Design of Planar Artificial Magnetic Conductor Ground Plane Using Frequency-Selective Surfaces for Frequencies Below 1 GHz
暂无分享,去创建一个
[1] Klaus Finkenzeller,et al. RFID Handbook: Radio-Frequency Identification Fundamentals and Applications , 2000 .
[2] J. Vardaxoglou. Frequency Selective Surfaces: Analysis and Design , 1997 .
[3] N. Engheta,et al. High impedance metamaterial surfaces using Hilbert-curve inclusions , 2004, IEEE Microwave and Wireless Components Letters.
[4] Michael J. Withford,et al. Prototyping dual-band artificial magnetic conductors with laser micromachining , 2006 .
[5] D. Sievenpiper,et al. High-impedance electromagnetic surfaces with a forbidden frequency band , 1999 .
[6] G. Manara,et al. Synthesis of artificial magnetic conductors by using multilayered frequency selective surfaces , 2002, IEEE Antennas and Wireless Propagation Letters.
[7] Diana Twede,et al. Radio frequency identification (RFID) performance: the effect of tag orientation and package contents , 2006 .
[8] Heung-Sik Tae,et al. Comparative Study on Various Artficial Magnetic Conductors for Low-Profile Antenna , 2006 .
[9] D. Werner,et al. The design synthesis of multiband artificial magnetic conductors using high impedance frequency selective surfaces , 2005, IEEE Transactions on Antennas and Propagation.
[10] Daniel M. Dobkin,et al. Environmental Effects on RFID Tag Antennas , 2005, IEEE MTT-S International Microwave Symposium Digest, 2005..
[11] K. Sarabandi,et al. Antenna miniaturization and bandwidth enhancement using a reactive impedance substrate , 2004, IEEE Transactions on Antennas and Propagation.
[12] T. Itoh,et al. A novel composite right-/left-handed coupled-line directional coupler with arbitrary coupling level and broad bandwidth , 2004, IEEE Transactions on Microwave Theory and Techniques.
[13] R. Mittra,et al. Techniques for analyzing frequency selective surfaces-a review , 1988, Proc. IEEE.
[14] Y. Rahmat-Samii,et al. Reflection phase characterizations of the EBG ground plane for low profile wire antenna applications , 2003 .
[15] A. Hoorfar,et al. Small dipole-antenna near Peano high-impedance surfaces , 2004, IEEE Antennas and Propagation Society Symposium, 2004..
[16] P.L. Werner,et al. A novel design technique for ultra-thin tunable EBG AMC surfaces , 2004, IEEE Antennas and Propagation Society Symposium, 2004..
[17] Fan Yang,et al. Electromagnetic Band Gap Structures in Antenna Engineering , 2008 .
[18] J. Vardaxoglou,et al. Artificial magnetic conductor surfaces and their application to low-profile high-gain planar antennas , 2005, IEEE Transactions on Antennas and Propagation.
[19] L. Akhoondzadeh-Asl,et al. Wideband Dipoles on Electromagnetic Bandgap Ground Planes , 2007 .
[20] Bo Gao,et al. Low Cost Passive UHF RFID Packaging with Electromagnetic Band Gap (EBG) Substrate for Metal Objects , 2007, 2007 Proceedings 57th Electronic Components and Technology Conference.
[21] G. Goussetis,et al. Tailoring the AMC and EBG characteristics of periodic metallic arrays printed on grounded dielectric substrate , 2006, IEEE Transactions on Antennas and Propagation.
[22] P. Nikitin,et al. Antenna design for UHF RFID tags: a review and a practical application , 2005, IEEE Transactions on Antennas and Propagation.
[23] G. Poilasne. Antennas on High Impedance Ground Planes: on the Importance of the Antenna Isolation , 2003 .
[24] Tatsuo Itoh,et al. A uniplanar compact photonic-bandgap (UC-PBG) structure and its applications for microwave circuit , 1999 .
[25] H. Yang,et al. Radiation Characteristics of a Microstrip Patch Over an Electromagnetic Bandgap Surface , 2007, IEEE Transactions on Antennas and Propagation.
[26] M. Hakkak,et al. Design of a novel AMC with little sensitivity to the angle of incidence and very compact size , 2006, 2006 IEEE Antennas and Propagation Society International Symposium.
[27] Werner Wiesbeck,et al. Patch array as artificial magnetic conductors for antenna gain improvement , 2002 .