Approximate method to determine the model parameters in a new crack growth rate model

Abstract Marine structures are subjected to complex loading histories and one of the most significant failure modes is fatigue. Accurate prediction of the fatigue life of marine structures is very important for both safe and economic design and operation. Now many researchers and engineers have realized that fatigue crack propagation theory can provide more rational basis to predict the fatigue life of metal structures. At the same time, more and more fatigue crack growth models are proposed along with a good understanding of metal fatigue mechanisms. However, it is difficult to determine a large number of model parameters, which restricts their use in practical engineering problems. Therefore, it is significant to study the approximate methods for estimating the model parameters in good fatigue crack growth models. In our previous work, an extended McEvily model for fatigue crack growth analysis of metal structures was proposed. This model shows promising capability to explain various fatigue phenomena. In order for the convenient use in estimating fatigue life of marine structures, the concepts and approximations of the model parameters are comprehensively studied in this paper. Based on that, more reasonable assumptions and empirical formulas to determine the parameters are recommended. The approximate method is validated by experimental results of several types of materials, which could be successfully used in simple and effective engineering analysis for marine structures.

[1]  Arthur J. McEvily,et al.  On the dependence of the rate of fatigue crack growth on the σna(2a) parameter , 2001 .

[2]  Weicheng Cui,et al.  An engineering model of fatigue crack growth under variable amplitude loading , 2008 .

[3]  Marco Antonio Meggiolaro,et al.  On the dominant role of crack closure on fatigue crack growth modeling , 2003 .

[4]  Shanyi Du,et al.  A simple engineering approach in the prediction of the effect of stress ratio on fatigue threshold , 2003 .

[5]  James C. Newman,et al.  Variations of a global constraint factor in cracked bodies under tension and bending loads , 1995 .

[6]  J. Newman,et al.  Fatigue Analyses Under Constant- and Variable-Amplitude Loading Using Small-Crack Theory , 1999 .

[7]  P. C. Paris,et al.  Threshold for Fatigue Crack Propagation and the Effects of Load Ratio and Frequency , 1973 .

[8]  Weicheng Cui,et al.  A GENERAL CONSTITUTIVE RELATION FOR FATIGUE CRACK GROWTH ANALYSIS OF METAL STRUCTURES , 2009 .

[9]  H. Saunders,et al.  Advanced Fracture Mechanics , 1985 .

[10]  Farid Taheri,et al.  Experimental and analytical investigation of fatigue characteristics of 350WT steel under constant and variable amplitude loadings , 2003 .

[11]  Arthur J. McEvily,et al.  A coaxing effect in the small fatigue crack growth regime , 1999 .

[12]  R Roberts,et al.  Delay Effects in Fatigue Crack Propagation , 1971 .

[13]  A. K. Vasudevan,et al.  Extension of the Unified Approach to fatigue crack growth to environmental interactions , 2001 .

[14]  S. Ishihara,et al.  Analysis of short fatigue crack growth in cast aluminum alloys , 2002 .

[15]  A. J. Mcevily,et al.  Crack opening displacement and the rate of fatigue crack growth , 1972 .

[16]  Weicheng Cui,et al.  THE EXTENDED MCEVILY MODEL FOR FATIGUE CRACK GROWTH ANALYSIS OF METAL STRUCTURES , 2008 .

[17]  W-C Cui,et al.  A feasible study of fatigue life prediction for marine structures based on crack propagation analysis , 2003 .

[18]  Daniel Kujawski,et al.  A fatigue crack driving force parameter with load ratio effects , 2001 .

[19]  P. Paris.  A rational analytic theory of fatigue , 1961 .

[20]  Brad L. Boyce,et al.  Thresholds for high-cycle fatigue in a turbine engine Ti–6Al–4V alloy , 1999 .

[21]  Torgeir Moan,et al.  Improved modeling of the effect of R-ratio on crack growth rate , 2007 .

[22]  Paul C. Paris,et al.  Service load fatigue damage — a historical perspective , 1999 .

[23]  Zhang Wen-ming.  A modified constitutive relation for fatigue crack growth , 2006 .

[24]  Weicheng Cui,et al.  Comparative fatigue strength assessment of a structural detail in a containership using various approaches of classification societies , 2002 .

[25]  Zhou Chi.  Determination of Fatigue Crack Growth Rate Using Existing Data , 2003 .

[26]  E. Wolf.  Fatigue crack closure under cyclic tension , 1970 .

[27]  Weicheng Cui,et al.  A state-of-the-art review on fatigue life prediction methods for metal structures , 2002 .

[28]  Brad L. Boyce,et al.  Effect of load ratio and maximum stress intensity on the fatigue threshold in Ti–6Al–4V , 2001 .

[29]  J. Newman.  A crack opening stress equation for fatigue crack growth , 1984 .