Process performance improvement in a co-current, fixed bed biomass gasification facility by control system modifications.

Abstract Advanced control solutions are a developing technology which represent a promising approach to tackle problems related to efficiency and environmental aspects of biomass gasification process in a cost effective way. In this paper the potential of advanced control concept to improve gasification process efficiency and to reduce negative environmental effects of the process has been analysed. Advanced control solution, based on feedforward–feedback control approach has been developed using collected operation data and the effects of control concept on gasification process have been analysed using developed artificial neural network based prediction model. Measurement data for the controller and simulation model development has been extracted from a 75 MW th co-current, fixed bed biomass gasification plant operated by Technical University Dresden. The effects of 6 different process improvement goals for controller algorithms development have been analysed during 20 h of plant operation. The analysis has shown that with introduction of advanced control solutions process efficiency could be improved up to 20%, together with reduction of negative environmental aspects of the process.

[1]  Ibrahim Dincer,et al.  Thermodynamic analysis of hydrogen production from biomass gasification , 2010 .

[2]  J. C. Bruno,et al.  Artificial neural network models for biomass gasification in fluidized bed gasifiers. , 2013 .

[3]  Brian Elmegaard,et al.  Exergy analysis and optimization of a biomass gasification, solid oxide fuel cell and micro gas turbine hybrid system. , 2011 .

[4]  Yi Cao,et al.  Nonlinear model predictive control for the ALSTOM gasifier , 2006 .

[5]  Juan J. Hernández,et al.  Characterisation of tars from biomass gasification: effect of the operating conditions. , 2013 .

[6]  Chanchal Loha,et al.  Performance of fluidized bed steam gasification of biomass – Modeling and experiment , 2011 .

[7]  Ibrahim Dincer,et al.  Efficiency evaluation of a biomass gasification-based hydrogen production , 2011 .

[8]  M. Balat,et al.  Main routes for the thermo-conversion of biomass into fuels and chemicals. Part 1: Pyrolysis systems , 2009 .

[9]  Gpj Geert Verbong,et al.  Biomass gasification: Still promising? A 30-year global overview , 2011 .

[10]  Mohammad Asadullah,et al.  Barriers of commercial power generation using biomass gasification gas: A review , 2014 .

[11]  Derong Liu,et al.  Adaptive Dynamic Programming for Optimal Tracking Control of Unknown Nonlinear Systems With Application to Coal Gasification , 2014, IEEE Transactions on Automation Science and Engineering.

[12]  L. Puigjaner,et al.  Identification of a pilot scale fluidised-bed coal gasification unit by using neural networks , 2000 .

[13]  R. Moghadam,et al.  Investigation on syngas production via biomass conversion through the integration of pyrolysis and air–steam gasification processes , 2014 .

[14]  Ibrahim Dincer,et al.  Investigation of a multi-generation system using a hybrid steam biomass gasification for hydrogen, p , 2010 .

[15]  Marcelle C. McManus,et al.  Small-scale biomass gasification CHP utilisation in industry: Energy and environmental evaluation , 2014 .

[16]  Heejoon Kim,et al.  The reduction and control technology of tar during biomass gasification/pyrolysis: An overview , 2008 .

[17]  Chao Fu,et al.  Design optimization and analysis of a biomass gasification based BCHP system: A case study in Harbin, China , 2014 .

[18]  M. H. Chakrabarti,et al.  The effect of temperature on various parameters in coal, biomass and CO-gasification: A review , 2012 .

[19]  Suzana Yusup,et al.  Mathematical and computational approaches for design of biomass gasification for hydrogen production: A review , 2012 .

[20]  Nuwong Chollacoop,et al.  Alternative route of process modification for biofuel production by embedding the Fischer-Tropsch plant in existing stand-alone power plant (10 MW) based on biomass gasification - part I: A conceptual modeling and simulation approach (a case study in Thailand). , 2014 .

