Shear Performance Assessment of Timber Log-House Walls under In-Plane Lateral Loads via Numerical and Analytical Modelling

Log-house is an ancient construction technology based on the superposition of linear timber logs, connected to the orthogonal walls by a system of carvings, notches and corner joints. Due to the fact that this solution is widely used in constructions located in seismic or windy areas, the in-plane behaviour of walls represents an attractive research topic. In this paper, major outcomes of a Finite-Element (FE) numerical investigation carried out on single corner joints currently in use for log-house buildings are discussed under different loading conditions (i.e., in-plane lateral and vertical compressive loads), including parametric analyses to capture the key aspects of their typical structural response. Careful consideration is paid for the elastic stiffness of such joints, being of primary interest for design purposed. At the same time, a linear analytical formulation is presented, with the aim of providing a simple but useful tool in support of design, and especially to estimate the maximum lateral displacement/resistance for a given log-house wall when subjected to in-plane lateral forces. There, the intrinsic mechanical features of corner joints and related aspects are properly considered (i.e., static friction phenomena, as well as the presence of small gaps, etc.). The analytical model, in addition, takes advantage of the numerically predicted joint stiffness values, being dependent on several parameters. As shown, rather good agreement is obtained between the FE model output, the analytical predictions and past reference experimental/numerical results available in the literature for full-scale log-house walls under in-plane lateral loads, hence suggesting the potential of the proposed approach. In conclusion, possible Force-Preload-Displacement (FPD) charts are presented, to act as simplified tools for preliminary design considerations.

[1]  Chiara Bedon,et al.  Non-linear modelling of the in-plane seismic behaviour of timber Blockhaus log-walls , 2015 .

[2]  Claudio Amadio,et al.  Experimental Study and Numerical Investigation of Blockhaus Shear Walls Subjected to In-Plane Seismic Loads , 2015 .

[3]  Chiara Bedon,et al.  Experimental and numerical analysis of in-plane compressed unprotected log-haus timber walls in fire conditions , 2019, Fire Safety Journal.

[4]  Chiara Bedon,et al.  Derivation of buckling design curves via FE modelling for in-plane compressed timber log-walls in accordance with the Eurocode 5 , 2017, European Journal of Wood and Wood Products.

[5]  B. Heimeshoff,et al.  Bemessungsverfahren zur Abtragung vertikaler Lasten in Blockwänden , 1992, Holz als Roh- und Werkstoff.

[6]  G. Schickhofer,et al.  Screwed joints in cross laminated timber structures , 2014 .

[7]  Chiara Bedon,et al.  Finite Element assessment of the seismic performance of three dimensional Blockhaus buildings , 2016 .

[8]  Jozsef Bodig,et al.  Mechanics of Wood and Wood Composites , 1982 .

[9]  Paulo B. Lourenço,et al.  Seismic Analysis of a 2-Storey Log House , 2013 .

[10]  Chiara Bedon,et al.  Numerical and analytical assessment of the buckling behaviour of Blockhaus log-walls under in-plane compression , 2015 .

[11]  Chiara Bedon,et al.  Numerical Investigation of Timber Log-Haus Walls with Steel Dovetail Reinforcements under In-Plane Seismic Loads , 2018 .

[12]  Josef Eberhardsteiner,et al.  Mechanisches Verhalten von Fichtenholz , 2002 .

[13]  Yasuhide Murase,et al.  Friction of wood sliding on various materials , 1984 .

[14]  Thomas H. Miller,et al.  An experimental investigation of foundation anchorage details and base shear capacity for log buildings , 2005 .

[15]  B. Heimeshoff,et al.  Zur Abtragung vertikaler Lasten in Blockwänden , 1992, Holz als Roh- und Werkstoff.

[16]  Roberto Tomasi,et al.  Analysis of timber log-house construction system via experimental testing and analytical modelling , 2016 .

[17]  Jorge M. Branco,et al.  Structural behaviour of log timber walls under lateral in-plane loads , 2012 .

[18]  Claudio Amadio,et al.  Assessment of the structural stability of Blockhaus timber log-walls under in-plane compression via full-scale buckling experiments , 2015 .

[19]  Gerhard Schickhofer,et al.  Experimental investigations and design provisions of steel-to-timber joints with annular-ringed shank nails for Cross-Laminated Timber structures , 2016 .