Simulation of polymer removal from a powder injection molding compact by thermal debinding

Powder injection molding (PIM) is an important net-shape manufacturing process. Thermal debinding is a common methodology for the final removal of residual polymer from a PIM compact prior to sintering. This process is an intricate combination of evaporation, liquid and gas migration, pyrolysis of polymer, and heat transfer in porous media. A better understanding of thermal debinding could lead to optimization of the process to prevent the formation of defects. Simulation of the process based on an integrated mathematical model for mass and heat transfer in porous media is proposed. The mechanisms of mass transport, i.e., liquid flow, gas flow, vapor diffusion, and convection, as well as the phase transitions of polymer, and their interactions, are included in the model. The macroscopic partial differential equations are formulated by volume averaging of the microscopic conservation laws. The basic equations consist of mass conservation and energy conservation and are solved numerically. Polymer residue, pressure, and temperature distributions are predicted. The importance of the various mass transfer mechanisms is evaluated. The effects of key mass transfer parameters on thermal debinding are discussed. It is revealed from the results that the assumed binder front, which is supposed to recede into the powder compact as removal progresses, does not exist. The mass flux of polymer liquid is of the same order of the mass flux of polymer vapor in the gas phase, and the polymer vapor diffusion in the liquid phase is negligible.

[1]  O. Biest,et al.  Finite element modelling of binder removal from ceramic mouldings , 1998 .

[2]  Van P. Carey,et al.  The properties of gases & liquids: 4th Edition. Robert C. Reid, John M. Prausnitz, and Bruce E. Poling, McGraw-Hill Book Company, New York, NY, 1987, 741 pages, $49.50. , 1988 .

[3]  John Evans,et al.  Modelling the removal of organic vehicle from ceramic or metal mouldings: The effect of gas permeation on the incidence of defects , 1995 .

[4]  J. Crank,et al.  On the removal of organic vehicle from moulded ceramic bodies , 1991, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[5]  Chao-Yang Wang,et al.  A multiphase mixture model for multiphase, multicomponent transport in capillary porous media—I. Model development , 1996 .

[6]  J. Ulicny,et al.  Liquid‐Phase Transport During Removal of Organic Binders in Injection‐Molded Ceramics , 1990 .

[7]  Michael A. Galler,et al.  Computer simulations of binder removal from 2-D and 3-D model particulate bodies , 1996 .

[8]  L. Riedel,et al.  Kritischer Koeffizient, Dichte des gesättigten Dampfes und Verdampfungswärme. Untersuchungen über eine Erweiterung des Theorems der übereinstimmenden Zustände. Teil III , 1954 .

[9]  K. M. Watson,et al.  Thermodynamics of the Liquid State , 1943 .

[10]  Adrian E. Scheidegger,et al.  The physics of flow through porous media , 1957 .

[11]  J. S. Vrentas,et al.  Prediction of diffusion coefficients for polymer‐solvent systems , 1982 .

[12]  J. Lewis,et al.  Binder Distribution in Ceramic Greenware During Thermolysis , 1989 .

[13]  A. P. Malinauskas,et al.  Flow and Diffusion of Gases in Porous Media , 1967 .

[14]  Edward L Cussler,et al.  Diffusion: Mass Transfer in Fluid Systems , 1984 .

[15]  I. Aksay,et al.  Simultaneous momentum, heat and mass transfer with chemical reaction in a disordered porous medium: application to binder removal from a ceramic green body , 1990 .

[16]  R. German.  Porosity and particle size effects on the gas flow characteristics of porous metals , 1981 .

[17]  P. Calvert,et al.  Theoretical models for binder burnout , 1990 .

[18]  K. Hwang,et al.  Thermal debinding of powder injection molded parts: Observations and mechanisms , 1992 .

[19]  H. Vogel,et al.  Das Temperaturabhangigkeitsgesetz der Viskositat von Flussigkeiten , 1921 .

[20]  J. Smith,et al.  Diffusion in catalyst pellets , 1962 .

[21]  C. Wilke.  A Viscosity Equation for Gas Mixtures , 1950 .

[22]  R. A. Aziz,et al.  Empirical Equations to Calculate 16 of the Transport Collision Integrals Ω(l, s)* for the Lennard‐Jones (12–6) Potential , 1972 .

[23]  D. Tsai.  Pressure Buildup and Internal Stresses During Binder Burnout: Numerical Analysis , 1991 .

[24]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[25]  P. Flory.  Principles of polymer chemistry , 1953 .