Estimating the Mechanical Properties of Rock Masses

Reliably estimating the mechanical properties of discontinuous rock masses remains one of the greatest challenges faced in the discipline of rock mechanics. This paper discusses the development, uses and limitations of the Hoek–Brown empirical rock and rock mass strength criterion, some of the extensions made to the criterion by others, and associated methods of estimating rock mass deformabilities. Extreme care must be taken in extending the use of these approaches beyond reasonable limits. Modern methods of predicting the engineering responses of rocks and rock masses using advanced numerically-intensive methods provide a sound and promising basis for developing improved understandings of the engineering responses of rock masses and for making improved predictions of rock mass properties and performance.

[1]  Nick Barton,et al.  Some new Q-value correlations to assist in site characterisation and tunnel design , 2002 .

[2]  Edwin T. Brown,et al.  Strength of a Model of Jointed Rock , 1970 .

[3]  P. Kaiser.  ROCK MECHANICS CONSIDERATIONS FOR CONSTRUCTION OF DEEP TUNNELS IN BRITTLE ROCK , 2006 .

[4]  P. K. Kaiser,et al.  Determination of residual strength parameters of jointed rock masses using the GSI system , 2007 .

[5]  E. Hoek,et al.  A brief history of the development of the Hoek-Brown failure criterion , 2007, Soils and Rocks.

[6]  E. T. Brown,et al.  A study of the mechanical behaviour of coal for pillar design , 1998 .

[7]  Musharraf Zaman,et al.  Estimation of bearing capacity of basalts at the Atasu dam site, Turkey , 2008 .

[8]  Diederichs,et al.  Application of modified Hoek-Brown transition relationships for assessing strength and post yield behaviour at both ends of the rock competence scale , 2008 .

[9]  Mark S. Diederichs,et al.  Damage initiation and propagation in hard rock during tunnelling and the influence of near-face stress rotation , 2004 .

[10]  K. W. John.  An Approach to Rock Mechanics , 1962 .

[11]  Edwin T. Brown,et al.  Strength of Models of Rock with Intermittent Joints , 1970 .

[12]  K. Douglas,et al.  Strength Of Intact Rock And Rock Masses , 2000 .

[13]  Kurt Douglas,et al.  The shear strength of rock masses , 2002 .

[14]  E. Hoek,et al.  Empirical estimation of rock mass modulus , 2006 .

[15]  J. C. Jaeger.  Shear Failure of Anistropic Rocks , 1960, Geological Magazine.

[16]  Evert Hoek,et al.  HOEK-BROWN FAILURE CRITERION - 2002 EDITION , 2002 .

[17]  C. Martin,et al.  Seventeenth Canadian Geotechnical Colloquium: The effect of cohesion loss and stress path on brittle rock strength , 1997 .

[18]  P. K. Kaiser,et al.  Support of underground excavations in hard rock , 1995 .

[19]  Evert Hoek,et al.  Variability of the engineering properties of rock masses quantified by the geological strength index: the case of ophiolites with special emphasis on tunnelling , 2006 .

[20]  Andrei V. Lyamin,et al.  Stability charts for rock slopes based on the Hoek-Brown failure criterion , 2008 .

[21]  N. Cook,et al.  THE FAILURE OF ROCK , 1965 .

[22]  Bernard Amadei,et al.  Strength of a regularly jointed rock mass under biaxial and axisymmetric loading conditions , 1988 .

[23]  K. W. John.  Civil Engineering Approach To Evaluate Strength And Deformability Of Regularly Jointed Rock , 1969 .

[24]  R. J. Pine,et al.  A new discrete fracture modelling approach for rock masses , 2007 .

[25]  E. Hoek,et al.  Applicability of the geological strength index (GSI) classification for very weak and sheared rock masses. The case of the Athens Schist Formation , 1998 .

[26]  The Estimation of Post-Peak Rock Mass Properties: Numerical Back Analysis Calibrated using In Situ Instrumentation Data , 2006 .

[27]  J. Clausen,et al.  An exact implementation of the Hoek–Brown criterion for elasto-plastic finite element calculations , 2008 .

[28]  Fei Wang,et al.  The modelling of multi‐fracturing solids and particulate media , 2004 .

