Precursor polymers for the carbon coating of Au@ZnO multipods for application as active material in lithium-ion batteries.

The synthesis of statistical and block copolymers based on polyacrylonitrile, as a source for carbonaceous materials, and thiol-containing repeating units as inorganic nanoparticle anchoring groups is reported. These polymers are used to coat Au@ZnO multipod heteroparticles with polymer brushes. IR spectroscopy and transmission electron microscopy prove the successful binding of the polymer onto the inorganic nanostructures. Thermogravimetric analysis is applied to compare the binding ability of the block and statistical copolymers. Subsequently, the polymer coating is transformed into a carbonaceous (partially graphitic) coating by pyrolysis. The obtained carbon coating is characterized by Raman spectroscopy and energy-dispersive X-ray (EDX) spectroscopy. The benefit of the conformal carbon coating of the Au@ZnO multipods regarding its application as lithium-ion anode material is revealed by performing galvanostatic cycling, showing a highly enhanced and stabilized electrochemical performance of the carbon-coated particles (still 831 mAh g(-1) after 150 cycles) with respect to the uncoated ones (only 353 mAh g(-1) after 10 cycles).

[1]  K. Char,et al.  Strategy for good dispersion of well-defined tetrapods in semiconducting polymer matrices. , 2014, Macromolecular rapid communications.

[2]  Limin Wang,et al.  Hierarchical NiFe2O4/Fe2O3 nanotubes derived from metal organic frameworks for superior lithium ion battery anodes , 2014 .

[3]  W. Tremel,et al.  Stabilizing nanostructured lithium insertion materials via organic hybridization: A step forward towards high-power batteries , 2014 .

[4]  M. Winter,et al.  Transition-Metal-Doped Zinc Oxide Nanoparticles as a New Lithium-Ion Anode Material , 2013 .

[5]  W. Tremel,et al.  Polyacrylonitrile block copolymers for the preparation of a thin carbon coating around TiO2 nanorods for advanced lithium-ion batteries. , 2013, Macromolecular rapid communications.

[6]  W. Tremel,et al.  Controlled synthesis of linear and branched Au@ZnO hybrid nanocrystals and their photocatalytic properties. , 2013, Nanoscale.

[7]  M. Winter,et al.  Influence of the carbonaceous conductive network on the electrochemical performance of ZnFe2O4 nanoparticles , 2013 .

[8]  Thomas A. Yersak,et al.  Conformal Coatings of Cyclized‐PAN for Mechanically Resilient Si nano‐Composite Anodes , 2013 .

[9]  M. Winter,et al.  Carbon Coated ZnFe2O4 Nanoparticles for Advanced Lithium‐Ion Anodes , 2013 .

[10]  Markus Döblinger,et al.  Nanoscale porous framework of lithium titanate for ultrafast lithium insertion. , 2012, Angewandte Chemie.

[11]  Li Lu,et al.  A high-performance LiCoPO4/C core/shell composite for Li-ion batteries , 2012 .

[12]  M. Winter,et al.  Percolating networks of TiO2 nanorods and carbon for high power lithium insertion electrodes , 2012 .

[13]  Haoshen Zhou,et al.  Enhancing the performances of Li-ion batteries by carbon-coating: present and future. , 2012, Chemical communications.

[14]  C. M. Li,et al.  Hierarchical protonated titanate nanostructures for lithium-ion batteries. , 2011, Nanoscale.

[15]  Jing Zhu,et al.  Synthesis of hierarchical flower-like ZnO nanostructures and their functionalization by Au nanoparticles for improved photocatalytic and high performance Li-ion battery anodes , 2011 .

[16]  Rita Baddour-Hadjean,et al.  Raman microspectrometry applied to the study of electrode materials for lithium batteries. , 2010, Chemical reviews.

[17]  G. Yin,et al.  Evaluation of ZnO nanorod arrays with dandelion-like morphology as negative electrodes for lithium-ion batteries , 2009 .

[18]  Jian Jiang,et al.  Carbon/ZnO Nanorod Array Electrode with Significantly Improved Lithium Storage Capability. , 2009 .

[19]  M. Shikano,et al.  Gold model anodes for Li-ion batteries: Single crystalline systems studied by in situ X-ray diffraction , 2008 .

[20]  Jin-Song Hu,et al.  Nanostructured Materials for Electrochemical Energy Conversion and Storage Devices , 2008 .

[21]  R. Zentel,et al.  Liquid crystalline phases from polymer functionalised semiconducting nanorods , 2008 .

[22]  P. Théato,et al.  Versatile Synthesis of Functional Gold Nanoparticles: Grafting Polymers From and Onto , 2008 .

[23]  David P. Norton,et al.  Functionalizing Zn- and O-terminated ZnO with thiols , 2007 .

[24]  H. M. Ezekiel,et al.  Preparation of graphite fibers from polymeric fibers , 2007 .

[25]  Sanjeev Mukerjee,et al.  Block Copolymer-Templated Nanocomposite Electrodes for Rechargeable Lithium Batteries , 2002 .

[26]  G. Taillades,et al.  Metal-based very thin film anodes for lithium ion microbatteries , 2002 .

[27]  J. Lai,et al.  Functional Polymers from Novel Carboxyl-Terminated Trithiocarbonates as Highly Efficient RAFT Agents , 2002 .

[28]  P. Searson,et al.  Influence of organic capping ligands on the growth kinetics of ZnO nanoparticles , 2001 .

[29]  J. Irvine,et al.  Electrochemical performance of ball-milled ZnO–SnO2 systems as anodes in lithium-ion battery , 2001 .

[30]  P. Rajalingam,et al.  POLYACRYLONITRILE PRECURSOR FOR CARBON FIBERS , 1991 .

[31]  William B. White,et al.  Characterization of diamond films by Raman spectroscopy , 1989 .

[32]  Emanuel Peled,et al.  The Electrochemical Behavior of Alkali and Alkaline Earth Metals in Nonaqueous Battery Systems—The Solid Electrolyte Interphase Model , 1979 .

[33]  X. Sun,et al.  Understanding and recent development of carbon coating on LiFePO4 cathode materials for lithium-ion batteries , 2012 .

[34]  Wei-Jun Zhang.  A review of the electrochemical performance of alloy anodes for lithium-ion batteries , 2011 .

[35]  Mathias Brust,et al.  Synthesis of thiol-derivatised gold nanoparticles in a two-phase liquid-liquid system , 1994 .