Experimental Blade Research - phase 2

[1]  John Dalsgaard Sørensen,et al.  Uncertainty modelling and code calibration for composite materials , 2013 .

[2]  Jeffrey Bennett,et al.  Quick Method for Aeroelastic and Finite Element Modeling of Wind Turbine Blades , 2014 .

[3]  Kim Branner,et al.  Non‐linear ultimate strength and stability limit state analysis of a wind turbine blade , 2016 .

[4]  Robert Bitsche,et al.  Wind turbine blade testing under combined loading , 2011 .

[5]  John Dalsgaard Sørensen,et al.  Failures in Trailing Edge Bondlines of Wind Turbine Blades , 2011 .

[6]  Martin Alexander Eder,et al.  A versatile stereo photogrammetry based technique for measuring fracture mode displacements in structures , 2015 .

[7]  Martin Alexander Eder,et al.  Measurement of local relative displacements in large structures , 2014 .

[8]  Robert Bitsche,et al.  A practical approach to fracture analysis at the trailing edge of wind turbine rotor blades , 2014 .

[9]  Jacob Wittrup Schmidt,et al.  Hybrid Testing of Composite Structures with Single-Axis Control , 2013 .

[10]  Z. Suo,et al.  Mixed mode cracking in layered materials , 1991 .

[11]  Per Hørlyk Nielsen,et al.  Damage Detection Methods on Wind Turbine Blade Testing with Wired and Wireless Accelerometer Sensors , 2014 .

[12]  Kim Branner,et al.  Compressive strength of thick composite panels , 2011 .

[13]  Robert Bitsche,et al.  A qualitative analytical investigation of geometrically nonlinear effects in wind turbine blade cross sections , 2015 .

[14]  K. Branner,et al.  COMPARISON OF TWO FINITE ELEMENT METHODS WITH EXPERIMENTS OF DELAMINATED COMPOSITE PANELS , 2011 .

[15]  Robert Bitsche,et al.  Fracture analysis of adhesive joints in wind turbine blades , 2015 .