Multivariate calibration transfer between two different types of multisensor systems

Abstract The most popular sensors in multisensor systems (electronic tongues) are voltammetric and potentiometric ones. Practical application of multisensor systems for evaluation of particular target parameters requires calibration step. Even if both types of sensors (voltammetric and potentiometric) can be sensitive towards the same parameter of an analyte and can be used for its quantification, corresponding multisensor systems cannot operate in the framework of a single unified calibration model interpreting the responses of both systems. This research is dedicated to experimental verification of calibration transfer feasibility between voltammetric and potentiometric multisensor systems. The algorithm of direct standardization suggested earlier in spectroscopy was applied for transformation of potentiometric data into voltammetric format, and vice versa. Such transformations allowed for interpretation of a system response by multivariate regression model built employing the data from another type of multisensor system. For example, concentration of the tartaric acid in the grape musts can be determined with the regression model developed for voltammetric system using the data obtained from potentiometric system. Only 20% decrease in precision was observed for the converted potentiometric data compared to initial voltammetric model.

[1]  M. del Valle,et al.  Determination of total polyphenol index in wines employing a voltammetric electronic tongue. , 2012, Analytica chimica acta.

[2]  Constantin Apetrei,et al.  Fish Freshness Monitoring Using an E-Tongue Based on Polypyrrole Modified Screen-Printed Electrodes , 2013, IEEE Sensors Journal.

[3]  Li Wang,et al.  Assessment of Taste Attributes of Peanut Meal Enzymatic-Hydrolysis Hydrolysates Using an Electronic Tongue , 2015, Sensors.

[4]  Dmitry Kirsanov,et al.  Developing Sensing Materials for Multisensor Systems on the Basis of Extraction Data , 2014 .

[5]  Manel del Valle,et al.  Evaluation of red wines antioxidant capacity by means of a voltammetric e-tongue with an optimized sensor array , 2014 .

[6]  Lars Nørgaard,et al.  Direct standardisation in multi wavelength fluorescence spectroscopy , 1995 .

[7]  B. Kowalski,et al.  Multivariate instrument standardization , 1991 .

[8]  Hilko van der Voet,et al.  Comparing the predictive accuracy of models using a simple randomization test , 1994 .

[9]  Jiewen Zhao,et al.  Determination of caffeine content and main catechins contents in green tea (Camellia sinensis L.) using taste sensor technique and multivariate calibration. , 2010 .

[10]  F. Xavier Rius,et al.  Multivariate standardization for correcting the ionic strength variation on potentiometric sensor arrays , 2000 .

[11]  A Herrero,et al.  Modelling the matrix interference of iron in the multivariate determination of copper by stripping voltammetry Instrument standardization. , 1999, Talanta.

[12]  A. Legin,et al.  Towards reliable estimation of an "electronic tongue" predictive ability from PLS regression models in wine analysis. , 2012, Talanta.

[13]  Alisa Rudnitskaya,et al.  Electronic tongue for quality assessment of ethanol, vodka and eau-de-vie , 2005 .

[14]  Paolo Oliveri,et al.  Chemometric brains for artificial tongues. , 2010, Advances in food and nutrition research.

[15]  F. X. Rius,et al.  Multivariate standardization techniques on ion-selective sensor arrays , 1999 .

[16]  M. P. Callao,et al.  Multivariate standardization techniques using UV-Vis data , 1997 .

[17]  M. C. Ortiz,et al.  Piecewise Direct Standardization Method Applied to the Simultaneous Determination of Pb(II), Sn(IV) and Cd(II) by Differential Pulse Polarography , 1998 .

[18]  L. A. Stone,et al.  Computer Aided Design of Experiments , 1969 .

[19]  Constantin Apetrei,et al.  Monitoring of evolution during red wine aging in oak barrels and alternative method by means of an electronic panel test , 2012 .

[20]  M. Valle Electronic Tongues Employing Electrochemical Sensors , 2010 .

[21]  A. C. Veloso,et al.  Evaluation of healthy and sensory indexes of sweetened beverages using an electronic tongue. , 2014, Analytica chimica acta.

[22]  Zhenbo Wei,et al.  Tracing floral and geographical origins of honeys by potentiometric and voltammetric electronic tongue , 2014 .

[23]  J. Shenk,et al.  New Standardization and Calibration Procedures for Nirs Analytical Systems , 1991 .

[24]  Manel del Valle,et al.  Instrumental measurement of wine sensory descriptors using a voltammetric electronic tongue , 2015 .

[25]  M. C. Ortiz,et al.  Multivariate calibration transfer applied to the routine polarographic determination of copper, lead, cadmium and zinc , 1997 .

[26]  B. Kowalski,et al.  Partial least-squares regression: a tutorial , 1986 .

[27]  M. Valle,et al.  Quantitative Analysis of Active Pharmaceutical Ingredients (APIs) Using a Potentiometric Electronic Tongue in a SIA Flow System , 2016 .

[28]  J. Saja,et al.  Analysis of organic acids and phenols of interest in the wine industry using Langmuir-Blodgett films based on functionalized nanoparticles. , 2015, Analytica chimica acta.

[29]  Patrycja Ciosek,et al.  Evaluation of organoleptic and texture properties of dried apples by hybrid electronic tongue , 2013 .

[30]  Paul Geladi,et al.  Principal Component Analysis , 1987, Comprehensive Chemometrics.

[31]  Vladislav Galyanin,et al.  Building global models for fat and total protein content in raw milk based on historical spectroscopic data in the visible and short-wave near infrared range. , 2016, Food chemistry.

[32]  M. C. Ortiz,et al.  Modelling the background current with partial least squares regression and transference of the calibration models in the simultaneous determination of Tl and Pb by stripping voltammetry. , 1998, Talanta.