Direct writing of microlenses in polycarbonate with excimer laser ablation.

A method for fabricating microlenses in polycarbonate material is reported. Using a direct-write technique based on scanning excimer laser ablation with a circular beam, we can etch an arbitrary shape in the polymer material. The beam is obtained by imaging a circular aperture onto the polymer surface, and scanning is realized by the translation stage carrying the sample, which makes successive contours with well-chosen diameters and scan velocities. Afterward, to smooth the ablated surface and release it from debris, a large beam aperture covering the full lens area is used to ablate the lens deeper into the substrate. The fabrication process and the characterization method are described, including calculation of the contour set for a desired lens shape. The optical performance is evaluated by Mach-Zehnder interferometry, showing that aberrations below lambda/10 are possible for slow lenses.

[1]  S. Mihailov,et al.  Fabrication of refractive microlens arrays by excimer laser ablation of amorphous Teflon. , 1993, Applied optics.

[2]  Reinhart Poprawe,et al.  Debris-reduced laser machining of polymeric waveguides for optoelectronic applications , 2001, SPIE LASE.

[3]  F. Beinhorn,et al.  Micro-lens arrays generated by UV laser irradiation of doped PMMA , 1999 .

[4]  J R Leger,et al.  Rapid fabrication of diffractive optical elements by use of image-based excimer laser ablation. , 1997, Applied optics.

[5]  Formation of the surface structure of polyethylene-terephtalate (PET) due to ArF excimer laser ablation , 1996 .

[6]  G. Weimann,et al.  Laser-induced dry etching of integrated InP microlenses , 1997 .

[7]  Bodil Braren,et al.  Nature of ‘‘incubation pulses’’ in the ultraviolet laser ablation of polymethyl methacrylate , 1990 .

[8]  Donald J. Hayes,et al.  Microjet printing of micro-optical interconnects and sensors , 2000, Photonics West - Optoelectronic Materials and Devices.

[9]  Roel G. Baets,et al.  Laser-ablation-based technique for flexible fabrication of microlenses in polymer materials , 2002, International Symposium on Laser Precision Microfabrication.

[10]  M. Nakatsuka,et al.  Laser ablative shaping of plastic optical components for phase control. , 1999, Applied optics.

[11]  P. Chavel,et al.  Microlenses fabricated by ultraviolet excimer laser irradiation of poly(methyl methacrylate) followed by styrene diffusion. , 1996, Applied optics.

[12]  Y. Komachi,et al.  Microlenses and Microlens Arrays Formed on a Glass Plate by Use of a CO(2) Laser. , 1998, Applied optics.

[13]  Michael T. Gale,et al.  Fabrication of continuous-relief micro-optical elements by direct laser writing in photoresists , 1994 .

[14]  Roel G. Baets,et al.  Excimer-laser-ablation based microlens fabrication for optical fiber coupling purposes , 2003, Photonics Fabrication Europe.