Experimental Validation of Two‐Dimensional H2O and CO2 Co‐Electrolysis Modeling

This work details an in‐house 2D electrochemical and thermal model of solid oxide electrolysis cell (SOEC) dedicated to the simultaneous electrolysis of steam and carbon dioxide. The apparent exchange current densities for both H2O and CO2 electrochemical reductions have been fitted on single electrolysis polarization curves obtained on a standard cathode supported cell (CSC). By using these values, predictive simulations have been performed in a co‐electrolysis mode. The results have been compared to experimental data obtained in the same conditions. A good agreement is found between the simulated points and the experimental polarization curves, meaning that the model stands to predict accurately the SOEC response in co‐electrolysis mode. Simulations have been performed to investigate co‐electrolysis mechanisms in terms of partial pressures, current densities, and overpotentials distributions along the cell. The relative influence of both water gas shift (WGS) reaction and CO2 electrolysis on the global CO production is also discussed.

[1]  John T. S. Irvine,et al.  Efficient Reduction of CO2 in a Solid Oxide Electrolyzer , 2008 .

[2]  S. Chan,et al.  A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness , 2001 .

[3]  Stefano Ubertini,et al.  Experimental and numerical analysis of a radial flow solid oxide fuel cell , 2007 .

[4]  Yixiang Shi,et al.  Performance and methane production characteristics of H2O–CO2 co-electrolysis in solid oxide electrolysis cells , 2013 .

[5]  O. Deutschmann,et al.  Methane reforming kinetics within a Ni–YSZ SOFC anode support , 2005 .

[6]  S. Ebbesen,et al.  Co-electrolysis of CO2 and H2O in solid oxide cells: Performance and durability , 2011 .

[7]  Ellen Ivers-Tiffée,et al.  Oxidation of H2, CO and methane in SOFCs with Ni/YSZ-cermet anodes , 2002 .

[8]  R. Kikuchi,et al.  Investigation on the Power Generation and Electrolysis Behavior of Ni-YSZ∕YSZ∕LSM Cell in Reformate Fuel , 2008 .

[9]  N. Brandon,et al.  Hydrogen production through steam electrolysis: Model-based steady state performance of a cathode-supported intermediate temperature solid oxide electrolysis cell , 2007 .

[10]  J. Young,et al.  Thermodynamic and transport properties of gases for use in solid oxide fuel cell modelling , 2002 .

[11]  Mogens Bjerg Mogensen,et al.  Thermodynamic analysis of synthetic hydrocarbon fuel production in pressurized solid oxide electrolysis cells , 2012 .

[12]  Gerda Gahleitner.  Hydrogen from renewable electricity: An international review of power-to-gas pilot plants for stationary applications , 2013 .

[13]  S. Ebbesen,et al.  Electrolysis of carbon dioxide in Solid Oxide Electrolysis Cells , 2009 .

[14]  Lin Zhao,et al.  Electrochemical reduction of CO2 in solid oxide electrolysis cells , 2010 .

[15]  Meng Ni,et al.  Modeling of a solid oxide electrolysis cell for carbon dioxide electrolysis , 2010 .

[16]  Stuart B. Adler,et al.  Mechanism and kinetics of oxygen reduction on porous La1−xSrxCoO3−δ electrodes , 1998 .

[17]  D. Stolten,et al.  Modeling of Mass and Heat Transport in Planar Substrate Type SOFCs , 2003 .

[18]  Yu Luo,et al.  Experimental characterization and modeling of the electrochemical reduction of CO2 in solid oxide electrolysis cells , 2013 .

[19]  Yixiang Shi,et al.  Numerical modeling of an anode-supported SOFC button cell considering anodic surface diffusion , 2007 .

[20]  S. Chan,et al.  Polarization effects in electrolyte/electrode-supported solid oxide fuel cells , 2002 .

[21]  Dennis Y.C. Leung,et al.  Mathematical modeling of the coupled transport and electrochemical reactions in solid oxide steam electrolyzer for hydrogen production , 2007 .

[22]  M. Fowler,et al.  Performance comparison of Fick’s, dusty-gas and Stefan–Maxwell models to predict the concentration overpotential of a SOFC anode , 2003 .

[23]  P. Baurens,et al.  A New Stack to Validate Technical Solutions and Numerical Simulations , 2012 .

[24]  Y. Bultel,et al.  Anode-Supported SOFC Model Centered on the Direct Internal Reforming , 2005 .

[25]  J. Laurencin,et al.  Micro modelling of solid oxide electrolysis cell: From performance to durability , 2013 .