[29]  R. Ucar,et al.  Determination of Shear Failure Envelope in Rock Masses , 1986 .

[30]  Evert Hoek,et al.  Strength of jointed rock masses , 1983 .

[31]  P. K. Kaiser,et al.  Hoek-Brown parameters for predicting the depth of brittle failure around tunnels , 1999 .

[32]  Diederichs,et al.  Underground Works In Hard Rock Tunnelling And Mining , 2000 .

[33]  Pieter A. Vermeer,et al.  A Hoek–Brown criterion with intrinsic material strength factorization , 2008 .

[34]  G. Reik,et al.  STRENGTH AND DEFORMATION CHARACTERISTICS OF JOINTED MEDIA IN TRUE TRIAXIAL COMPRESSION , 1978 .

[35]  Patrick MacGregor,et al.  Geotechnical Engineering of Dams , 2014 .

[36]  P. Cundall,et al.  A bonded-particle model for rock , 2004 .

[37]  P. A. Cundall,et al.  A Synthetic Rock Mass Model For Jointed Rock , 2007 .

[38]  John A. Hudson,et al.  A Simplified Three Dimensional Hoek-Brown Yield Criterion , 1988 .

[39]  Evert Hoek,et al.  Practical estimates of rock mass strength , 1997 .

[40]  Davide Elmo,et al.  The Development of a new Numerical Modelling Approach for Naturally Fractured Rock Masses , 2006 .

[41]  E. T. Brown,et al.  Underground excavations in rock , 1980 .

[42]  Z. Bieniawski.  Determining rock mass deformability: experience from case histories , 1978 .

[43]  E. T. Brown,et al.  Yield of a soft, high porosity rock , 1985 .

[44]  P. Londe.  Discussion of "Determination of the Shear Failure Envelope in Rock Masses" , 1988 .

[45]  E. Hoek,et al.  Estimating the geotechnical properties of heterogeneous rock masses such as flysch , 2001 .

[46]  Nick Barton,et al.  Engineering classification of rock masses for the design of tunnel support , 1974 .

[47]  Scott W. Sloan,et al.  Limit analysis solutions for the bearing capacity of rock masses using the generalised Hoek–Brown criterion , 2006 .

[48]  Emmanuel M Detournay,et al.  Elastoplastic model of a deep tunnel for a rock with variable dilatancy , 1986 .

[49]  E. T. Brown,et al.  EMPIRICAL STRENGTH CRITERION FOR ROCK MASSES , 1980 .

[50]  G. Tsiambaos,et al.  A modified Hoek-Brown failure criterion for anisotropic intact rock , 2008 .

[51]  E. Alonso,et al.  Considerations of the dilatancy angle in rocks and rock masses , 2005 .

[52]  Ming Cai,et al.  Generalized crack initiation and crack damage stress thresholds of brittle rock masses near underground excavations , 2004 .

[53]  S. D. Priest,et al.  Determination of Shear Strength and Three-dimensional Yield Strength for the Hoek-Brown Criterion , 2005 .

[54]  P. Pells.  What happened to the mechanics in rock mechanics and the geology in engineering geology , 2008 .

[55]  C. Fairhurst,et al.  The elasto-plastic response of underground excavations in rock masses that satisfy the Hoek-Brown failure criterion , 1999 .

[56]  Ian W. Johnston,et al.  Strength of Weathered Melbourne Mudstone , 1984 .

[57]  P. K. Kaiser,et al.  Estimation of rock mass deformation modulus and strength of jointed hard rock masses using the GSI system , 2004 .

[58]  Evert Hoek,et al.  Geological Strength Index (GSI). A characterization tool for assessing engineering properties for rock masses , 2007 .

[59]  D. Bernaud,et al.  Elastoplastic behavior of jointed rock masses as homogenized media and finite element analysis , 2008 .

[60]  Diederichs,et al.  An Approach For Prediction of Strength And Post Yield Behaviour For Rock Masses of Low Intact Strength , 2007 .

[61]  J. C. Jaeger,et al.  Fundamentals of rock mechanics , 1969 .

[62]  Jrl Read.  Rock Slope Stability Research , 2007 .