Spectral Correction for the Effect of Crown Shape at the Single-Tree Level: An Approach Using a Lidar-Derived Digital Surface Model for Broad-Leaved Canopy

The spectral response of a single tree on remotely sensed images may be affected by the crown shape, yielding brighter sun-facing sides and darker sides facing away from the sun. To correct this crown-shape effect, we assumed that the roughness of the canopy surface within a single crown resembles the topography of the land surface, in the case of a closed upper-canopy layer (i.e., canopy surface) of broad-leaved deciduous trees. Previous topographic normalizations have proved to be useful in correcting the effect of rugged terrain at a large-landscape scale. However, are they also useful in correcting the rough canopy surface at the scale of a single crown? We applied conventional topographic corrections (cosine, Minnaert, and C) to a canopy surface model (CSM) of 66 trees, which was derived from airborne small-footprint Lidar data. The 12-band spectral data of each tree were acquired from the aircraft with 0.5-m spatial resolution and analyzed to validate the corrections. Among the tested methods, the C correction was the most successful in applying to the CSM, whereas the Minnaert and cosine corrections yielded errors in the reflectance of some steep canopy surfaces. We assessed the spectral feature of each tree in terms of tree vigor, by using the vegetation index employing the red-edge (700 nm) and green (541 nm) bands. Following the correction, the overall accuracy was improved from 75.5% to 84.5%. Thus, we suggest that the effect of crown shape be carefully considered and corrected in single-crown-level analyses of remotely sensed spectra.

[1]  Ryan L. Johnsonl,et al.  A Modeled-Based Sub-Pixel Scale Mountain Terrain Normalization Algorithm for Improved LAI Estimation from Airborne CASI Imagery , 2007 .

[2]  A. Strahler,et al.  Geometric-Optical Modeling of a Conifer Forest Canopy , 1985, IEEE Transactions on Geoscience and Remote Sensing.

[3]  Klaus I. Itten,et al.  Geometric and radiometric correction of TM data of mountainous forested areas , 1993, IEEE Trans. Geosci. Remote. Sens..

[4]  P.J. Zarco-Tejada,et al.  Canopy optical indices from infinite reflectance and canopy reflectance models for forest condition monitoring: application to hyperspectral CASI data , 1999, IEEE 1999 International Geoscience and Remote Sensing Symposium. IGARSS'99 (Cat. No.99CH36293).

[5]  Alan R. Gillespie,et al.  Interpretation and topographic compensation of conifer canopy self-shadowing , 2008 .

[6]  C. Conese.  Topographic normalization of TM scenes through the use of an atmospheric correction method and digital terrain model , 1993 .

[7]  T. Tokola,et al.  Use of topographic correction in Landsat TM-based forest interpretation in Nepal , 2001 .

[8]  Craig A. Coburn,et al.  SCS+C: a modified Sun-canopy-sensor topographic correction in forested terrain , 2005, IEEE Transactions on Geoscience and Remote Sensing.

[9]  S. Ekstrand,et al.  Landsat TM-based forest damage assessment : correction for topographic effects , 1996 .

[10]  Pablo J. Zarco-Tejada,et al.  Chlorophyll fluorescence effects on vegetation apparent reflectance: II. laboratory and airborne canopy-level measurements with hyperspectral data. , 2000 .

[11]  A. Gillespie,et al.  Topographic Normalization of Landsat TM Images of Forest Based on Subpixel Sun–Canopy–Sensor Geometry , 1998 .

[12]  F. Hall,et al.  Improved topographic correction of forest image data using a 3‐D canopy reflectance model in multiple forward mode , 2008 .

[13]  D. Civco.  Topographic normalization of landsat thematic mapper digital imagery , 1989 .

[14]  E. Næsset,et al.  Single Tree Segmentation Using Airborne Laser Scanner Data in a Structurally Heterogeneous Spruce Forest , 2006 .

[15]  Raymond L. Czaplewski,et al.  Accuracy assessment of maps of forest condition: Statistical design and methodological considerations [Chapter 5] , 2003 .

[16]  Russell G. Congalton,et al.  Assessing the accuracy of remotely sensed data : principles and practices , 1998 .

[17]  David Riaño,et al.  Assessment of different topographic corrections in Landsat-TM data for mapping vegetation types (2003) , 2003, IEEE Trans. Geosci. Remote. Sens..

[18]  Alan R. Gillespie,et al.  A statistical approach for topographic correction of satellite images by using spatial context information , 1999, IEEE Trans. Geosci. Remote. Sens..

[19]  J. Colby,et al.  Topographic Normalization in Rugged Terrain , 1991 .

[20]  A. Strahler,et al.  Geometric-Optical Bidirectional Reflectance Modeling of a Conifer Forest Canopy , 1986, IEEE Transactions on Geoscience and Remote Sensing.

[21]  Glenn J. Fitzgerald,et al.  Multiple shadow fractions in spectral mixture analysis of a cotton canopy , 2005 .

[22]  S. Sandmeier,et al.  Radiometric corrections of topographically induced effects on Landsat TM data in an alpine environment , 1993 .

[23]  P. Birnbaum.  Canopy surface topography in a French Guiana forest and the folded forest theory , 2001, Plant Ecology.

[24]  Geoffrey J. Hay,et al.  Development of a pit filling algorithm for LiDAR canopy height models , 2009, Comput. Geosci..

[25]  T. Lin,et al.  The Lambertian assumption and Landsat data. , 1980 .

[26]  Shoko Kobayashi,et al.  The integrated radiometric correction of optical remote sensing imageries , 2008 .

[27]  S. Ustin,et al.  Using AVIRIS data and multiple-masking techniques to map urban forest tree species , 2004 .

[28]  J. Colwell.  Vegetation canopy reflectance , 1974 .

[29]  Janet Franklin,et al.  The application of a geometric optical canopy reflectance model to semiarid shrub vegetation , 1992, IEEE Trans. Geosci. Remote. Sens..

[30]  C. Woodcock,et al.  A hybrid geometric optical-radiative transfer approach for modeling albedo and directional reflectance of discontinuous canopies , 1995 .

[31]  Sucharita Gopal,et al.  Fuzzy set theory and thematic maps: accuracy assessment and area estimation , 2000, Int. J. Geogr. Inf. Sci..

[32]  Alan H. Strahler,et al.  A hybrid geometric optical-radiative transfer approach for modeling albedo and directional reflectance of discontinuous canopies , 1995, IEEE Transactions on Geoscience and Remote Sensing.

[33]  Marco Ferretti,et al.  Forest Health Assessment and Monitoring – Issues for Consideration , 1997 .

[34]  P. Teillet,et al.  On the Slope-Aspect Correction of Multispectral Scanner Data , 1982 .

[35]  P. Gong,et al.  Reduction of atmospheric and topographic effect on Landsat TM data for forest classification , 2008 .

[36]  Alan H. Strahler,et al.  Geometric-optical bidirectional reflectance modeling of the discrete crown vegetation canopy: effect of crown shape and mutual shadowing , 1992, IEEE Trans. Geosci. Remote. Sens..

[37]  Darius S. Culvenor,et al.  Extracting Individual Tree Information , 2003 .