Enhanced Thermoelectric and Mechanical Performances in Sintered Bi0.48Sb1.52Te3-AgSbSe2 Composite.

Bismuth telluride alloys have dominated the industrial application of thermoelectric cooling, but the relatively poor mechanical performance of commercial zone-melting material seriously limits the device integration and stability. Here, we exhibit synergistically enhanced thermoelectric and mechanical performances of sintered Bi0.48Sb1.52Te3-AgSbSe2 composites. It is found that the increased hole concentration improves the S2σ to 40 μW cm-1 K-2 at room temperature, and the emerged various defects effectively suppress the κl to 0.57 W m-1 K-1 at 350 K. All effects harvest a highest ZT = 1.2 at 350 K along with an average ZT = 1.0 between 300-500 K in the x = 0.2 sample. Notably, AgSbSe2 addition not only optimizes the thermoelectric properties, but also enhances the mechanical performance with a Vickers hardness of 0.75 GPa. Furthermore, the isotropy of thermoelectric properties is also observably promoted by solid-phase reaction combined with high-energy ball milling and hot pressing. Our study reveals a viable strategy to improve the comprehensive performance of sintered bismuth telluride materials.

[1]  Jinfeng Dong,et al.  Weak-ferromagnetism for room temperature thermoelectric performance enhancement in p-type (Bi,Sb)2Te3 , 2021, Materials Today Physics.

[2]  G. J. Snyder,et al.  Significant Enhancement of Thermoelectric Figure of Merit in BiSbTe‐Based Composites by Incorporating Carbon Microfiber , 2021, Advanced Functional Materials.

[3]  S. Pennycook,et al.  Atomic-scale chemical mapping of copper dopants in Bi2Te2.7Se0.3 thermoelectric alloy , 2021 .

[4]  Xiaozhou Liao,et al.  Ultra‐High Thermoelectric Performance in Bulk BiSbTe/Amorphous Boron Composites with Nano‐Defect Architectures , 2020, Advanced Energy Materials.

[5]  Heping Xie,et al.  Leveraging Deep Levels in Narrow Bandgap Bi0.5Sb1.5Te3 for Record‐High zTave Near Room Temperature , 2020, Advanced Functional Materials.

[6]  Jun Jiang,et al.  Improved thermoelectric performance in PbSe–AgSbSe2 by manipulating the spin-orbit coupling effects , 2020 .

[7]  J. Zou,et al.  Advanced Thermoelectric Design: From Materials and Structures to Devices. , 2020, Chemical reviews.

[8]  Jun Jiang,et al.  Phonon Engineering for Thermoelectric Enhancement of p-Type Bismuth Telluride by Hot Pressing Texture Method. , 2020, ACS applied materials & interfaces.

[9]  Jinfeng Dong,et al.  Practical High-Performance (Bi,Sb)2Te3-Based Thermoelectric Nanocomposites Fabricated by Nanoparticle Mixing and Scrap Recycling. , 2020, ACS applied materials & interfaces.

[10]  Xinbing Zhao,et al.  Anisotropic Thermoelectric Properties of n-Type Te-Free (Bi, Sb)2Se3 with Orthorhombic Structure , 2020 .

[11]  Jun Jiang,et al.  Texture Development and Grain Alignment of Hot‐Pressed Tetradymite Bi 0.48 Sb 1.52 Te 3 via Powder Molding , 2019, Energy Technology.

[12]  Jun Jiang,et al.  Synergistically Optimized Thermoelectric Performance in Bi0.48Sb1.52Te3 by Hot Deformation and Cu Doping , 2019, ACS Applied Energy Materials.

[13]  Jun Jiang,et al.  Ultralow Lattice Thermal Conductivity in SnTe by Manipulating the Electron–Phonon Coupling , 2019, The Journal of Physical Chemistry C.

[14]  Q. Yang,et al.  Suppressing bipolar effect to broadening the optimum range of thermoelectric performance for p-type bismuth telluride–based alloys via calcium doping , 2019, Materials Today Physics.

[15]  Yue Chen,et al.  Lattice Strain Advances Thermoelectrics , 2019, Joule.

[16]  David J. Singh,et al.  Complex Band Structures and Lattice Dynamics of Bi2Te3‐Based Compounds and Solid Solutions , 2019, Advanced Functional Materials.

[17]  G. J. Snyder,et al.  The Thermoelectric Properties of Bismuth Telluride , 2019, Advanced Electronic Materials.

[18]  Gang Chen,et al.  Routes for high-performance thermoelectric materials , 2018, Materials Today.

[19]  Haijun Wu,et al.  Entropy Engineering of SnTe: Multi‐Principal‐Element Alloying Leading to Ultralow Lattice Thermal Conductivity and State‐of‐the‐Art Thermoelectric Performance , 2018, Advanced Energy Materials.

