Sensors for process and structural health monitoring of aerospace composites: A review

[1]  Pawel Wierzba,et al.  Low-Coherence Interferometric Fiber-Optic Sensors with Potential Applications as Biosensors , 2017, Sensors.

[2]  Sida Luo,et al.  SWCNT-thin-film-enabled fiber sensors for lifelong structural health monitoring of polymeric composites - From manufacturing to utilization to failure , 2014 .

[3]  Anand Asundi,et al.  Crack monitoring using multiple smart materials; fiber-optic sensors & piezo sensors , 2017 .

[4]  Morten Ibsen,et al.  Birefringent Bragg Grating in C-Shaped Optical Fiber as a Temperature-Insensitive Refractometer † , 2018, Sensors.

[5]  K. Loh,et al.  Spatial Sensing Using Electrical Impedance Tomography , 2012, IEEE Sensors Journal.

[6]  S. Lanceros‐Méndez,et al.  Piezoresistive response of extruded polyaniline/(styrene-butadiene-styrene) polymer blends for force and deformation sensors , 2018 .

[7]  T. Takeda,et al.  Fracture behavior and crack sensing capability of bonded carbon fiber composite joints with carbon nanotube-based polymer adhesive layer under Mode I loading , 2017 .

[8]  T. Peijs,et al.  Improved fracture toughness and integrated damage sensing capability by spray coated CNTs on carbon fibre prepreg , 2015 .

[9]  Sida Luo,et al.  Graphite nanoplatelet enabled embeddable fiber sensor for in situ curing monitoring and structural health monitoring of polymeric composites. , 2014, ACS applied materials & interfaces.

[10]  T. Chou,et al.  Carbon Nanotube Networks: Sensing of Distributed Strain and Damage for Life Prediction and Self Healing , 2006 .

[11]  P. Poulin,et al.  Structural health monitoring of glass fiber reinforced composites using embedded carbon nanotube (CNT) fibers , 2010 .

[12]  Wei Zhang,et al.  A Unified Framework for Street-View Panorama Stitching , 2016, Sensors.

[13]  P. Carlone,et al.  Multi-scale modeling and online monitoring of resin flow through dual-scale textiles in liquid composite molding processes , 2018 .

[14]  P. Ma,et al.  Carbon Nanotubes for Defect Monitoring in Fiber-Reinforced Polymer Composites , 2017 .

[15]  W. Ostachowicz,et al.  Temperature and damage influence on electromechanical impedance method used for carbon fibre–reinforced polymer panels , 2017 .

[16]  Mark Holmes,et al.  Aerospace looks to composites for solutions , 2017 .

[17]  A. Naghashpour,et al.  A technique for in-situ detection of random failure in composite structures under cyclic loading , 2019, Journal of Composite Materials.

[18]  Hugo Thienpont,et al.  Aerospace-grade surface mounted optical fibre strain sensor for structural health monitoring on composite structures evaluated against in-flight conditions , 2019, Smart Materials and Structures.

[19]  Rui Ding,et al.  A stretchable and large-scale guided wave sensor network for aircraft smart skin of structural health monitoring , 2019, Structural Health Monitoring.

[20]  Beatriz Ortega,et al.  Fabrication of tunable chirped mPOF Bragg gratings using a uniform phase mask. , 2018, Optics express.

[21]  Zahra Sharif Khodaei,et al.  An Event-Triggered Energy-Efficient Wireless Structural Health Monitoring System for Impact Detection in Composite Airframes , 2019, IEEE Internet of Things Journal.

[22]  R. Verdejo,et al.  A comparative study on the mechanical, electrical and piezoresistive properties of polymer composites using carbon nanostructures of different topology , 2018 .

[23]  L M Sim,et al.  Damage detection and assessment in fibre-reinforced composite structures with embedded fibre optic sensors-review , 2002 .

[24]  Martin Kyncl,et al.  Damage detection in carbon fiber–reinforced polymer composite via electrical resistance tomography with Gaussian anisotropic regularization , 2018, Structural Health Monitoring.

[25]  Matthew C. Mowlem,et al.  Evaluating impact damage in CFRP using fibre optic sensors , 2007 .

[26]  Ginu Rajan,et al.  Overview of Fiber Optic Sensor Technologies for Strain/Temperature Sensing Applications in Composite Materials , 2016, Sensors.

[27]  Yishou Wang,et al.  In-situ monitoring of liquid composite molding process using piezoelectric sensor network , 2020, Structural Health Monitoring.

