Estimation of rail properties using semi-analytical finite element models and guided wave ultrasound measurements.

Guided wave based monitoring systems require accurate knowledge of mode propagation characteristics such as wavenumber and group velocity dispersion curves. These characteristics may be computed numerically for a rail provided that the material and geometric properties of the rail are known. Generally, the rail properties are not known with sufficient accuracy and these properties also change due to temperature, rail wear and rail grinding. An automated procedure is proposed to estimate material and geometric properties of a rail by finding the properties which, when input into a Semi-Analytical Finite Element (SAFE) model, accurately reproduce measured dispersion characteristics. Pulse-echo measurements were performed and spectrograms show the reflections from aluminothermic welds of three modes of propagation. The SAFE method was used to solve the forward problem of predicting the dispersion characteristics for specified rail properties. Dispersion curves are computed for different combinations of Poisson's ratio and three geometric parameters. These dispersion curves are scaled to cover a range of longitudinal speeds of sound of the rail material. A technique is developed to determine which SAFE model provided the best fit to the experimental measurements. The technique does not require knowledge of the distances to the reflectors; rather these distances are estimated as part of the proposed procedure. A SAFE model with the estimated rail parameters produced dispersion curves and distances in very good agreement with the measured spectrograms. In addition, the estimated mean geometric parameters agreed with the measured profile of the rail head.

[1]  Prediction of guided wave scattering by defects in rails using numerical modelling , 2014 .

[2]  Chang Chong-yi,et al.  Study on numerical method to predict wheel/rail profile evolution due to wear , 2010 .

[3]  P.W. Loveday,et al.  Analysis of Piezoelectric Ultrasonic Transducers Attached to Waveguides Using Waveguide Finite Elements , 2007, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[4]  Craig S. Long,et al.  Long range guided wave defect monitoring in rail track , 2014 .

[5]  Philip W. Loveday,et al.  Guided wave propagation as a measure of axial loads in rails , 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[6]  Ivan Bartoli,et al.  Modeling wave propagation in damped waveguides of arbitrary cross-section , 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[7]  U. Olofsson,et al.  Wear, plastic deformation and friction of two rail steels—a full-scale test and a laboratory study , 2003 .

[8]  T. Ting,et al.  Correlating modes shapes based on the modal assurance criterion , 1993 .

[9]  Monica Malvezzi,et al.  Development of a wear model for the prediction of wheel and rail profile evolution in railway systems , 2012 .

[10]  J. Rose,et al.  Guided wave dispersion curves for a bar with an arbitrary cross-section, a rod and rail example. , 2003, Ultrasonics.

[11]  L. Gavric.  Computation of propagative waves in free rail using a finite element technique , 1995 .

[12]  P. Welch.  The use of fast Fourier transform for the estimation of power spectra: A method based on time averaging over short, modified periodograms , 1967 .

[13]  Richard L. Weaver,et al.  Propagating and evanescent elastic waves in cylindrical waveguides of arbitrary cross section , 2004 .

[14]  Andrew Cornish,et al.  Life-time monitoring of in service switches and crossings through field experimentation , 2014 .

[15]  P. Loveday,et al.  Mode repulsion of ultrasonic guided waves in rails , 2018, Ultrasonics.

[16]  Juraj Gerlici,et al.  Railway wheel and rail head profiles development based on the geometric characteristics shapes , 2011 .

[17]  Rong Chen,et al.  Numerical simulation of rail profiles evolution in the switch panel of a railway turnout , 2016 .

[18]  Tsuyoshi Murata,et al.  {m , 1934, ACML.

[19]  Mohd Rapik Saat,et al.  Analysis of Causes of Major Train Derailment and Their Effect on Accident Rates , 2012 .

[20]  S. L. Grassie,et al.  Rail defects: an overview , 2003 .

[21]  V. Popov,et al.  Wear , 2019, Handbook of Contact Mechanics.

[22]  H. Bijl,et al.  New Method for Mesh Moving Based on Radial Basis Function Interpolation , 2006 .