论文信息 - The development of compressor-driven metal hydride heat pump (CDMHHP) system as an air conditioner

The development of compressor-driven metal hydride heat pump (CDMHHP) system as an air conditioner

Abstract The compressor-driven metal hydride heat pump (CDMHHP) using commercialized oil-type compressor is built to demonstrate the practical applicability of metal hydride air-conditioning system. Extensive research has been carried out on the design, construction and operating performance of the system. The experimental results indicate that the present CDMHHP can produce a maximum cooling power of 353 kcal/kg - alloy h and an energy efficiency (COP) of 1.8 with a half-cycle time of 3 min . The minimum cooling temperature is 6°C at 7 Nm 3 / min airflow rate.

[1] M. Ron,et al. A hydrogen heat pump as a bus air conditioner , 1984 .

[2] S. Suda,et al. The dynamics of hydrogen transfer in a metal hydride heat pump , 1987 .

[3] Jai-Young Lee,et al. The intrinsic degradation behaviour of the Laves phase alloy Zr0.9Ti0.1Cr0.9Fe1.1 upon temperature-induced hydrogen absorption-desorption cycling , 1993 .

[4] Shinku Lee,et al. Operating characteristics of metal hydride heat pump using Zr-based Laves phases , 1995 .

[5] S. Suda,et al. Dynamic behaviour of paired metal hydrides: I. Experimental method and results , 1986 .

[6] P. Weinzierl,et al. Dynamic characteristics of single- and dual-hydride bed devices , 1983 .

[7] M. Gambini. Metal hydride energy systems performance evaluation. Part A: Dynamic analysis model of heat and mass transfer , 1994 .