A laboratory-scale binder jet additive manufacturing testbed for process exploration and material development

Binder jet additive manufacturing (BJAM) is capable of fabricating complex three-dimensional components from a variety of material classes. Understanding the fundamentals of BJAM, including spreading of thin layers of powder, powder-binder interactions, and post-processing is critical to develop robust process parameters for BJAM. Toward meeting these needs, this work presents the design, fabrication, and qualification of a testbed for modular, mechanized, BJAM. The testbed seeks to replicate the operating conditions of commercial AM equipment and features fully programmable motion control including powder spreading using a precision roller mechanism, powder supply via a vibrating hopper, and gantry positioning of an inkjet printhead. The inkjet deposition system allows for the use of variable nozzle diameters, the exploration of novel binder compositions, and full control of jetting parameters. Validation of the accuracy and repeatability of the machine and its subsystems, as well as the fabrication of exemplary stainless steel components, are described. The precision engineered testbed can therefore enable the study of the BJAM process, exploration of novel binder compositions, and processing of custom powders to further scientific research and industrial applicability of BJAM.

[1]  B. Derby.  Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution , 2010 .

[2]  Mark A. Ganter,et al.  A review of process development steps for new material systems in three dimensional printing (3DP) , 2008 .

[3]  Dileep Singh,et al.  Binder jetting additive manufacturing of silicon carbide ceramics: Development of bimodal powder feedstocks by modeling and experimental methods , 2020, Ceramics International.

[4]  Kamel Fezzaa,et al.  Real time observation of binder jetting printing process using high-speed X-ray imaging , 2019, Scientific Reports.

[5]  Y. Qiu,et al.  Experimental and theoretical investigation on ultra-thin powder layering in three dimensional printing (3DP) by a novel double-smoothing mechanism , 2015 .

[6]  N. Parab,et al.  Revealing particle-scale powder spreading dynamics in powder-bed-based additive manufacturing process by high-speed x-ray imaging , 2018, Scientific Reports.

[7]  Ian M. Hutchings,et al.  Inkjet Technology for Digital Fabrication , 2012 .

[8]  Christopher B. Williams,et al.  An exploration of binder jetting of copper , 2015 .

[9]  K. Myers,et al.  Binder jet printing of tungsten heavy alloy , 2019, International Journal of Refractory Metals and Hard Materials.

[10]  J. Barnes,et al.  Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges , 2020 .

[11]  R. German,et al.  Review: Thermal Debinding Process in Particulate Materials Processing , 2012 .

[12]  B. Derby,et al.  Probing Ink–Powder Interactions during 3D Binder Jet Printing Using Time-Resolved X-ray Imaging , 2020, ACS Applied Materials and Interfaces.

[13]  A. Elliott,et al.  Infiltration of Nanoparticles into Porous Binder Jet Printed Parts , 2016 .

[14]  Thomas H.J. Vaneker,et al.  New Strategies for Powder Compaction in Powder-based Rapid Prototyping Techniques , 2013 .

[15]  S. Pasebani,et al.  A Review on Binder Jet Additive Manufacturing of 316L Stainless Steel , 2019, Journal of Manufacturing and Materials Processing.

[16]  A. Mostafaei,et al.  Effect of powder size distribution on densification and microstructural evolution of binder-jet 3D-printed alloy 625 , 2019, Materials & Design.

[17]  Ian Gibson,et al.  Additive manufacturing technologies : 3D printing, rapid prototyping, and direct digital manufacturing , 2015 .

[18]  Christopher B. Williams,et al.  Effect of Particle Size Distribution on Powder Packing and Sintering in Binder Jetting Additive Manufacturing of Metals , 2017 .

[19]  Christopher B. Williams,et al.  Characterizing Binder–Powder Interaction in Binder Jetting Additive Manufacturing Via Sessile Drop Goniometry , 2018, Journal of Manufacturing Science and Engineering.

[20]  S. Babu,et al.  Powder bed binder jet 3D printing of Inconel 718: Densification, microstructural evolution and challenges☆ , 2017 .

[21]  Shlomo Magdassi,et al.  The Chemistry of Inkjet Inks , 2009 .

[22]  Silvia Vock,et al.  Powders for powder bed fusion: a review , 2019, Progress in Additive Manufacturing.

[23]  Yun Bai,et al.  Binder jetting additive manufacturing with a particle-free metal ink as a binder precursor , 2018, Materials & Design.

