Effect of graph generation on slope stability analysis based on graph theory

Abstract Limit equilibrium method (LEM) and strength reduction method (SRM) are the most widely used methods for slope stability analysis. However, it can be noted that they both have some limitations in practical application. In the LEM, the constitutive model cannot be considered and many assumptions are needed between slices of soil/rock. The SRM requires iterative calculations and does not give the slip surface directly. A method for slope stability analysis based on the graph theory is recently developed to directly calculate the minimum safety factor and potential critical slip surface according to the stress results of numerical simulation. The method is based on current stress state and can overcome the disadvantages mentioned above in the two traditional methods. The influences of edge generation and mesh geometry on the position of slip surface and the safety factor of slope are studied, in which a new method for edge generation is proposed, and reasonable mesh size is suggested. The results of benchmark examples and a rock slope show good accuracy and efficiency of the presented method.

[1]  Xiaosong Tang,et al.  Strength reduction and step-loading finite element approaches in geotechnical engineering , 2009 .

[2]  R. Bellman.  Dynamic programming. , 1957, Science.

[3]  J. A. Bondy,et al.  Graph Theory with Applications , 1978 .

[4]  Zheng Wen-b.  Graph theory for stability analysis of rock/soil slopes based on numerical manifold method , 2013 .

[5]  I. B. Donald,et al.  The ACADS slope stability programs review , 1995 .

[6]  A. Drescher,et al.  Slope stability analysis by strength reduction , 1999 .

[7]  Zhou Jia-wen.  Stability analysis of slope under the condition of rainfall infiltration , 2008 .

[8]  Xiurun Ge,et al.  Slope stability analysis under seismic load by vector sum analysis method , 2011 .

[9]  Feng Qiang.  ON DEFINITIONS OF SAFETY FACTOR OF SLOPE STABILITY ANALYSIS WITH FINITE ELEMENT METHOD , 2005 .

[10]  Zhang Zong-liang.  Slope stability analysis of limit equilibrium finite element method based on the Dijkstra algorithm , 2007 .

[11]  D. J. Naylor,et al.  Safety analysis using finite elements , 1998 .

[12]  Mowen Xie,et al.  Three-dimensional critical slip surface locating and slope stability assessment for lava lobe of Unzen volcano , 2011 .

[13]  S. K. Sarma,et al.  Determination of critical slip surface in slope analysis , 2006 .

[14]  Andrew V. Goldberg,et al.  Shortest paths algorithms: Theory and experimental evaluation , 1994, SODA '94.

[15]  Chaoshui Xu,et al.  Chart-Based Slope Stability Assessment Using the Generalized Hoek–Brown Criterion , 2013, The Hoek-Brown Failure criterion—From theory to application.

[16]  J. Y. Kim,et al.  An improved search strategy for the critical slip surface using finite element stress fields , 1997 .

[17]  Chuangbing Zhou,et al.  A generalized multi-field coupling approach and its application to stability and deformation control of a high slope , 2011 .

[18]  Zhou Ding-heng.  Rock Slope Stability Analysis Based on Meshless Method and Shortest Path Algorithm , 2008 .

[19]  Jia-wen Zhou,et al.  A Slope Stability Analysis Method Combined with Limit Equilibrium and Finite Element Simulation , 2012 .