Modeling of hydrogen production with a stand-alone renewable hybrid power system

Hydrocarbon resources adequately meet today’s energy demands. Due to the environmental impacts, renewable energy sources are high in the agenda. As an energy carrier, hydrogen is considered one of the most promising fuels for its high energy density as compared to hydrocarbon fuels. Therefore, hydrogen has a significant and future use as a sustainable energy system. Conventional methods of hydrogen extraction require heat or electrical energy. The main source of hydrogen is water, but hydrogen extraction from water requires electrical energy. Electricity produced from renewable energy sources has a potential for hydrogen production systems. In this study, an electrolyzer using the electrical energy from the renewable energy system is used to describe a model, which is based on fundamental thermodynamics and empirical electrochemical relationships. In this study, hydrogen production capacity of a stand-alone renewable hybrid power system is evaluated. Results of the proposed model are calculated and compared with experimental data. The MATLAB/Simscape® model is applied to a stand-alone photovoltaic-wind power system sited in Istanbul, Turkey.

[1]  Chia-Yon Chen,et al.  Technology forecasting and patent strategy of hydrogen energy and fuel cell technologies , 2011 .

[2]  Xianguo Li Principles of fuel cells , 2005 .

[3]  Dennis Y.C. Leung,et al.  Parametric study of solid oxide steam electrolyzer for hydrogen production , 2007 .

[4]  Ping Zhang,et al.  Overview of nuclear hydrogen production research through iodine sulfur process at INET , 2010 .

[5]  Thomas Ackermann,et al.  Wind Power in Power Systems , 2005 .

[6]  Antonino S. Aricò,et al.  Optimization of components and assembling in a PEM electrolyzer stack , 2011 .

[7]  Qi Li,et al.  Seeker optimization algorithm for global optimization: A case study on optimal modelling of proton exchange membrane fuel cell (PEMFC) , 2011 .

[8]  Luis M. Fernández,et al.  Operating capability as a PQ/PV node of a direct-drive wind turbine based on a permanent magnet synchronous generator , 2010 .

[9]  T. Razykov,et al.  Solar photovoltaic electricity: Current status and future prospects , 2011 .

[10]  M. Santarelli,et al.  Theoretical model and experimental analysis of a high pressure PEM water electrolyser for hydrogen production , 2009 .

[11]  G. Prentice,et al.  Electrochemical Engineering Principles , 1990 .

[12]  R. H. Newnham,et al.  New operational strategies for gelled-electrolyte lead/acid batteries , 1996 .

[13]  M. J. Khan,et al.  Dynamic modeling and simulation of a small wind–fuel cell hybrid energy system , 2005 .

[14]  Jan Pierik,et al.  Inertial response of variable speed wind turbines , 2006 .

[15]  A. Friedl,et al.  Renewable hydrogen production: a technical evaluation based on process simulation , 2010 .

[16]  Joel Martinez-Frias,et al.  A natural gas-assisted steam electrolyzer for high-efficiency production of hydrogen , 2003 .

[17]  Alvaro Luna,et al.  Modeling of a variable speed wind turbine with a Permanent Magnet Synchronous Generator , 2009, 2009 IEEE International Symposium on Industrial Electronics.

[18]  Rachid Ibtiouen,et al.  Sizing optimization of grid-independent hybrid photovoltaic/wind power generation system , 2011 .

[19]  Chih-Chiang Hua,et al.  Study of maximum power tracking techniques and control of DC/DC converters for photovoltaic power system , 1998, PESC 98 Record. 29th Annual IEEE Power Electronics Specialists Conference (Cat. No.98CH36196).

[20]  Ø. Ulleberg Modeling of advanced alkaline electrolyzers: a system simulation approach , 2003 .

[21]  A. Kucernak,et al.  Analysis of the electrical and mechanical time response of solid polymer–platinum composite membranes , 2001 .

[22]  J. A. Carta,et al.  A continuous bivariate model for wind power density and wind turbine energy output estimations , 2007 .

[23]  Huan-Liang Tsai,et al.  Accuracy improvement of practical PV model , 2010, Proceedings of SICE Annual Conference 2010.

[24]  H. Gorgun Dynamic modelling of a proton exchange membrane (PEM) electrolyzer , 2006 .

[25]  Frano Barbir,et al.  PEM Fuel Cells: Theory and Practice , 2012 .

[26]  F. Barbir,et al.  Initiation of hydrogen energy system in developing countries , 1992 .

[27]  Erkan Dursun,et al.  A mobile renewable house using PV/wind/fuel cell hybrid power system , 2011 .

[28]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[29]  Caisheng Wang,et al.  Unit sizing and cost analysis of stand-alone hybrid wind/PV/fuel cell power generation systems , 2006 .

[30]  D. Bessarabov,et al.  A simple model for solid polymer electrolyte (SPE) water electrolysis , 2004 .

[31]  David Harrison,et al.  A review of the latest developments in electrodes for unitised regenerative polymer electrolyte fuel cells , 2006 .

[32]  Jenn-Jiang Hwang,et al.  Dynamic modeling of a photovoltaic hydrogen fuel cell hybrid system , 2009 .

[33]  Ahmad Zahedi,et al.  Maximizing solar PV energy penetration using energy storage technology , 2011 .

[34]  Furkan Dincer,et al.  A review of the factors affecting operation and efficiency of photovoltaic based electricity generation systems , 2011 .

[35]  K. Ebihara,et al.  Estimation of equivalent circuit parameters of PV module and its application to optimal operation of PV system , 2001 .

[36]  S.W.H. de Haan,et al.  Optimal energy management strategy and system sizing method for stand-alone photovoltaic-hydrogen systems , 2008 .

[37]  F. Barbir PEM electrolysis for production of hydrogen from renewable energy sources , 2005 .

[38]  Mohammad S. Alam,et al.  Dynamic modeling, design and simulation of a wind/fuel cell/ultra-capacitor-based hybrid power generation system , 2006 .

[39]  F. Mueller-Langer,et al.  Techno-economic assessment of hydrogen production processes for the hydrogen economy for the short and medium term , 2007 .

[40]  Guangyi Cao,et al.  Dynamic modeling and sizing optimization of stand-alone photovoltaic power systems using hybrid energy storage technology , 2009 .

[41]  Anna G. Stefanopoulou,et al.  Control of Fuel Cell Power Systems: Principles, Modeling, Analysis and Feedback Design , 2004 .

[42]  G. Zeng,et al.  Effective hydrogen production using waste sludge and its filtrate , 2010 .

[43]  Fernando D. Bianchi,et al.  Wind Turbine Control Systems: Principles, Modelling and Gain Scheduling Design , 2006 .

[44]  G. Demirer,et al.  Effects of pretreatment methods on solubilization of beet-pulp and bio-hydrogen production yield , 2011 .

[45]  Xavier Roboam,et al.  Hybrid solar–wind system with battery storage operating in grid-connected and standalone mode: Control and energy management – Experimental investigation , 2010 .