[28]  M. Farahani,et al.  Structural health monitoring of defective single lap adhesive joints using graphene nanoplatelets , 2020 .

[29]  Laurent Pambaguian,et al.  Damage identification in carbon fiber reinforced polymer plates using electrical resistance tomography mapping , 2013 .

[30]  K. Liao,et al.  Graphene coated piezo-resistive fabrics for liquid composite molding process monitoring , 2017 .

[31]  Jan Vanfleteren,et al.  Design and Integration of Flexible Sensor Matrix for in Situ Monitoring of Polymer Composites. , 2018, ACS sensors.

[32]  Mickaël Lallart,et al.  Review on energy harvesting for structural health monitoring in aeronautical applications , 2015 .

[33]  Roy Ikegami,et al.  Advances in the development of built-in diagnostic system for filament wound composite structures , 2006 .

[34]  S. Evoy,et al.  A review of piezoelectric polymers as functional materials for electromechanical transducers , 2014 .

[35]  Angel Lozano,et al.  Structural Health Monitoring in Composite Structures by Fiber-Optic Sensors † , 2018, Sensors.

[36]  Mohammad H. Sherafat,et al.  Structural health monitoring of a composite skin-stringer assembly using within-the-bond strategy of guided wave propagation , 2016 .

[37]  Homayoun Najjaran,et al.  Graphene-Coated Spandex Sensors Embedded into Silicone Sheath for Composites Health Monitoring and Wearable Applications. , 2019, Small.

[38]  Marco Giglio,et al.  A Lamb waves based statistical approach to structural health monitoring of carbon fibre reinforced polymer composites. , 2015, Ultrasonics.

[39]  Afzal Suleman,et al.  Monitoring the Damage State of Fiber Reinforced Composites Using an FBG Network for Failure Prediction , 2017, Materials.

[40]  Luca Benini,et al.  A Sub-mW IoT-Endnode for Always-On Visual Monitoring and Smart Triggering , 2017, IEEE Internet of Things Journal.

[41]  Seung-Hwan Chang,et al.  Performance evaluation of smart grid fabrics comprising carbon dry fabrics and PVDF ribbon sensors for structural health monitoring , 2019, Composites Part B: Engineering.

[42]  Victor Giurgiutiu,et al.  Electro-Mechanical Impedance Method for Crack Detection in Thin Plates , 2001 .

[43]  A. E. Mahi,et al.  Fatigue behaviour and structural health monitoring by acoustic emission of E-glass/epoxy laminates with piezoelectric implant , 2016 .

[44]  María Sánchez,et al.  Graphene nanoplatelets coated glass fibre fabrics as strain sensors , 2017 .

[45]  I. Bond,et al.  Monitoring cure and detecting damage in composites with inductively coupled embedded sensors , 2016 .

[46]  Nezih Mrad,et al.  Fiber Optic Sensors for Structural Health Monitoring of Air Platforms , 2011, Sensors.

[47]  Victor Giurgiutiu,et al.  Structural health monitoring of an adhesive disbond through electromechanical impedance spectroscopy , 2017 .

[48]  A. Skordos,et al.  A novel dielectric sensor for process monitoring of carbon fibre composites manufacture , 2019, Composites Part A: Applied Science and Manufacturing.

[49]  S. Carrino,et al.  Finite difference model of wave motion for structural health monitoring of single lap joints , 2019, International Journal of Solids and Structures.

[50]  Raffaella Di Sante,et al.  Fibre Optic Sensors for Structural Health Monitoring of Aircraft Composite Structures: Recent Advances and Applications , 2015, Sensors.

[51]  Saad Nauman,et al.  Liquid exfoliated graphene smart layer for structural health monitoring of composites , 2017 .

[53]  Quanbao Wang,et al.  Review on composite structural health monitoring based on fiber Bragg grating sensing principle , 2013 .

[54]  V. Giurgiutiu.  Fiber-Optic Sensors , 2015 .

[55]  Mickaël Castro,et al.  Non-intrusive health monitoring of infused composites with embedded carbon quantum piezo-resistive sensors , 2016 .

[56]  A. Vautrin,et al.  Monitoring the resin infusion manufacturing process under industrial environment using distributed sensors , 2012, 1204.5153.

[57]  S. G. Prolongo,et al.  Electrically conductive functionalized-GNP/epoxy based composites: From nanocomposite to multiscale glass fibre composite material , 2016 .

[58]  P. Carlone,et al.  Unsaturated and Saturated Flow Front Tracking in Liquid Composite Molding Processes using Dielectric Sensors , 2015, Applied Composite Materials.