[24]  N. Crane,et al.  Influence of droplet velocity, spacing, and inter-arrival time on line formation and saturation in binder jet additive manufacturing , 2021 .

[25]  Z. Fan,et al.  Fabricating an effective calcium zirconate layer over the calcia grains via binder-jet 3D-printing for improving the properties of calcia ceramic cores , 2020 .

[26]  B. Reeja‐Jayan,et al.  Parametric analysis to quantify process input influence on the printed densities of binder jetted alumina ceramics , 2019 .

[27]  Mark A. Ganter,et al.  Development Process for Custom Three-Dimensional Printing (3DP) Material Systems , 2010 .

[28]  John Ormerod,et al.  Binder Jetting: A Novel NdFeB Bonded Magnet Fabrication Process , 2016 .

[29]  Brian N. Turner,et al.  A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness , 2015 .

[30]  Yun Bai,et al.  The effect of inkjetted nanoparticles on metal part properties in binder jetting additive manufacturing , 2018, Nanotechnology.

[31]  Don Suranga Dhanushka Uduwage.  Binder Jet Additive Manufacturing of Stainless Steel-Hydroxyapatite Bio-composite , 2015 .

[32]  J. Kiggans,et al.  Processing of complex-shaped collimators made via binder jet additive manufacturing of B4C and pressureless melt infiltration of Al , 2019, Materials & Design.

[33]  A. Hart,et al.  A modular testbed for mechanized spreading of powder layers for additive manufacturing. , 2021, The Review of scientific instruments.

[34]  Michael J Cima,et al.  Spreading and infiltration of inkjet-printed polymer solution droplets on a porous substrate. , 2002, Journal of colloid and interface science.

[35]  Chor Yen Yap,et al.  Review of selective laser melting : materials and applications , 2015 .

[36]  Mohsen Ziaee,et al.  Binder jetting: A review of process, materials, and methods , 2019, Additive Manufacturing.

[37]  Graham D. Martin,et al.  Inkjet Technology for Digital Fabrication: Hutchings/Inkjet Technology for Digital Fabrication , 2012 .

[38]  Emanuel M. Sachs,et al.  Ink-jet printing of binders for ceramic components , 2004 .

[39]  I. Polozov,et al.  Synthesis of titanium orthorhombic alloy using binder jetting additive manufacturing , 2019, Materials Letters.

[40]  M. Mansori,et al.  3D printing for rapid sand casting—A review , 2017 .

[41]  Wolfgang A. Wall,et al.  Critical Influences of Particle Size and Adhesion on the Powder Layer Uniformity in Metal Additive Manufacturing , 2018, Journal of Materials Processing Technology.

[42]  Michael J. Cima,et al.  Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model , 1992 .

[43]  Robert J. Strong,et al.  A review of melt extrusion additive manufacturing processes: I. Process design and modeling , 2014 .

[44]  Sanjay B. Joshi,et al.  On the development of powder spreadability metrics and feedstock requirements for powder bed fusion additive manufacturing , 2019, Additive Manufacturing.

[45]  M. Ziaee,et al.  Binder-Jet Printing of Fine Stainless Steel Powder with Varied Final Density , 2017 .

[46]  D. Siddel,et al.  An in-situ crosslinking binder for binder jet additive manufacturing , 2020 .

[47]  Emanuel M. Sachs,et al.  Three-Dimensional Printing: The Physics and Implications of Additive Manufacturing , 1993 .

[48]  M. Vlasea,et al.  Tailoring green and sintered density of pure iron parts using binder jetting additive manufacturing , 2018, Additive Manufacturing.

[49]  C. Kamath,et al.  Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges , 2015 .

[50]  R. Enneti,et al.  Effect of binder saturation and powder layer thickness on the green strength of the binder jet 3D printing (BJ3DP) WC-12%Co powders , 2019, International Journal of Refractory Metals and Hard Materials.

[51]  Samuel M. Allen,et al.  Improving Accuracy of Powder-Based Sff Processes by Metal Deposition from a Nanoparticle Dispersion , 2006 .

[52]  J. Shephard,et al.  An open-architecture metal powder bed fusion system for in-situ process measurements , 2017 .

[53]  Jean-Yves Hascoët,et al.  A review on additive manufacturing of sand molds by binder jetting and selective laser sintering , 2018, Rapid Prototyping Journal.