Morphing and Shape Control using Unsymmetrical Composites

Unsymmetrical carbon fiber/epoxy composites with bonded piezoelectric actuators are investigated as a means to shape or morph, the composite structures. Both a cantilever and unsupported laminate structure are examined along with their response to applied strains (from piezoelectric actuators) and applied mechanical load; with particular emphasis on the characterization of shape/deflection, the influence of externally applied mechanical loads and methods of reversing or promoting snap-through of these materials from one stable state to another. A variety of shape change/actuation modes for such structures have been identified namely, (i) reversible actuation by maintaining a constant stable state using piezoelectric actuation, (ii) an increased degree of shape change by irreversible snap-through using piezoelectric actuation and (iii) reversible snap-through using combined piezoelectric actuation and an externally applied load.

[1]  Ajit D. Kelkar,et al.  [american institute of aeronautics and astronautics 45th aiaa/asme/asce/ahs/asc structures, structural dynamics & materials conference - palm springs, california ()] 45th aiaa/asme/asce/ahs/asc structures, structural dynamics materials conference - comparative study of woven-roving and stitch-bonded , 2004 .

[2]  D. Inman,et al.  Anisotropic Laminar Piezocomposite Actuator Incorporating Machined PMN–PT Single-crystal Fibers , 2006 .

[3]  J. N. Kudva,et al.  Overview of the DARPA Smart Wing Project , 2004 .

[4]  Carlos E. S. Cesnik,et al.  Optimization design framework for integrally twisted helicopter blades , 2004 .

[5]  Lothar Kroll,et al.  Design of multistable composites for application in adaptive structures , 2002 .

[6]  Theo Fett,et al.  Determination of Room-temperature Tensile Creep of PZT , 1998 .

[7]  Mujahid Abdulrahim,et al.  Flight Characteristics of Shaping the Membrane Wing of a Micro Air Vehicle , 2005 .

[8]  Michael W. Hyer,et al.  SMA-induced snap-through of unsymmetric fiber-reinforced composite laminates , 2003 .

[9]  Mary Frecker,et al.  Aircraft Structural Morphing Using Tendon-Actuated Compliant Cellular Trusses , 2005 .

[10]  Michael W. Hyer,et al.  A Morphing Concept Based on Unsymmetric Composite Laminates and Piezoceramic MFC Actuators , 2004 .

[11]  Keith A. Seffen,et al.  Bi-stable concepts for reconfigurable structures , 2004 .

[12]  Sridhar Kota,et al.  Design of Compliant Mechanisms for Morphing Structural Shapes , 2003 .

[13]  Jae-Sang Park,et al.  Analytical development of single crystal Macro Fiber Composite actuators for active twist rotor blades , 2005 .

[14]  L. J. Nelson,et al.  Smart piezoelectric Fibre composites , 2002 .

[15]  Daniel J. Inman,et al.  Anisotropic Piezocomposite Actuator Incorporating Machined PMN-PT Single Crystal Fibers , 2004 .

[16]  Hewon Jung,et al.  Tracking control of piezoelectric actuators , 2001 .

[17]  Carlos E. S. Cesnik,et al.  Closed-loop control test of the NASA/Army/MIT active twist rotor for vibration reduction , 2003 .

[18]  Michael W. Hyer,et al.  Snap-Through of Unsymmetric Cross-Ply Laminates Using Piezoceramic Actuators , 2003 .

[19]  Paul M. Weaver,et al.  A concept for the generation of out-of-plane distortion from tailored FRP laminates , 2004 .

[20]  Mujahid Abdulrahim,et al.  Flight Testing A Micro Air Vehicle Using Morphing For Aeroservoelastic Control , 2004 .

[21]  Carlos E. S. Cesnik,et al.  Optimum Design Framework for Integrally Twisted Helicopter Blades , 2004 .