[59]  Pedro Corredera,et al.  Demonstration and Methodology of Structural Monitoring of Stringer Runs out Composite Areas by Embedded Optical Fiber Sensors and Connectors Integrated during Production in a Composite Plant , 2017, Sensors.

[60]  Chun-Gon Kim,et al.  Real-time detection of low-velocity impact-induced delamination onset in composite laminates for efficient management of structural health , 2017 .

[61]  Jozue Vieira Filho,et al.  A New Structural Health Monitoring Strategy Based on PZT Sensors and Convolutional Neural Network , 2018, Sensors.

[62]  Peter J. Schubel,et al.  Thermal isolation of FBG optical fibre sensors for composite cure monitoring , 2019, Sensors and Actuators A: Physical.

[64]  Lianqing Zhu,et al.  An Ultrasensitive Silicon Photonic Ion Sensor Enabled by 2D Plasmonic Molybdenum Oxide. , 2019, Small.

[65]  R. Nogueira,et al.  Three-parameter optical fiber sensor based on a tilted fiber Bragg grating , 2010 .

[66]  Laurent Pambaguian,et al.  Exploiting carbon nanotube networks for damage assessment of fiber reinforced composites , 2015 .

[67]  Jayantha Ananda Epaarachchi,et al.  Impact location determination on thin laminated composite plates using an NIR-FBG sensor system , 2015 .

[68]  Jianxin Li,et al.  Phase-shifting optical fiber sensing with rectangular-pulse binary phase modulation , 2018 .

[69]  Michael Theiler,et al.  On‐board data synchronization in wireless structural health monitoring systems based on phase locking , 2018, Structural Control and Health Monitoring.

[70]  Wahyu Kuntjoro,et al.  Using Embedded Fiber Bragg Grating (FBG) Sensors in Smart Aircraft Structure Materials , 2012 .

[71]  Kunigal Shivakumar,et al.  Failure Mechanics of a Composite Laminate Embedded with a Fiber Optic Sensor , 2005 .

[72]  Lingyu Yu,et al.  Piezoelectric Wafer Active Sensors , 2009 .

[73]  Wieslaw Ostachowicz,et al.  Delamination detection in CFRP panels using EMI method with temperature compensation , 2016 .

[74]  Konrad Markowski,et al.  Linearly chirped tapered fiber-Bragg-grating-based Fabry-Perot cavity and its application in simultaneous strain and temperature measurement. , 2017, Optics letters.

[75]  Norman Schehl,et al.  Health monitoring of structural composites with embedded carbon nanotube coated glass fiber sensors , 2014 .

[76]  Christoph Kralovec,et al.  Application of electrical impedance tomography to an anisotropic carbon fiber-reinforced polymer composite laminate for damage localization , 2018 .

[77]  Fotis Foukalas,et al.  Wireless Communication Technologies for Safe Cooperative Cyber Physical Systems , 2018, Sensors.

[78]  V. Giurgiutiu.  SHM OF AEROSPACE COMPOSITES – CHALLENGES AND OPPORTUNITIES , 2015 .

[79]  John Yen,et al.  Introduction , 2004, CACM.

[80]  Yongan Huang,et al.  Impact Monitoring for Aircraft Smart Composite Skins Based on a Lightweight Sensor Network and Characteristic Digital Sequences , 2018, Sensors.

[81]  Vidushi Sharma,et al.  Performance analysis of an improved dynamic power management model in wireless sensor node , 2017, Digit. Commun. Networks.

[82]  J. Cagáň.  Hardware implementation of electrical resistance tomography for damage detection of carbon fibre–reinforced polymer composites , 2017 .

[84]  Xinlin Qing,et al.  SMART Layer and SMART Suitcase for structural health monitoring applications , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[85]  Nobuo Takeda,et al.  Delamination detection in CFRP laminates with embedded small-diameter fiber Bragg grating sensors , 2002 .

[86]  Christian Boller,et al.  Next generation structural health monitoring and its integration into aircraft design , 2000, Int. J. Syst. Sci..

[87]  Venu Gopal Madhav Annamdas,et al.  Application of Electromechanical Impedance Technique for Engineering Structures: Review and Future Issues , 2010 .

[88]  Zahra Sharif Khodaei,et al.  Smart Patch Repair with Low Profile PVDF Sensors , 2017 .

[89]  M. Sasikumar,et al.  Graphene based strain and damage prediction system for polymer composites , 2017 .

[90]  T. Chou,et al.  An assessment of the science and technology of carbon nanotube-based fibers and composites , 2010 .