Grafted polymer electrolyte membrane for direct methanol fuel cells

[1]  V. Antonucci,et al.  Investigation of grafted ETFE-based polymer membranes as alternative electrolyte for direct methanol fuel cells , 2003 .

[2]  T. Kallio,et al.  Effects of a fuel cell test on the structure of irradiation grafted ion exchange membranes based on different fluoropolymers , 2003 .

[3]  Naoki Hasegawa,et al.  Cell performances of direct methanol fuel cells with grafted membranes , 2002 .

[4]  K. V. Lovell,et al.  Synthesis and characterisation of sulfonic acid-containing ion exchange membranes based on hydrocarbon and fluorocarbon polymers , 2002 .

[5]  Keith Scott,et al.  Performance of the direct methanol fuel cell with radiation-grafted polymer membranes , 2000 .

[6]  H. Wang,et al.  Behavior of Raipore Radiation‐Grafted Polymer Membranes in H 2 / O 2 Fuel Cells , 1998 .

[7]  Keith Scott,et al.  The degree and effect of methanol crossover in the direct methanol fuel cell , 1998 .

[8]  Kyoichi Saito,et al.  Proton Transport Through Polyethylene‐Tetrafluoroethylene‐Copolymer‐Based Membrane Containing Sulfonic Acid Group Prepared by RIGP , 1996 .

[9]  B. Gupta,et al.  Performance of Differently Cross‐Linked, Partially Fluorinated Proton Exchange Membranes in Polymer Electrolyte Fuel Cells , 1995 .

[10]  T. Kallio,et al.  Electrochemical characterization of radiation-grafted ion-exchange membranes based on different matrix polymers , 2002 .

[11]  M. Barak,et al.  Power Sources 4 , 1974 .

[12]  J. Bockris,et al.  Fuel cells : their electrochemistry , 1969 .