Achieving structural stability of LiCoO2 at high-voltage by gadolinium decoration

[1]  Yunjiao Li,et al.  Multifunctionality of cerium decoration in enhancing the cycling stability and rate capability of a nickel-rich layered oxide cathode. , 2021, Nanoscale.

[2]  Xiangfeng Liu,et al.  Tailoring Co3d and O2p band centers to inhibit oxygen escape for stable 4.6V LiCoO2 cathodes. , 2021, Angewandte Chemie.

[3]  Suqing Wang,et al.  Improving diffusion kinetics and phase stability of LiCoO2 via surface modification at elevated voltage , 2021 .

[4]  Kang Xu,et al.  Structural origin of the high-voltage instability of lithium cobalt oxide , 2021, Nature Nanotechnology.

[5]  Jie Zhu,et al.  The Synergistic Effect of Gd Modification on Improving the Electrochemical Performance of LiNi0.88Co0.09Al0.03O2 Cathode Materials , 2021 .

[6]  Dawei Song,et al.  Study on the formation, development and coating mechanism of new phases on interface in LiNbO3-coated LiCoO2 , 2020 .

[7]  N. Zettsu,et al.  Effects of a solid electrolyte coating on the discharge kinetics of a LiCoO2 electrode: mechanism and potential applications , 2020 .

[8]  Liquan Chen,et al.  Realizing long-term cycling stability and superior rate performance of 4.5 V–LiCoO2 by aluminum doped zinc oxide coating achieved by a simple wet-mixing method , 2020 .

[9]  Yong Yang,et al.  Enabling Stable High‐Voltage LiCoO2 Operation by Using Synergetic Interfacial Modification Strategy , 2020, Advanced Functional Materials.

[10]  C. Jung,et al.  Degradation of High‐Nickel‐Layered Oxide Cathodes from Surface to Bulk: A Comprehensive Structural, Chemical, and Electrical Analysis , 2020, Advanced Energy Materials.

[11]  Haoqing Hou,et al.  Surface Modification of LiNi0.8Co0.1Mn0.1O2 Cathode Material by Coating FePO4 with Yolk-shell Structure for Improved Electrochemical Performance. , 2020, ACS applied materials & interfaces.

[12]  H. Katayama,et al.  Improvement of float charge durability for LiCoO2 electrodes under high voltage and storage temperature by suppressing O1-Phase transition , 2020 .

[13]  Bingkun Guo,et al.  An Overview on the Advances of LiCoO2 Cathodes for Lithium‐Ion Batteries , 2020, Advanced Energy Materials.

[14]  Qinghua Zhang,et al.  An In Situ Formed Surface Coating Layer Enabling LiCoO2 with Stable 4.6 V High‐Voltage Cycle Performances , 2020, Advanced Energy Materials.

[15]  Bingkun Guo,et al.  One-Step Integrated Comodification to Improve the Electrochemical Performances of High-Voltage LiCoO2 for Lithium-Ion Batteries , 2020 .

[16]  Yong Yang,et al.  Recent advances and historical developments of high voltage lithium cobalt oxide materials for rechargeable Li-ion batteries , 2020 .

[17]  Bingkun Guo,et al.  Achieving Stable Cycling of LiCoO2 at 4.6 V by Multilayer Surface Modification , 2020, Advanced Functional Materials.

[18]  Yao Zhou,et al.  High-Voltage LiCoO2 Material Encapsulated in a Li4Ti5O12Ultrathin Layer by High-Speed Solid-Phase Coating Process , 2020 .

[19]  Tian‐Wen Zhang,et al.  Blow-Spinning Enabled Precise Doping and Coating for Improving High Voltage Lithium Cobalt Oxide Cathode Performance. , 2019, Nano letters.

[20]  T. Kallio,et al.  The effect of synthesis modifications on the lithium cobalt oxide using commercial precursors , 2019, Electrochimica Acta.

