Additive manufacturing technologies of porous metal implants

Biomedical metal materials with good corrosion resistance and mechanical properties are widely used in orthopedic surgery and dental implant materials, but they can easily cause stress shielding due to the significant difference in elastic modulus between the implant and human bones. The elastic modulus of porous metals is lower than that of dense metals. Therefore, it is possible to adjust the pore parameters to make the elastic modulus of porous metals match or be comparable with that of the bone tissue. At the same time, the open porous metals with pores connected to each other could provide the structural condition for bone ingrowth, which is helpful in strengthening the biological combination of bone tissue with the implants. Therefore, the preparation technologies of porous metal implants and related research have been drawing more and more attention due to the excellent features of porous metals. Selective laser melting (SLM) and electron beam melting technology (EBM) are important research fields of additive manufacturing. They have the advantages of directly forming arbitrarily complex shaped metal parts which are suitable for the preparation of porous metal implants with complex shape and fine structure. As new manufacturing technologies, the applications of SLM and EBM for porous metal implants have just begun. This paper aims to understand the technology status of SLM and EBM, the research progress of porous metal implants preparation by using SLM and EBM, and the biological compatibility of the materials, individual design and manufacturing requirements. The existing problems and future research directions for porous metal implants prepared by SLM and EBM methods are discussed in the last paragraph.

[1]  M Bohner,et al.  Aqueous impregnation of porous beta-tricalcium phosphate scaffolds. , 2010, Acta biomaterialia.

[2]  M Browne,et al.  Long-term biocompatibility and osseointegration of electron beam melted, free-form–fabricated solid and porous titanium alloy: Experimental studies in sheep , 2013 .

[3]  Jianfeng Sun,et al.  Development of porous medical implant scaffolds via laser additive manufacturing , 2012 .

[4]  R. Singer,et al.  Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. , 2008, Acta biomaterialia.

[5]  Abhay Pandit,et al.  Fabrication methods of porous metals for use in orthopaedic applications. , 2006, Biomaterials.

[6]  Shivakumar Raman,et al.  Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM). , 2010, Journal of the mechanical behavior of biomedical materials.

[7]  L. Murr,et al.  Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies , 2012 .

[8]  S. Raman,et al.  A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications , 2011 .

[9]  D. Hungerford,et al.  Proximally coated ingrowth prostheses. A review. , 1997, Clinical orthopaedics and related research.

[10]  Eric A Nauman,et al.  Effect of porosity on the fluid flow characteristics and mechanical properties of tantalum scaffolds. , 2005, Journal of biomedical materials research. Part B, Applied biomaterials.

[11]  Lewis Mullen,et al.  Selective Laser Melting: a regular unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

[12]  J. Planell,et al.  Comparison of the mechanical properties between tantalum and nickel–titanium foams implant materials for bone ingrowth applications , 2007 .

[13]  N. Orhan,et al.  The effect of solution treatment under loading on the microstructure and phase transformation behavior of porous NiTi shape memory alloy fabricated by SHS , 2009 .

[14]  P. Fox,et al.  The development of a scanning strategy for the manufacture of porous biomaterials by selective laser melting , 2009, Journal of materials science. Materials in medicine.

[15]  R. Poggie,et al.  Wear evaluation of cobalt-chromium alloy for use in a metal-on-metal hip prosthesis. , 2004, Journal of biomedical materials research. Part B, Applied biomaterials.

[16]  A Piattelli,et al.  Direct laser metal sintering as a new approach to fabrication of an isoelastic functionally graded material for manufacture of porous titanium dental implants. , 2008, Dental materials : official publication of the Academy of Dental Materials.

[17]  J. Klawitter,et al.  Application of porous ceramics for the attachment of load bearing internal orthopedic applications , 1971 .

[18]  J. Weng,et al.  Macroporous Ti-based composite scaffold prepared by polymer impregnating method with calcium phosphate coatings , 2008 .

[19]  Patrick Ienny,et al.  Mechanical properties and non-homogeneous deformation of open-cell nickel foams: application of the mechanics of cellular solids and of porous materials , 2000 .

[20]  C. M. Agrawal.  Reconstructing the human body using biomaterials , 1998 .

[21]  Li Di-chenb,et al.  Development of the Additive Manufacturing(3D printing)Technology , 2013 .