Modelling of natural convective heat transfer at an internal surface

Abstract The determination of accurate surface convective heat transfer coefficients (CHTC) to model the heat flow within building interiors is of primary importance due to the effect of convection on the thermal comfort and the overall energy consumption of a building. Numerous theoretical and experimental expressions aiming at modelling the convective heat exchange of buoyancy-driven flows along vertical surfaces have been proposed. However, the case of a uniformly heated surface is not as exhaustively treated as that of the isothermal surface despite its relevance in many situations within building interiors. This paper is concerned with laminar and turbulent heat transfer modelling at internal vertical building surfaces (walls, windows, …) uniformly heated. Expressions of both local and average CHTC are derived from a theoretical analysis based on the integral formalism. A simplified expression of the average CHTC is then given as a function of the convective heat flux density (or the average temperature difference) and tested for building simulation purposes. The theoretical results are shown to be in close agreement with Alamdari and Hammond [F. Alamdari, G.P. Hammond, Improved data correlations for buoyancy-driven convection in rooms, Building Services Engineering Research & Technology 4 (1983) 106–112] improved correlation, as well as with experimental data derived from measurements performed on real-size enclosures. Despite the three-dimensionality and limited size of full-scale rooms, less than 10% difference is observed.

[1]  Guillaume Polidori,et al.  Transient flow rate behaviour in an external natural convection boundary layer , 2003 .

[2]  Abdul Jabbar N. Khalifa.  Natural convective heat transfer coefficient – a review: II. Surfaces in two- and three-dimensional enclosures , 2001 .

[3]  Petter Wallentén,et al.  Convective heat transfer coefficients in a full-scale room with and without furniture , 2001 .

[4]  C. Ni Riain,et al.  The development of an accurate tool to determine convective heat transfer coefficients in real buildings , 2005 .

[5]  F. Bayley.  An Analysis of Turbulent Free-convection Heat-transfer: , 1955 .

[6]  G. Polidori,et al.  Turbulent boundary-layer buoyant flow modeling over a wide Prandtl number range , 2004 .

[7]  R. H. Marshall,et al.  Validation of heat transfer coefficients on interior building surfaces using a real-sized indoor test cell , 1990 .

[8]  G. Polidori,et al.  Extension de la méthode de Kármán–Pohlhausen aux régimes transitoires de convection libre, pour Pr>0,6 , 2000 .

[9]  Ian Beausoleil-Morrison,et al.  The adaptive coupling of heat and air flow modelling within dynamic whole-building simulation , 2000 .

[10]  Hazim B. Awbi,et al.  Calculation of convective heat transfer coefficients of room surfaces for natural convection , 1998 .

[11]  A. E. Holdø,et al.  Natural convective heat transfer rates in rectangular enclosures , 1998 .

[12]  Christian Inard,et al.  Thermal experiments of full-scale dwelling cells in artificial climatic conditions , 1987 .

[13]  Abdul Jabbar N. Khalifa.  Natural convective heat transfer coefficient : a review. I. Isolated vertical and horizontal surfaces , 2001 .

[14]  Ian Beausoleil-Morrison.  The adaptive simulation of convective heat transfer at internal building surfaces , 2002 .

[15]  Geoffrey P. Hammond,et al.  Improved data correlations for buoyancy-driven convection in rooms , 1983 .

[16]  H. Awbi,et al.  Natural convection from heated room surfaces , 1999 .

[17]  Francis Allard.  Contribution a l'etude des transferts de chaleur dans les cavites thermiquement entrainees a grand nombre de rayleigh : application aux cellules d'habitation , 1987 .