[20]  Jun Jiang,et al.  Nontrivial thermoelectric behavior in cubic SnSe driven by spin-orbit coupling , 2018, Nano Energy.

[21]  Qian Zhang,et al.  Improved thermoelectric performance of p-type Bi0.5Sb1.5Te3 through Mn doping at elevated temperature , 2018, Materials Today Physics.

[22]  G. J. Snyder,et al.  Melt‐Centrifuged (Bi,Sb)2Te3: Engineering Microstructure toward High Thermoelectric Efficiency , 2018, Advanced materials.

[23]  Xinbing Zhao,et al.  Enhancing room temperature thermoelectric performance of n-type polycrystalline bismuth-telluride-based alloys via Ag doping and hot deformation , 2017 .

[24]  Tiejun Zhu,et al.  Compromise and Synergy in High‐Efficiency Thermoelectric Materials , 2017, Advanced materials.

[25]  J. Ghatak,et al.  Ultrahigh Average Thermoelectric Figure of Merit, Low Lattice Thermal Conductivity and Enhanced Microhardness in Nanostructured (GeTe)x (AgSbSe2 )100-x. , 2017, Chemistry.

[26]  B. Ge,et al.  Promoting SnTe as an Eco‐Friendly Solution for p‐PbTe Thermoelectric via Band Convergence and Interstitial Defects , 2017, Advanced materials.

[27]  Yuan Liu,et al.  Achieving high power factor and output power density in p-type half-Heuslers Nb1-xTixFeSb , 2016, Proceedings of the National Academy of Sciences.

[28]  G. J. Snyder,et al.  Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics , 2015, Science.

[29]  Xianli Su,et al.  Mechanically Robust BiSbTe Alloys with Superior Thermoelectric Performance: A Case Study of Stable Hierarchical Nanostructured Thermoelectric Materials , 2015 .

[30]  Tiejun Zhu,et al.  Enhanced figure of merit in antimony telluride thermoelectric materials by In–Ag co-alloying for mid-temperature power generation , 2015 .

[31]  M. Kanatzidis,et al.  Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals , 2014, Nature.

[32]  Xinbing Zhao,et al.  Lattice thermal conductivity and spectral phonon scattering in FeVSb-based half-Heusler compounds , 2013 .

[33]  Dawei Liu,et al.  BiSbTe‐Based Nanocomposites with High ZT: The Effect of SiC Nanodispersion on Thermoelectric Properties , 2013 .

[34]  D. Negi,et al.  High thermoelectric performance in tellurium free p-type AgSbSe2 , 2013 .

[35]  Qingjie Zhang,et al.  High performance Bi2Te3 nanocomposites prepared by single-element-melt-spinning spark-plasma sintering , 2013, Journal of Materials Science.

[36]  M. Kanatzidis,et al.  High-performance bulk thermoelectrics with all-scale hierarchical architectures , 2012, Nature.

[37]  Heng Wang,et al.  Weak electron–phonon coupling contributing to high thermoelectric performance in n-type PbSe , 2012, Proceedings of the National Academy of Sciences.

[38]  Hui Wang,et al.  Stronger phonon scattering by larger differences in atomic mass and size in p-type half-Heuslers Hf1−xTixCoSb0.8Sn0.2 , 2012 .

[39]  Heng Wang,et al.  Convergence of electronic bands for high performance bulk thermoelectrics , 2011, Nature.

[40]  Miaofang Chi,et al.  Multiple-filled skutterudites: high thermoelectric figure of merit through separately optimizing electrical and thermal transports. , 2011, Journal of the American Chemical Society.

[41]  Tiejun Zhu,et al.  Recrystallization induced in situ nanostructures in bulk bismuth antimony tellurides: a simple top down route and improved thermoelectric properties , 2010 .

[42]  Qingjie Zhang,et al.  Unique nanostructures and enhanced thermoelectric performance of melt-spun BiSbTe alloys , 2009 .

[43]  L. Bell.  Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems , 2008, Science.

[44]  G. J. Snyder,et al.  Enhancement of Thermoelectric Efficiency in PbTe by Distortion of the Electronic Density of States , 2008, Science.

[45]  Gang Chen,et al.  Enhanced thermoelectric figure-of-merit in p-type nanostructured bismuth antimony tellurium alloys made from elemental chunks. , 2008, Nano letters.

[46]  M. Dresselhaus,et al.  High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys , 2008, Science.

[47]  H. Goldsmid,et al.  Estimation of the thermal band gap of a semiconductor from seebeck measurements , 1999 .

[48]  H. J. Goldsmid,et al.  Recent Studies of Bismuth Telluride and Its Alloys , 1961 .