[26]  K. Lackner,et al.  Sustainable hydrocarbon fuels by recycling CO2 and H2O with renewable or nuclear energy , 2011 .

[27]  A. Virkar,et al.  Fuel Composition and Diluent Effect on Gas Transport and Performance of Anode-Supported SOFCs , 2003 .

[28]  Yu Luo,et al.  Elementary reaction modeling of CO2/H2O co-electrolysis cell considering effects of cathode thickness , 2013 .

[29]  Joongmyeon Bae,et al.  Performance of solid oxide electrolysis cell having bi-layered electrolyte during steam electrolysis and carbon dioxide electrolysis , 2011 .

[30]  Joongmyeon Bae,et al.  Electrochemical performance of solid oxide electrolysis cell electrodes under high-temperature coele , 2011 .

[31]  Mogens Bjerg Mogensen,et al.  Oxidation of hydrogen on Ni/yttria-stabilized zirconia cermet anodes , 1997 .

[32]  James E. O'Brien,et al.  Parametric study of large-scale production of syngas via high-temperature co-electrolysis , 2007 .

[33]  Ahmed F. Ghoniem,et al.  On the Predictions of Carbon Deposition on the Nickel Anode of a SOFC and Its Impact on Open-Circuit Conditions , 2013 .

[34]  G. Froment,et al.  Methane steam reforming, methanation and water‐gas shift: I. Intrinsic kinetics , 1989 .

[35]  K. Sridhar,et al.  Study of carbon dioxide electrolysis at electrode/electrolyte interface: Part I. Pt/YSZ interface , 2004 .

[36]  S. Barnett,et al.  Syngas Production By Coelectrolysis of CO2/H2O: The Basis for a Renewable Energy Cycle , 2009 .

[37]  Jonathan Deseure,et al.  Modelling of solid oxide steam electrolyser: Impact of the operating conditions on hydrogen production , 2011 .

[38]  S. Ebbesen,et al.  Durable SOC stacks for production of hydrogen and synthesis gas by high temperature electrolysis , 2011 .

[39]  Werner Lehnert,et al.  Modelling of gas transport phenomena in SOFC anodes , 2000 .

[40]  Meng Ni,et al.  Computational fluid dynamics modeling of a solid oxide electrolyzer cell for hydrogen production , 2009 .

[41]  Xingjian Xue,et al.  Modeling of Solid Oxide Electrolysis Cell for Syngas Generation with Detailed Surface Chemistry , 2012 .

[42]  Olav Bolland,et al.  Finite-volume modeling and hybrid-cycle performance of planar and tubular solid oxide fuel cells , 2005 .

[43]  Brigitte Grondin-Perez,et al.  Computing approach of cathodic process within solid oxide electrolysis cell: Experiments and continu , 2011 .

[44]  P. Bleuet,et al.  Characterisation of Solid Oxide Fuel Cell Ni–8YSZ substrate by synchrotron X-ray nano-tomography: from 3D reconstruction to microstructure quantification , 2012 .

[45]  Meng Ni,et al.  An electrochemical model for syngas production by co-electrolysis of H2O and CO2 , 2012 .

[46]  Nigel P. Brandon,et al.  Hydrogen production through steam electrolysis: Model-based dynamic behaviour of a cathode-supported intermediate temperature solid oxide electrolysis cell , 2008 .

[47]  Carl M. Stoots,et al.  2500-Hour High Temperature Solid-Oxide Electrolyzer Long Duration Test , 2009 .

[48]  S. Singhal,et al.  Polarization Effects in Intermediate Temperature, Anode‐Supported Solid Oxide Fuel Cells , 1999 .

[49]  John T. S. Irvine,et al.  (La,Sr)(Cr,Mn)O3/GDC cathode for high temperature steam electrolysis and steam-carbon dioxide co-electrolysis , 2012 .

[50]  J. Laurencin,et al.  Impact of cell design and operating conditions on the performances of SOFC fuelled with methane , 2008 .

[51]  M. Chyu,et al.  Simulation of the chemical/electrochemical reactions and heat/mass transfer for a tubular SOFC in a stack , 2003 .

[52]  S. Jensen,et al.  Hydrogen and synthetic fuel production from renewable energy sources , 2007 .

[53]  M. Fowler,et al.  Experimental and modeling study of solid oxide fuel cell operating with syngas fuel , 2006 .

[54]  Carl M. Stoots,et al.  Results of recent high temperature coelectrolysis studies at the Idaho National Laboratory , 2007 .

[55]  Meng Ni,et al.  2D thermal modeling of a solid oxide electrolyzer cell (SOEC) for syngas production by H2O/CO2 co-electrolysis , 2012 .