Influence of excitation amplitude on the characteristics of nonlinear butyl rubber isolators

The purpose of this study is to explore the advantages and characteristics of nonlinear butyl rubber (type IIR) isolators in vibratory shear by comparison with linear isolators. It is known that the mechanical properties of viscoelastic materials exhibit significant frequency and temperature dependence, and in some cases, nonlinear dynamic behavior as well. Nonlinear characteristics in shear deformation are reflected in mechanical properties such as stiffness and damping. Furthermore, even when the excitation amplitude is small the response amplitude may often be large enough that nonlinearities cannot be ignored. The treatment involves developing phenomenological models of the effective storage modulus and effective loss factor of a rubber isolator material as a function of excitation amplitude. The transmissibility of a nonlinear viscoelastic isolator is compared with that of a linear isolator using an equivalent linear damping coefficient. Forced resonance vibration and impedance tests are used to characterize nonlinear parameters and to measure the normalized transmissibility. It is found that as the excitation amplitude of the nonlinear viscoelastic isolator increases, the response amplitude decreases and the transmissibility is improved over that of the linear isolator for excitation frequency that exceeds a particular value governed by the temperature and excitation amplitude. The method of multiple scales and numerical simulations are used to predict the response characteristics of the isolator based on the phenomenological modeling under different values of system parameters.

[1]  David I. G. Jones.  Handbook of Viscoelastic Vibration Damping , 2001 .

[2]  R. Gibson.  Principles of Composite Material Mechanics , 1994 .

[3]  D. E. Cantey,et al.  Thermomechanical response studies of solid propellants subjected to cyclic and random loading. , 1965 .

[4]  Gregory B. McKenna,et al.  Time Dependent Volume and Enthalpy Responses in Polymers , 2000 .

[5]  A. Schallamach,et al.  Dynamic behavior of natural rubber during large extensions , 1967 .

[6]  S. S. Sattinger.  Direct Method for Measuring the Dynamic Shear Properties of Damping Polymers , 1990 .

[7]  D.I.G. Jones,et al.  Temperature-frequency dependence of dynamic properties of damping materials , 1974 .

[8]  J. Ferry.  Viscoelastic properties of polymers , 1961 .

[9]  Myung Sik Lee,et al.  Design of Engine Mount Using Finite Element Method and Optimization Technique , 1998 .

[10]  Prabhu Kandachar,et al.  A Constitutive Model for Long-Term Behavior of Polymers , 2000 .

[11]  A. Schallamach,et al.  Dynamic behaviour of rubber during moderate extensions , 1965 .

[12]  Thomas W. Strganac,et al.  An Approach to Characterize Nonlinear Viscoelastic Material Behavior Using Dynamic Mechanical Tests and Analyses , 1996, Aerospace and Materials.

[13]  Jan L. Spoormaker,et al.  Implementation of Constitutive Model in FEA for Nonlinear Behavior of Plastics , 2000 .

[14]  B. Lazan.  Damping of materials and members in structural mechanics , 1968 .

[15]  R. Christensen,et al.  Theory of Viscoelasticity , 1971 .

[16]  David G. Jones,et al.  Vibration and Shock in Damped Mechanical Systems , 1968 .

[17]  B. G. Kao,et al.  Finite Element Analysis of Viscoelastic Elastomeric Structures Vibrating about Non-Linear Statically Stressed Configurations , 1981 .

[18]  Matthew Huang,et al.  Use of Body Mount Stiffness and Damping In CAE Crash Modeling , 2000 .

[19]  T. Murayama,et al.  Dynamic mechanical analysis of polymeric material , 1978 .

[20]  F. J. Lockett,et al.  Nonlinear viscoelastic solids , 1972 .

[21]  H. McCallion,et al.  Behaviour of Rubber in Compression under Dynamic Conditions , 1955 .

[22]  Istvan L. Ver.  Measurement of Dynamic Stiffness and Loss Factor of Elastic Mounts as a Function of Frequency and Static Load , 1974 .

[23]  Richard Schapery.  On the characterization of nonlinear viscoelastic materials , 1969 .