A novel application of frequency selective surface in dual-band WLAN antenna

In this paper, combined elements method is introduced to achieve dual stop-band frequency selective surface (FSS). Later, a dual-band WLAN antenna is designed and the centre frequency is at 2.4GHz and 5.4GHz which accord with the FSS in this paper. We use FSS as dual-band WLAN antenna's reflection plan to improve the performance of antenna. The analysis and results of antenna and FSS are given. The results show that antenna's gain can be improved after the FSS is placed as the reflection plane. This is a new research area which have great prospect in the design of antenna combined with FSS.

[1]  D. Pozar Microstrip antenna aperture-coupled to a microstripline , 1985 .

[2]  Y. Chan,et al.  Analysis of frequency-selective surfaces on a biased ferrite substrate , 1995 .

[3]  Xin Lv,et al.  A NOVEL DUALBAND FREQUENCY SELECTIVE SURFACE WITH PERIODIC CELL PERTURBATION , 2008 .

[4]  Jen-Yea Jan,et al.  Planar monopole antennas for 2.4/5.2 GHz dual-band application , 2003, IEEE Antennas and Propagation Society International Symposium. Digest. Held in conjunction with: USNC/CNC/URSI North American Radio Sci. Meeting (Cat. No.03CH37450).

[5]  Wei Hong,et al.  Frequency-selective surfaces with two sharp sidebands realised by cascading and shunting substrate integrated waveguide cavities , 2008 .

[6]  Moreira,et al.  Microstrip fractal antennas for multistandard terminals , 2004, IEEE Antennas and Wireless Propagation Letters.

[7]  Raj Mittra,et al.  Frontiers in electromagnetics , 1999 .

[8]  P. Hall,et al.  Dual-band antenna for hand held portable telephones , 1996 .

[9]  Kin-Lu Wong,et al.  Planar Antennas for Wireless Communications , 2003 .

[10]  N. Behdad,et al.  A Second-Order Dual X-/Ka-Band Frequency Selective Surface , 2008, IEEE Microwave and Wireless Components Letters.

[11]  G.F. Tsachtsiris,et al.  Analysis of a modified Sierpinski gasket monopole antenna printed on dual band wireless devices , 2004, IEEE Transactions on Antennas and Propagation.

[12]  C. Christodoulou,et al.  Analysis of frequency selective surfaces with ferrite substrates , 1995, IEEE Antennas and Propagation Society International Symposium. 1995 Digest.

[13]  N. Behdad,et al.  A New Technique for Design of Low-Profile, Second-Order, Bandpass Frequency Selective Surfaces , 2009, IEEE Transactions on Antennas and Propagation.

[14]  James T. Aberle,et al.  Two-port model of an antenna for use in characterizing wireless communications systems, obtained using efficiency measurements , 2003 .

[15]  Ben A. Munk,et al.  Frequency Selective Surfaces: Theory and Design , 2000 .

[16]  Spatial Filters for Linearly Polarized Antennas Using Free Standing Frequency Selective Surface , 2008 .

[17]  Jen-Yea Jan,et al.  Small planar monopole antenna with a shorted parasitic inverted-L wire for wireless communications in the 2.4-, 5.2-, and 5.8-GHz bands , 2004 .

[18]  Hung-Yu David Yang,et al.  A spectral recursive transformation method for electromagnetic waves in generalized anisotropic layered media , 1997 .