How to improve the energy-efficiency of electrical motor products

The influence factors on the energy-efficiency of electric motors, pumps and fans are put forward in this chapter. Suggestions to improve the energy-efficiency of electrical motor products are presented.

[1]  Sheam-Chyun Lin,et al.  An integrated experimental and numerical study of forward–curved centrifugal fan , 2002 .

[2]  Durmus Kaya.  Experimental study on regaining the tangential velocity energy of axial flow pump , 2003 .

[3]  Oscar Barambones,et al.  A robust vector control for induction motor drives with an adaptive sliding-mode control law , 2011, J. Frankl. Inst..

[4]  D. F. Warne,et al.  Newnes Electrical Power Engineer's Handbook , 2000 .

[5]  G. Scelba,et al.  Efficiency optimization techniques via constant optimal slip control of induction motor drives , 2006, International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006..

[6]  Semyon G. Rabinovich,et al.  Measurement Errors and Uncertainties: Theory and Practice , 1999 .

[7]  Paula Fonseca,et al.  Energy-efficient motor systems in the industrial and in the services sectors in the European Union: characterisation, potentials, barriers and policies , 2003 .

[8]  H. Dalvand,et al.  Techno-Economic Evaluation of Energy Efficiency Measures in Iranian Industrial 3-Phase Electric Motors , 2006, 2006 IEEE International Power and Energy Conference.

[9]  Keli Shi.  Intelligent control for an induction motor , 2001 .

[10]  Diego Zappa,et al.  ISO 5725 and GUM: comparison and comments , 2009 .

[11]  Andrzej M. Trzynadlowski,et al.  Control of Induction Motors , 2000 .

[12]  Dong Hwa Kim,et al.  Loss Minimization Control of Induction Motor Using GA-PSO , 2005, KES.

[13]  Bertil Magnusson,et al.  Understanding the meaning of accuracy, trueness and precision , 2007 .

[14]  Paolo Valigi,et al.  Adaptive nonlinear control of induction motors via extended matching , 1991 .

[15]  Cenk Celik,et al.  Energy Efficiency in Pumps , 2008, Energy Management and Energy Efficiency in Industry.

[16]  S. Baskar,et al.  A novel efficiency improvement measure in three-phase induction motors, its conservation potential and economic analysis , 2008 .

[17]  Bimal K. Bose,et al.  Power Electronics and Motor Drives: Advances and Trends , 2006 .

[18]  M.N. Uddin,et al.  Model-Based Loss Minimization Control of an Induction Motor Drive , 2006, 2006 IEEE International Symposium on Industrial Electronics.

[19]  Rahman Saidur,et al.  A review on electrical motors energy use and energy savings , 2010 .

[20]  Alistair B. Forbes,et al.  Advanced Mathematical and Computational Tools in Metrology and Testing: AMCTM VIII , 2009 .

[21]  A. R. Ganji,et al.  Introduction to Engineering Experimentation , 1995 .

[22]  Haji Hassan Masjuki,et al.  Theory of energy efficiency standards and labels , 2002 .

[23]  Emmanuel B. Agamloh.  The repeatability of IEEE standard 112B induction motor efficiency tests , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[24]  Tze-Fun Chan,et al.  Applied Intelligent Control of Induction Motor Drives , 2011 .

[25]  Stan Shiels.  Locating the greatest centrifugal pump energy savings , 2004 .

[26]  Teuku Meurah Indra Mahlia,et al.  Considerations for the selection of an applicable energy efficiency test procedure for electric motors in Malaysia: Lessons for other developing countries , 2009 .

[27]  A. Binder,et al.  Evaluation of different measurement methods to determine stray load losses in induction machines , 2006, International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006..

[28]  Patrick F. Dunn,et al.  Measurement and Data Analysis for Engineering and Science , 2017 .

[29]  Ieee Standards Board.  IEEE standard test procedure for polyphase induction motors and generators , 1992 .

[30]  James E. McMahon,et al.  Governments should implement energy-efficiency standards and labels--cautiously , 2003 .

[31]  Kerstin Fink.  Knowledge Potential Measurement and Uncertainty , 2004 .

[32]  Wenping Cao,et al.  Comparison of IEEE 112 and New IEC Standard 60034-2-1 , 2008, IEEE Transactions on Energy Conversion.

[33]  S. Paramasivam,et al.  Development of torque and flux ripple minimization algorithm for direct torque control of induction motor drive , 2006 .

[34]  X. Roboam,et al.  Energy optimization of induction motor drives , 2004, 2004 IEEE International Conference on Industrial Technology, 2004. IEEE ICIT '04..

[35]  S. Sujitjorn,et al.  Numerical approach to loss minimization in an induction motor , 2004 .

[36]  Sadegh Vaez-Zadeh,et al.  A CONTINUOUS EFFICIENCY OPTIMIZATION CONTROLLER FOR INDUCTION MOTOR DRIVES , 2005 .

[37]  W. Kessel,et al.  Measurement uncertainty according to ISO/BIPM-GUM , 2002 .

[38]  Leopoldo Angrisani,et al.  Unscented transform: a powerful tool for measurement uncertainty evaluation , 2005, IEEE Transactions on Instrumentation and Measurement.

[39]  Antero Arkkio,et al.  Electromechanical interaction in rotordynamics of cage induction motors , 2005 .

[40]  Badrul H. Chowdhury,et al.  Sensorless control of inverter-fed induction motor drives , 2007 .

[41]  Pierre Rouchon,et al.  Industrial sensorless control of induction motors , 2001 .

[42]  S. Lim,et al.  Loss-minimising control scheme for induction motors , 2004 .

[43]  Wang Huangang,et al.  Variable-structure torque control of induction motors using space vector modulation , 2005 .

[44]  A.K. Wallace,et al.  Motor efficiency determination: from testing laboratory to plant installation , 1999, Conference Record of 1999 Annual Pulp and Paper Industry Technical Conference (Cat. No.99CH36338).

[45]  M. A. Saidel,et al.  Assessment and optimization of induction electric motors aiming energy efficiency in industrial applications , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[46]  J. Fraden,et al.  Handbook of Modern Sensors: Physics, Designs, and Applications, 2nd ed. , 1998 .

[47]  S. Standard.  GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT , 2006 .

[48]  Hazem N. Nounou,et al.  Application of adaptive fuzzy control to ac machines , 2007, Appl. Soft Comput..