A scalable electrodeposition route to the low-cost, versatile and controllable fabrication of perovskite solar cells

Abstract Hybrid organic/inorganic perovskite solar cells (PSCs) have emerged as a highly promising alternative renewable energy source because of their high efficiency and low-cost solution processable manufacturing technology. However, the commonly used spin coating process limits the large-scale manufacturing of perovskite layers for commercialization. Here we report on the development of an electrodeposition technique for fabricating perovskite layers and demonstrate its simplicity, versatility, scalability and roll-to-roll manufacturing compatibility. The key step is the electrodeposition of a PbO 2 layer on TiO 2 scaffold, which is then subjected to chemical bath conversion to sequentially generate PbI 2 and CH 3 NH 3 PbI 3 perovskite. Clearly demonstrated is the controllability of morphology and optical properties of the CH 3 NH 3 PbI 3 layer, leading to a higher power conversion efficiency (PCE) reproducibility and a higher average PCE when incorporated into carbon-based PSCs than with the spin coating technique. Remarkably, the cell area of electrodeposited PSCs could be easily scaled up to 4 cm 2 with an excellent perovskite film uniformity, rendering a PCE gain of 36.3% over the spin-coated counterpart. We further demonstrate the deposition of perovskite layers on complex shape substrates (e.g., stainless steel net), which would be rather difficult or impossible with other competing film deposition techniques. These results establish electrodeposition as a versatile and controllable route toward low-cost and large scalable manufacturing of high efficiency PSCs.