[21]  Jaephil Cho,et al.  Unveiling Nickel Chemistry in Stabilizing High‐Voltage Cobalt‐Rich Cathodes for Lithium‐Ion Batteries , 2019, Advanced Functional Materials.

[22]  Qinghua Zhang,et al.  Structural Distortion Induced Charge Gradient Distribution of Co Ions in Delithiated LiCoO2 Cathode. , 2019, The journal of physical chemistry letters.

[23]  Jun Lu,et al.  Boosting Cell Performance of LiNi0.8 Co0.15 Al0.05 O2 via Surface Structure Design. , 2019, Small.

[24]  Yan Yu,et al.  A Novel Protective Strategy on High‐Voltage LiCoO 2 Cathode for Fast Charging Applications: Li 1.6 Mg 1.6 Sn 2.8 O 8 Double Layer Structure via SnO 2 Surface Modification , 2019, Small Methods.

[25]  Jianyin Wang,et al.  Reversible phase transition enabled by binary Ba and Ti-based surface modification for high voltage LiCoO2 cathode , 2019, Journal of Power Sources.

[26]  Yunhui Huang,et al.  Enabling high rate performance of Ni-rich layered oxide cathode by uniform titanium doping , 2019, Materials Today Energy.

[27]  X. Bai,et al.  Al-Ti-oxide coated LiCoO2 cathode material with enhanced electrochemical performance at a high cutoff charge potential of 4.5 V , 2019, Journal of Alloys and Compounds.

[28]  Tongchao Liu,et al.  Ni/Li Disordering in Layered Transition Metal Oxide: Electrochemical Impact, Origin, and Control. , 2019, Accounts of chemical research.

[29]  Hanseul Kim,et al.  In situ electrochemical surface modification for high-voltage LiCoO2 in lithium ion batteries , 2019, Journal of Power Sources.

[30]  Qingyu Li,et al.  Construction of highly conductive network for improving electrochemical performance of lithium iron phosphate , 2019, Electrochimica Acta.

[31]  Aobing Du,et al.  A Novel Bifunctional Self‐Stabilized Strategy Enabling 4.6 V LiCoO2 with Excellent Long‐Term Cyclability and High‐Rate Capability , 2019, Advanced science.

[32]  Siyuan Li,et al.  Electrochemical surface passivation of LiCoO2 particles at ultrahigh voltage and its applications in lithium-based batteries , 2018, Nature Communications.

[33]  Taeeun Yim,et al.  Egg-shell structured LiCoO2 by Cu2+ substitution to Li+ sites via facile stirring in an aqueous copper(II) nitrate solution , 2017 .

[34]  Xiqian Yu,et al.  Al2O3 surface coating on LiCoO2 through a facile and scalable wet-chemical method towards high-energy cathode materials withstanding high cutoff voltages , 2017 .

[35]  Qian Sun,et al.  Highly stable Li1.2Mn0.54Co0.13Ni0.13O2 enabled by novel atomic layer deposited AlPO4 coating , 2017 .

[36]  Evan M. Erickson,et al.  Stabilizing nickel-rich layered cathode materials by a high-charge cation doping strategy: zirconium-doped LiNi0.6Co0.2Mn0.2O2 , 2016 .

[37]  Xingjiang Liu,et al.  The investigation of Ti-modified LiCoO2 materials for lithium ion battery , 2014 .

[38]  C. Chen,et al.  Analysis of the chemical diffusion coefficient of lithium ions in Li3V2(PO4)3 cathode material , 2010 .

[39]  S. Kim,et al.  Improving the rate performance of LiCoO2 by Zr doping , 2009 .

[40]  S. Gopukumar,et al.  Microwave assisted synthesis and electrochemical behaviour of LiMg0.1Co0.9O2 for lithium rechargeable batteries , 2009 .

[41]  G. Nazri,et al.  Electrochemical performances of layered LiM1−yMy′O2 (M=Ni, Co; M′=Mg, Al, B) oxides in lithium batteries , 2000 .