Coupled mechanical-electrical-thermal modeling for short-circuit prediction in a lithium-ion cell under mechanical abuse
暂无分享,去创建一个
Chao Zhang | Shriram Santhanagopalan | Ahmad Pesaran | Michael A. Sprague | A. Pesaran | Chao Zhang | S. Santhanagopalan | M. Sprague
[1] Alejandro A. Franco,et al. Multiscale modelling and numerical simulation of rechargeable lithium ion batteries: concepts, methods and challenges , 2013 .
[2] T. Wierzbicki,et al. Calibration and finite element simulation of pouch lithium-ion batteries for mechanical integrity , 2012 .
[3] Partha P. Mukherjee,et al. Stochastic Analysis of Diffusion Induced Damage in Lithium-Ion Battery Electrodes , 2013 .
[4] Shriram Santhanagopalan,et al. Multi-Domain Modeling of Lithium-Ion Batteries Encompassing Multi-Physics in Varied Length Scales , 2011 .
[5] T. Wierzbicki,et al. Characterizing and modeling mechanical properties and onset of short circuit for three types of lithium-ion pouch cells , 2014 .
[6] Robert J. Kee,et al. A Computational Model of the Mechanical Behavior within Reconstructed LixCoO2 Li-ion Battery Cathode Particles , 2014 .
[7] T. Wierzbicki,et al. Homogenized mechanical properties for the jellyroll of cylindrical Lithium-ion cells , 2013 .
[8] P. Ramadass,et al. Study of internal short in a Li-ion cell-II. Numerical investigation using a 3D electrochemical-thermal model , 2014 .
[9] Song-Yul Choe,et al. Modeling, validation and analysis of mechanical stress generation and dimension changes of a pouch type high power Li-ion battery , 2013 .
[10] Lars Greve,et al. Mechanical testing and macro-mechanical finite element simulation of the deformation, fracture, and short circuit initiation of cylindrical Lithium ion battery cells , 2012 .
[11] Xiaosong Huang,et al. A multi-scale approach for the stress analysis of polymeric separators in a lithium-ion battery , 2010 .
[12] M. Doyle,et al. Simulation and Optimization of the Dual Lithium Ion Insertion Cell , 1994 .
[13] Xiaosong Huang,et al. Modeling stresses in the separator of a pouch lithium-ion cell , 2011 .
[14] Kurt Maute,et al. Numerical modeling of electrochemical-mechanical interactions in lithium polymer batteries , 2009 .
[15] T. Wierzbicki,et al. Modeling and short circuit detection of 18650 Li-ion cells under mechanical abuse conditions , 2012 .
[16] P. Ramadass,et al. Study of internal short in a Li-ion cell I. Test method development using infra-red imaging technique , 2014 .
[17] Gi-Heon Kim,et al. A three-dimensional multi-physics model for a Li-ion battery , 2013 .
[18] P. Ramadass,et al. Analysis of internal short-circuit in a lithium ion cell , 2009 .
[19] Xiaosong Huang,et al. A multiphysics model for the in situ stress analysis of the separator in a lithium-ion battery cell , 2014 .
[20] K. Smith,et al. Evidence for Anisotropic Mechanical Behavior and Nanoscale Chemical Heterogeneity in Cycled LiCoO2 , 2014 .
[21] W. Shyy,et al. Numerical Simulation of Intercalation-Induced Stress in Li-Ion Battery Electrode Particles , 2007 .
[22] E. Thornton. Thermal structures - Four decades of progress , 1990 .
[23] Craig B. Arnold,et al. A Model for the Behavior of Battery Separators in Compression at Different Strain/Charge Rates , 2014 .
[24] W. Lai,et al. Mechanical behavior of representative volume elements of lithium-ion battery cells under compressive loading conditions , 2014 .
[25] Craig B. Arnold,et al. Mechanical Properties of a Battery Separator under Compression and Tension , 2014 .
[26] G. G. Stokes. "J." , 1890, The New Yale Book of Quotations.
[27] Jung-Hoon Song,et al. Numerical modeling and experimental validation of pouch-type lithium-ion battery , 2014, Journal of Applied Electrochemistry.
[28] Wei Shyy,et al. Intercalation-Induced Stress and Heat Generation within Single Lithium-Ion Battery Cathode Particles , 2008 .