[21]  Hartmut Spliethoff,et al.  Performance of entrained flow and fluidised bed biomass gasifiers on different scales , 2013 .

[22]  M. Balat,et al.  Main routes for the thermo-conversion of biomass into fuels and chemicals. Part 2: Gasification systems , 2009 .

[23]  Rex T.L. Ng,et al.  Modelling and optimisation of biomass fluidised bed gasifier , 2013 .

[24]  T. Kannadasan,et al.  Biomass Downdraft Gasifier Controller Using Intelligent Techniques , 2012 .

[25]  H. Boerrigter,et al.  Review of applications of gases from biomass gasification , 2006 .

[26]  Adem Çiçek,et al.  Predictive modeling of performance of a helium charged Stirling engine using an artificial neural network , 2013 .

[27]  Amin Nobakhti,et al.  A simple self-adaptive Differential Evolution algorithm with application on the ALSTOM gasifier , 2008, Appl. Soft Comput..

[28]  Wei-hsin Chen,et al.  Taguchi approach for co-gasification optimization of torrefied biomass and coal. , 2013, Bioresource technology.

[29]  Mariagiovanna Minutillo,et al.  Modelling and performance analysis of an integrated plasma gasification combined cycle (IPGCC) power plant. , 2009 .

[30]  Pinakeswar Mahanta,et al.  Thermodynamic optimization of biomass gasification for decentralized power generation and Fischer–Tropsch synthesis , 2010 .

[31]  Dražen Lončar,et al.  Artificial neural network modelling approach for a biomass gasification process in fixed bed gasifiers. , 2014 .

[32]  Susanna Nilsson,et al.  Improving the performance of fluidized bed biomass/waste gasifiers for distributed electricity: A new three-stage gasification system , 2013 .

[33]  B. Kulkarni,et al.  Development of data-driven models for fluidized-bed coal gasification process , 2012 .

[34]  I. Obernberger,et al.  COMBUSTION AND GASIFICATION OF SOLID BIOMASS FOR HEAT AND POWER PRODUCTION IN EUROPE - STATE-OF-THE- ART AND RELEVANT FUTURE DEVELOPMENTS , 2008 .

[35]  Matthew J. De Kam,et al.  Biomass Integrated Gasification Combined Cycle for heat and power at ethanol plants. , 2009 .

[36]  Kyriakos D. Panopoulos,et al.  Integrated CHP with autothermal biomass gasification and SOFC–MGT , 2008 .

[37]  M. P. Morales,et al.  Biomass gasification for electricity generation: Review of current technology barriers , 2013 .

[38]  Dieter Boer,et al.  Integrated gasification combined cycle (IGCC) process simulation and optimization , 2010, Comput. Chem. Eng..

[39]  Carlos Leiva,et al.  Application of biomass gasification fly ash for brick manufacturing , 2011 .

[40]  Hojat Ghassemi,et al.  Effects of various operational parameters on biomass gasification process; a modified equilibrium model , 2014 .

[41]  E. Kırtay,et al.  Recent advances in production of hydrogen from biomass , 2011 .

[42]  Thore Berntsson,et al.  Gasification-based methanol production from biomass in industrial clusters: Characterisation of energy balances and greenhouse gas emissions , 2014 .

[43]  T. Takarada,et al.  Two-stage steam gasification of waste biomass in fluidized bed at low temperature: parametric investigations and performance optimization. , 2011, Bioresource technology.

[44]  M. Siedlecki,et al.  Biomass gasification as the first hot step in clean syngas production process – gas quality optimization and primary tar reduction measures in a 100 kW thermal input steam–oxygen blown CFB gasifier , 2011 .

[45]  Neven Duić,et al.  Modeling the energy potential of biomass – H2RES , 2009 .

[46]  Peter C. Young,et al.  Proportional-integral-plus (PIP) control of the ALSTOM gasifier problem , 2000 .