Further development of surface metrology methods for predicting the functional performance of flexible photovoltaic barrier films

Surface topography analysis plays a very significant role in determining the functional performance for many engineering surfaces. In this paper, feature characterisation techniques, based on the ‘Wolf pruning’ method are implemented to characterise micro and nano-scale features which have a dominant effect on the functional lifespan of flexible Photovoltaic (PV) modules. The densities and dimensions of the potential significant features are calculated by means of the feature “characterisation toolbox”. The outcome of this study has shown the potential of areal feature segmentation for detecting functionally significant defects present in Atomic Layer Deposition (ALD) barrier coatings of Al2O3 on polymer films. The analysis provides the basis for the development in process metrology for Roll-to-Roll (R2R) production of barrier coatings as applied to flexible PV arrays and is a first step in the demonstration of in-process use of feature parameters.

[1]  Steven M. George,et al.  Electrical characterization of thin Al2O3 films grown by atomic layer deposition on silicon and various metal substrates , 2002 .

[2]  Giuseppe Rossi,et al.  Effect of local flaws in polymeric permeation reducing barriers , 1993 .

[3]  J. Britt,et al.  CIGS Device Stability on Flexible Substrates , 2006, 2006 IEEE 4th World Conference on Photovoltaic Energy Conference.

[4]  Hans Nørgaard Hansen,et al.  Quantitative Characterisation of Surface Texture , 2000 .

[5]  R. McLean,et al.  ALD Moisture Barrier for Cu(InGa)Se2 Solar Cells , 2010 .

[6]  Samuel Graham,et al.  Improving the stability of atomic layer deposited alumina films in aqueous environments with metal oxide capping layers , 2013 .

[7]  Johan Wennerberg.  Design and Stability of Cu(In,Ga)Se2-Based Solar Cell Modules , 2002 .

[8]  Jian Wang,et al.  Numerical characterisation of biomedical titanium surface texture using novel feature parameters , 2011 .

[9]  Ping Mei,et al.  Planarization coating for polyimide substrates used in roll-to-roll fabrication of active matrix backplanes for flexible displays , 2012, Advanced Lithography.

[10]  Steven Hegedus,et al.  Encapsulation of Cu(InGa)Se2 solar cells with ALD Al2O3 flexible thin-film moisture barrier: Stability under 1000 hour damp heat and UV exposure , 2010, 2010 35th IEEE Photovoltaic Specialists Conference.

[11]  Steven M. George,et al.  Ca test of Al2O3 gas diffusion barriers grown by atomic layer deposition on polymers , 2006 .

[12]  Paul E. Burrows,et al.  Mechanisms of Vapor Permeation Through Multilayer Barrier Films: Lag Time Versus Equilibrium Permeation , 2004 .

[13]  S. George.  Atomic layer deposition: an overview. , 2010, Chemical reviews.

[14]  K J Stout,et al.  Development of methods for the characterisation of roughness in three dimensions , 2000 .

[15]  Liam Blunt,et al.  The Use of Surface Segmentation Methods to Characterise Laser Zone Surface Structure on Hard Disc Drives , 2011 .