn1 − x GeO4, and a Model for Intergranular Constriction Resistances , 1983 .

[135]  John B. Goodenough,et al.  Fast Na+-ion transport in skeleton structures , 1976 .

[136]  F. Pan,et al.  Revealing cooperative Li-ion migration in Li1+xAlxTi2−x(PO4)3 solid state electrolytes with high Al doping , 2020 .

[137]  Luyi Yang,et al.  Mechanisms and properties of ion-transport in inorganic solid electrolytes , 2018 .

[138]  John B. Goodenough,et al.  Electrochemical energy storage in a sustainable modern society , 2014 .

[139]  F. Rosciano,et al.  Grain boundary resistance of fast lithium ion conductors: Comparison between a lithium-ion conductive Li–Al–Ti–P–O-type glass ceramic and a Li1.5Al0.5Ge1.5P3O12 ceramic , 2012 .

[140]  D. Chehimi,et al.  Lithium Mobility in Li1.2Ti1.8R0.2(PO4)3 Compounds (R = Al, Ga, Sc, In) as Followed by NMR and Impedance Spectroscopy , 2004 .